You may be interested in…
-
Front Bumpers
WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned To Deliver Maximum Airflow To The Engine Bay
- Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
- Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Rings
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: No
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$999.99 Add to cart -
Sequoia 2nd Gen (2008-2022)Ships FREE !!
within 48 US StatesDobinsons MRA59-A713 3-Way Adjustable Rear Shocks | Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
Suspension
Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Interior mold is hex shaped
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60713 IFP Rear Shocks for Toyota Sequoia 2008-2022
- Suits 2008-2022 Toyota Sequoia without rear air suspension, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 343mm compressed length, 489mm extended length (these are extended travel over the GS59-713 shocks)
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
$650.00 Add to cart -
Tundra 3rd Gen (2022-2024)
Dobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022+ Toyota Tundra and 2024+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
$445.00 Add to cart -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-701 Rear Shocks | Toyota 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Available in Yellow or Black
$310.00 Select options -
Bronco 2021-2024+
Ford Bronco Diff Cover by ARB | 2021+
- Suits 2021+ Ford Bronco 2-door and 4-door models with Dana 44 Rear Axle
- High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
- Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss\
- Approach/departure angle optimized by angled exterior surface
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
- Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
- Low profile drain plug design resists damage from obstacles
- Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
- Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
- Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
- Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
- Made in Red or Black, choose below
$187.00 Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A683 3-Way Adjustable MRA Front Shocks | 80 Series 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 0-3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 627mm extended, 385mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
MRA Remote Resi 3-Way Adjustable MonotubeShips FREE !!
within 48 US StatesDobinsons MRA59-A701 3-Way Adjustable MRA Shocks
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 609mm extended, 389mm compressed
- SOLD IN PAIRS
- Now comes with a longer hose and different mounting instructions
$1,150.00 Add to cart -
Excluded
Dobinsons Single Drawer – Universal Mount – Large Size
- Measures 990mm long x 535mm wide x 275mm high, 80 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Regular Ground shipping isn’t available due to potential product damage
$800.00 Select options -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s HD Tie Rod Assembly | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
- Massive 1.75″ x 0.250-wall DOM tubing Tie Rod bar
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- HD jam nuts
- Serrated Lock Washers
- The strongest JL/JT Tie Rod you can buy
- Complete assembly from one side to the other, nothing else needed
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in an Aluminum version
$427.00 Select options -
Suspension
Dobinsons GS59-705 Rear Shocks | FJ Cruiser 4Runner GX470 GX460
- Suits Toyota 4Runner 2003-2024 and Toyota FJ Cruiser, Lexus Gx470 and GX460 models 2006 to 2023, with 0-2.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-705 Specifications: 590mm extended, 355mm compressed, 50mm body size
- Made in Yellow and Black
$310.00 Select options -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)
- Used in place of original leaf bolt when adding a leaf
- Fits L59-111-R-R3 & L59-112-R-R5 ONLY
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
$5.00 Add to cart -
Suspension
Dobinsons GS59-088 Front Shocks for Toyota 4Runner Pickup (1985 to 1995)
- Suits Toyota 4Runner 1st and 2nd Gen, 1985 to 1995 models with torsion bar suspension, and Toyota Hilux/Pickup 1998 to 2004 models with IFS torsion bar suspension
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 367mm extended, 237mm compressed
$310.00 Add to cart -
WarnShips FREE !!
within 48 US StatesWARN 101445 Optional Skid Plate for Elite Bumpers JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models) WITH a Warn Elite Bumper
- Lower Bumper Skid Cover Protects Critical Components Such As Sway bar Disconnects
- Meets The Highest Quality Standards
- Built To Match Your Exact Requirements
- Easy To Install
- Limited 1 Year Warranty
Attributes
- Location: Under Bumper Mount
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Logo: Warn Logo
- Installation Type: Bolt-On
- Includes Hardware: Yes
- Drilling Required: No
- Estimated Install Time (Hours): 0.5
$265.00 Add to cart -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
$90.00 Add to cart -
Ranger 2019+ (US Spec)Ships FREE !!
within 48 US StatesDobinsons IMS Monotube IFP Front Struts | Ford Ranger USA Model 2019-2023
- IMS front struts for 0-3.0″ of lift for Ford Ranger 2019-2023 Models (USA Spec only)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Ranger IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 495mm extended, 350mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 186mm. See instructions on setting coil seat height on left
- Reuse OE strut top mount
- Can reuse OE coils and add lift via preload or add Dobinsons 1.75″ Light Load or 1.75″ Heavy Load Front Coils
- NOTE: Dobinsons Front Sway Bar Link Kit must be purchased to run Dobinsons IMS struts
$650.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
$650.00 Add to cart -
Bronco 2021-2024+On Sale For Memorial Day!!
RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door
- Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
- Includes engine (two piece), transmission and transfer-case skid plates.
- Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
- Compatible with 4×4 and Raptor models
- Simple installation and removal of all subsections for maintenance
- Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
- Smooth, flat surface that easily slides over obstacles
- Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
- Made in the USA
Original price was: $1,056.97.$951.00Current price is: $951.00. Select options -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
$105.00 Add to cart -
40 Series Land Cruiser Early (1960-1979)
Dobinsons PB59-1013K Polyurethane Leaf Spring Bush Kit for FJ/BJ40 FJ40/BJ45 25mm Eyes
- Suits 40/45 Series Land Cruisers with 25mm spring eyes front and rear
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
$85.00 Add to cart -
RecoveryShips FREE !!
within 48 US StatesDobinsons 12V Electric Winch – 12000 LBS with Synthetic Rope
- 12,000 Capacity
- 6.5HP Series Wound Motor
- 216:1 Gear Reduction
- 57 LBS Weight
- 10×4.5″ Mounting Pattern
- 6.3 x 8.3 x 21.5″ Overall Dimensions
- 64 x 224mm Drum, Automatic Braking Action
- 3 Stage Planetary Gears
- Plug in Control Range of 10 FT
- Includes Various Control Box Mounting Brackets: Control Box to Cross Rods, Motor Housing & Flat Surface/Bumper Tops
- Sealed Solenoid Box, More Powerful
- Easy Quick Flop Clutch
- Improved Casings
- Motor Housing Breather
- Includes 100FT Synthetic Rope with Hook, Aluminum Hawse Fairlead, Hand Held Control and Wireless Remote (30ft Range)
$1,245.00 Add to cart -
TimbrenShips FREE !!
within 48 US StatesTimbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series
-
Specs:
- 2,000 lb capacity
- 4,800 lb bump load capacity
- Overall kit height = 5”
- Total deflected (compressed) height = 2.75”
- Amount of deflection (compression) = 2.25”
- Click here for instructions
- Installation video from Exit Offroad
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90F00 (1/2″ spacer)
- A25723-90AD00 (1″ spacer)
$269.36 Add to cart -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-112-R Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-112-R to L59-113-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- When installed, it will be the 6th leaf down from the top of the leaf pack
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
- If you need longer u-bolts due to a lack of threads left, use UB59-437K which are 30mm longer version of UB59-453-2K Ubolts
$140.00 Add to cart -
4Runner 3rd Gen (1996-2002)Ships FREE !!
within 48 US StatesDobinsons IMS59-50225 Rear IMS Shocks for Toyota 4Runner 1990-02
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 530mm extended, 344mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
$580.00 Add to cart -
Exceptions
Dobinsons Rear Dual Roller Drawer Kit – 36 x 40 x 10 inches
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide on left side
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Universal Mount, measures 36″ Long x 40″ Wide x 10″ High, requires drilling
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$1,465.00 Select options -
ExceptionsShips FREE !!
within 48 US StatesETA is July 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart -
Wheels
Warn 106684 5 Lug Epic Wheel Hubs Center Cap – Grey
- Suits Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- Grey Finish
- Expertly Made From Premium Materials
- Meets The Highest Quality Standards
- ISO 9001: 2015, ISO 14001: 2015 CERTIFIED
- Easy To Install
- Limited 90 Day Supplier Warranty
- Wheel Series Compatibility: Moonsault/ Diamond Cutter And Jack Hammer Series Wheels
- Bolt Pattern (MM): 5×127
- Installation Type: Bolt-On
- Style: Closed
- Color: Grey
- Quantity: Single
- Bolt Pattern (IN): 5×5.00
- Material: Plastic
- Estimated Install Time (Hours): 0.25
Original price was: $27.29.$24.00Current price is: $24.00. Add to cart -
Rear Drawers
Dobinsons Rear Dual Roller Drawer Kit – 39 x 42 x 10 inches
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Universal Mount, measures 39 x 42 x 10 inches (L, W, H)
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Photos for illustration purposes and may not be actual size of product for this product page
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
$1,465.00 Select options -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s HD Aluminum Tie Rod Assembly | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
- Massive 1.825″ 7075 SOLID Aluminum Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- HD jam nuts
- Serrated Lock Washers
- The strongest JL/JT Tie Rod you can buy
- Complete assembly from one side to the other, nothing else needed
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in a steel DOM version
$502.00 Select options -
SPCShips FREE !!
within 48 US StatesSPC 25460 | UCA’s for Tacoma 98-04 & 4Runner 96-02
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
$849.96 Add to cart -
200 Series Land Cruiser (2008-2021)Ships FREE !!
within 48 US StatesDobinsons Adjustable Rear Lower Control Arms Pair | LC200 LC300 Sequoia 23+
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, and 2023+ Toyota Sequoia
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
$445.00 Add to cart -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart -
Accessories
Dobinsons Single Drawer – Universal Mount – Medium Size
- Measures 900mm long x 500mm wide x 275mm high, 75 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address. Ground shipping isn’t available due to potential product damage
$800.00 Select options -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Excluded
Dobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)
- Suits 2005-2023 Toyota Tacoma. Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Sold as a pair – they are not side-specific
$590.00 Add to cart -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
$60.00 Add to cart -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
$146.00 Select options -
Excluded
Dobinsons Pickup Rear Drawers Kit with Fridge Slide Universal Fit
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
From $1,845.00 Select options -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
$345.00 Add to cart -
Bronco 2021-2024+Ships FREE !!
within 48 US StatesFox Performance Elite Series 2.5″ Front Coilover Reservoir Pair Adjustable – 4DR Ford Bronco – 883-06-195
- Suits: Front – Ford Bronco (fullsize) 2021+ 4-Door Models
- Lift Height: 2-3″ with Sasquatch package, 3-4″ without Sasquatch package
- Requires Aftermarket UCA’s for coilover clearance and articulation
- Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
- Body Plating: Hard-anodized for a durable finish
- Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Spring Application: specific, custom progressive springs
- Shaft: 7/8″ hard chrome plated steel shafts
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: PTFE-lined, heat-treated, alloy steel spherical
- Adjustments: Ride height preload ring
- Adjuster Type: DSC – Dual Speed Compression
- Extended: 23.720″
- Compressed: 17.940″
- Travel: 5.780″
- Top Mount: OEM
- Bottom Mount: Bar Pin
- Includes Reservoir Mounts
- Exploded View Diagram »
- Installation Guide »
$2,399.95 Add to cart
Cart totals
Subtotal | $45,363.03 |
---|---|
Shipping |
Shipping to FL. |
Tax | $3,402.33 |
Total | $50,826.36 |