Armor

Showing 61–90 of 162 results

Sale!
Rock Sliders
RCI Tundra Rock Sliders | Tundra 2022-2023+
- Suits Toyota Tundra 2022+ Dual Cab Short Bed and Crew Max Short Bed
- Will not fit any long bed models
- Compatible with Hybrid and Gas models
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
  
  Sliders come STANDARD with 1.75″ DOM outer rails for uncompromised strength
  
  Heavy duty 1/4″ thick gussets on all Five legs
  
  Mitered main tube ends provide a superior aesthetic appearance that matches the contours of the truck
  
  Full length, 3/16″ frame plate and Five leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 5 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for step surface provides many benefits
  
  Added safety for kids and pets getting in and out of the vehicle
  
  Added protection to rocker panels from rocks and debris thrown from tires
  
  Dimpled surface gives added grip and provides structural rigidity to the slider
- Easy install with only basic hand tools
- Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
- All hardware provided (grade 5 & 8 hardware where applicable)
- Standard with RCI’s signature low profile rear kick-out
- Made to order from your selections below
- Tundra Sliders ship by Truck Freight! Additional Charge for home delivery
- MADE IN THE USA
Rated 5.00 out of 5
(6 reviews)
Original price was: $1,199.99.Current price is: $1,020.00. Select options
Sale!
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Tacoma Transfer Case Skid Plate
- Fits Toyota Tacoma 2005-2023
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- All models include a heavy duty 3/16″ steel cross-member- aluminum option includes a powder coated steel cross-member
- All Cross-members come powder coated black for ALL options (bare steel/aluminum and powder coat steel/aluminum)
- Direct bolt on addition to existing factory attachment points, no drilling required
- Designed around stock exhaust system
- Made in the USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $299.99.Current price is: $255.00. Select options
Sale!
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Gas Tank Skid Plate | Tacoma 2005-2023
- Fits all Toyota Tacoma from 2005-2023
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surface that easily slides over obstacles
- Material: 3/16” Steel or 1/4” 5052 Aluminum Alloy
- Weight: 3/16” Steel- 52lbs. Aluminum- 26lbs.
- Finish: Heavy Duty Black Powder Coat or Bare Metal
- Made in the USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $299.99.Current price is: $255.00. Select options
Bumpers + Roof Racks - 5th Gen 4Runner
FREE SHIPPING
within 48 US States
Warn 100022 Semi-Hidden Winch Bumper | 2014-2024 4Runner
- Suits 2014-2024 Toyota 4Runner 5th Gen (not Limited models)
- Provides Two Recovery Points For Shackles
- Low-Profile 2 Inch Grille Guard Tube Adds Frontend Protection
- Constructed Of Heavy-Gauge Steel With A Durable Black Textured Powder Coated Finish To Protect Against Corrosion
- Built-In Port For Clutch Lever Access Or Lighting (4Runner Only)
- Easy Install – No Need To Relocate The Winch Control Pack
- Limited 1 Year Warranty
- Installation Instructions
- Compatibility: Mid-Frame Winches Up To 12000 Pound Except PowerPlant/ 9.0RC/ M8274-50
- Type: Front Bumper Mount
- Includes Winch: No
- Includes Winch Carrier: Yes
- Includes Grille Guard: Yes
- Includes Brush Guard: No
- Includes Light Mounting Bar: No
- Includes Mounting Brackets: No
- Estimated Install Time (Hours): 4
- Please note the Semi-Hidden Kit is not compatible with the factory Toyota TSS system. The upper tube may interfere with it working 100% properly
Rated 5.00 out of 5
(5 reviews)
$1,149.19 Add to cart
Sale!
Bumpers - Bronco 2021+
FREE SHIPPING
within 48 US States
Warn 108160 Elite Ford Bronco Rear Bumper | 2021-2023
- Suits Ford Bronco 2021-2023 (Fullsize Bronco)
- MADE IN USA
- State-Of-The-Art Flat-Black Powder-Coated Finish Stands Up To 408 Hour Salt Spray Testing And Excellent UV Protection
- Accommodates Most 37 Inch Tires Mounted On Factory Tailgate
- Warn Ford Bronco Rear Bumper Retains Factory Receiver
- Maintains Factory Eyelets To Retain Recovery Options
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: No
- Winch Compatible: No
- Tow Hooks: Not Compatible With Tow Hooks
- D-Rings: With D-Ring Mounts
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 4
Rated 5.00 out of 5
(9 reviews)
Original price was: $1,099.99.Current price is: $925.00. Read more
Sliders Skids + Steps - FJ Cruiser Early
FREE SHIPPING
within 48 US States
Apex 2006-2014 Toyota FJ Cruiser Rock Sliders
- Suits 2006-2014 Toyota FJ Cruiser
- All Pro Offroad APEX FJ Cruiser Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- EASY BOLT ON APPLICATION
- CLASS 10.9 HARDWARE INCLUDED
- They are built from heavy-duty .120″ wall tubing
- The shape of our FJ Cruiser Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the FJ Cruiser Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock FJ Cruiser Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
Rated 5.00 out of 5
(3 reviews)
$949.00 Select options
Sale!
Skid Plates
RCI Catalytic Guards | 2003-24 4Runner / FJ / GX
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2003-2024 4Runner, FJ Cruiser (all years), GX470 and GX460 (all years)
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
- Catalytic Guard Retrofit Guide for RCI Transmission Skid Plates
Rated 5.00 out of 5
(2 reviews)
Original price was: $128.99.Current price is: $110.00. Select options
Sale!
Accessories
RCI Gas Tank Skid Plate | Toyota FJ Cruiser
- Fits all years of Toyota FJ Cruiser
- Black powder coated for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surfaces that easily slides over obstacles
- Works with factory fuel tank only
- Material: 10 Gauge Steel
- Weight: 30lbs
- Finish: Heavy Duty Black Powder Coat
- Made in the USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $316.99.Current price is: $269.00. Add to cart
Sale!
Bronco (2021-2024+)
RCI Bronco Gas Tank Skid Plate | Ford Bronco 4-Door 2021+
- Suits 2021+ Ford Bronco 4-Door
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
Rated 5.00 out of 5
(2 reviews)
Original price was: $437.99.Current price is: $372.00. Select options
Sale!
Bronco (2021-2024+)
RCI Ford Bronco Rock Sliders | 4-Door 2021-2023
- Suits 2021+ Ford Bronco 4WD 4-door models (will not fit 2-door models)
- Protects rocker panels and doors
- Frame mounted design is far stronger than body mounted sliders and disperses impacts into the truck frame rather than the sheet metal
- Full length 3/16″ frame plate and FIVE leg design guarantee a slider as strong or stronger than anything on the market
- Our sliders utilize a 2″ square main rail which is far stronger than 1.75″ round tube used by competitors
- Sliders come STANDARD with 1.75″ DOM outer rails for uncompromised strength
- Heavy duty 1/4″ thick gussets on all five legs
- More specs and details down below
- Made to order from your selections below
- Made in USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $819.99.Current price is: $697.00. Select options
Sale!
4Runner 3rd Gen (1996-2002)
RCI Engine Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma Dual Cab (won’t fit regular cab)
- Protects front two cross-members, low hanging front differential, radiator, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
Rated 5.00 out of 5
(4 reviews)
Original price was: $324.99.Current price is: $276.00. Add to cart
Sale!
4Runner 5th Gen (2010-2024)
RCI Rear 4Runner Diff Skid Plate | 2010-2024 4Runner w/KDSS
- Suits Toyota 4Runner 5th Gen 2010-2024 WITH KDSS
- Look at this other skid setup for non-KDSS models if you have a regular sway bar
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $324.99.Current price is: $276.00. Add to cart
Sale!
Front Bumpers
On Sale All November!!
Dobinsons Front Winch Bumper for Lexus GX470
- Suits Lexus GX470 from 2003 to 2009 with Fender Flares
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop.
- Suits 10000 – 12000 LB Low Mount Winches.
- Installation Instructions
- Ships to the nearest freight terminal on a pallet for you to pick up unless you add home delivery (extra cost). We will be in touch with that delivery address
Rated 5.00 out of 5
(3 reviews)
Original price was: $1,765.00.Current price is: $1,500.25. Select options
All Pro Offroad
FREE SHIPPING
within 48 US States
All Pro 2014-2024 4Runner LoPro Front Bumper Side Supports
- Side supports are only compatible with All Pro 2014+ 4Runner Low Profile Front Bumper
- BUILT 100% IN THE USA
- 3/16″ steel construction
- Zinc plated hardware
- No Drilling or welding required
- Cutting the plastic bumper is required to install side supports
- Comes in Black Powder Coat ready to install
- Weighs 25lbs
- NOTE: Not compatible with Limited Edition 4Runners
- Installation Instructions
Rated 5.00 out of 5
(3 reviews)
$516.00 Add to cart
Sale!
GX460 (2010-2023)
RCI Lexus GX460 Transfer Case Skid Plate
- Fits USA spec Lexus GX460 V8 Models 2010-2023
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Heavy duty black powder coat finish is standard on steel skid plates and available on aluminum version
- Installs in minutes
- All hardware and installation instructions provided
- All models include a heavy duty 3/16″ steel cross-member- aluminum option includes a powder coated steel cross-member
- Support Cross-member comes is black powder coated steel on both steel and aluminum skid plate options
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
Rated 5.00 out of 5
(5 reviews)
Original price was: $357.99.Current price is: $304.00. Select options
Skid Plates
FREE SHIPPING
within 48 US States
ARB 5421110 Under Vehicle Protection Kit | Toyota 4Runner 5th Gen (with KDSS)
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITH KDSS
- You must check to make sure you have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
Rated 5.00 out of 5
(9 reviews)
$575.00 Add to cart
Skid Plates
FREE SHIPPING
within 48 US States
ARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
- Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
Rated 5.00 out of 5
(11 reviews)
$966.00 Add to cart
Sale!
Tacoma 2nd Gen (2005-2015)
RCI Tacoma Rock Sliders | 2005-2015 Tacoma
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Fits 2005-2015 4wd access cab and double cab trucks
- Made to order from your selections below
- Made in USA
Rated 5.00 out of 5
(4 reviews)
Original price was: $849.99.Current price is: $722.00. Select options
Sale!
Rear Bumpers
On Sale All November!!
Dobinsons Lexus GX470 Rear Bumper with Tire and Jerry Can Carrier
- Suits Lexus GX470 from 2003 to 2009
- Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes Jerry can carrier and single spare tire carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Does not include any hitch or towing ability. Designed to work around standard type tow hitch below rear cross member
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5
(4 reviews)
Original price was: $2,860.00.Current price is: $2,431.00. Select options
Sale!
Front Bumpers
On Sale All November!!
Dobinsons 100 Series Front Bumper | Land Cruiser 100 Series IFS 1998 to 2007
- Suits all year models of Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. Removable Top Tubes
- Supplied Black, but can be painted by your paint shop. Suits 10000 – 12000 LB Low Mount Winches.
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
Rated 5.00 out of 5
(3 reviews)
Original price was: $1,765.00.Current price is: $1,500.25. Select options
Sale!
Rear Bumpers
On Sale All November!!
Dobinsons Rear Bumper for Toyota Land Cruiser 200 Series 2008-2021
- For Toyota Land Cruiser 200 Series from 2008 to 2021
- DOES NOT SUIT MODELS WITH LANE ASSIST
- Comes standard as Black Powder Coat (customer can have his local paint shop color-match as some photos show)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5
(3 reviews)
Original price was: $2,995.00.Current price is: $2,545.75. Select options
Sale!
Rear Bumpers
On Sale All November!!
Dobinsons Toyota 70 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 and 78 Series Land Cruiser Wagons pre-2007 – 5 Door Models
- Will not suit any Prado variant 70x series without modifications
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- ***Does not include Hi-Lift Jack carrier as shown in photos***
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5
(5 reviews)
Original price was: $2,860.00.Current price is: $2,431.00. Select options
Sale!
Prado 90 + 95 - RZN VZN KZN KDJ (1996-2002)
On Sale All November!!
Dobinsons Rear Bumper with Tire and Jerry Can Carrier | Prado 90 & 95
- Made for 1996-2002 Toyota Land Cruiser Prado 95 and 95 Series RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Comes standard as Black Powder Coat
- Full bolt on installation to replace your stock rear bumper
- Moves the spare tire off the back door and onto the bumper
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Choose from a single or dual jerry can carrier below
- Watch the video below for how to install it
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(0 reviews)
Original price was: $2,860.00.Current price is: $2,431.00. Select options
Sale!
Skid Plates, Sliders + Racks - Tacoma 4th Gen
Rear Control Arm Skids | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma with coil spring rear suspension
- Protects the front of the rear lower control arm links and factory link mounts on the frame
- Smooth, flat surface that easily slides over obstacles
- Black powder coat included for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Includes heavy duty hardware
- Kit includes both driver and passenger side lower link skids
- Confirmed Fitment on 24′ TRD OR only should fit all Tacoma models with rear coil suspension
- Made in USA
- Installation Instructions
(0 reviews)
Original price was: $134.99.Current price is: $128.00. Add to cart
Skid Plates - JL Wrangler
FREE SHIPPING
within 48 US States
Rusty’s JL Wrangler 3.6L Engine Skid
- Suits Jeep JL Wrangler 2018-2023 Models
- Protects the vulnerable engine oil pan
- Adds necessary protection for doing any sort of off roading
- Protect your expensive investment – engines aren’t cheap!!
- Rusty’s Skid Plate is constructed of 3/16″ thick laser-cut steel
- CNC formed for an exact fit
- Integrated access panel for oil changes
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
- Verify with the attached photos and a visual inspection of your Jeep to make sure you order the correct parts!!
Rated 5.00 out of 5
(9 reviews)
$388.00 Select options
Rusty's Off Road
FREE SHIPPING
within 48 US States
Rusty’s Rear Lower Control Arm Skid Plates Frame Side – Bare Steel | Gladiator
- Suits Jeep JT Gladiator 2020+
- Sold in Pairs
- Protects your rear control arm mounts from damage
- Keeps it all secured tightly for off roading
- Protect your expensive investment – frame repair is not cheap!!
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
Rated 5.00 out of 5
(7 reviews)
$150.00 Add to cart
Rusty's Off Road
FREE SHIPPING
within 48 US States
Rusty’s Rear Axle Lower Shock Skid Plates – Bare Steel | Gladiator
- Suits Jeep JT Gladiator 2020+
- Not compatible with shock extension brackets
- Sold in Pairs
- Protects your rear shocks and axle side shocks mounts from trail damage!
- Keeps it all secured tightly for off roading
- Protect your expensive investment – shocks aren’t cheap!!
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
Rated 5.00 out of 5
(6 reviews)
$226.00 Add to cart
Rusty's Off Road
FREE SHIPPING
within 48 US States
Rusty’s Rear Lower Control Arm Skid Plates Axle Side – Bare Steel | Gladiator
- Suits Jeep JT Gladiator 2020+
- Not compatible with shock extension brackets
- Does not include shock skid plate, as shown in some photos. Those are sold separately
- Sold in Pairs
- Protects the vulnerable low hanging control arm mounts of the rear axle
- Keeps it all secured tightly for off roading
- Protect your expensive investment – control arms aren’t cheap!!
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
Rated 5.00 out of 5
(5 reviews)
$150.00 Add to cart
Rusty's Off Road
FREE SHIPPING
within 48 US States
Rusty’s Rear Lower Control Arm Skid Plates Axle Side – Bare Steel | JL Wrangler
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models
- Not compatible with shock extension brackets
- Protects the vulnerable low hanging shock mounts of the rear axle
- Keeps it all secured tightly for off roading
- Protect your expensive investment – shocks aren’t cheap!!
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
Rated 5.00 out of 5
(10 reviews)
$150.00 Add to cart
Rusty's Off Road
FREE SHIPPING
within 48 US States
Rusty’s Rear Lower Control Arm Skid Plates Frame Side – Bare Steel | JL Wrangler
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models (not 392 though)
- Sold in pairs
- Protects the weak factory low hanging frame mounts of the rear lower control arms
- Keeps it all secured tightly for off roading
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
Rated 5.00 out of 5
(7 reviews)
$150.00 Add to cart