Your cart is currently empty!
Accessories
Showing 181–210 of 493 resultsSorted by popularity
-
4Runner 3rd Gen (1996-2002)RCI Transmission Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma V6 and 4×4 Models ONLY
- Protects transmission and second and third cross-members
- Built with laser cut 3/16″ steel
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide ANY coverage of transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- V6 and 4×4 Models ONLY – does not fit 4 cylinder models or 2 wheel drive
- Made in the USA.
(2 reviews) -
Tundra 3rd Gen (2022-2025+)RCI Engine Skid Plate | Tundra 2022+ & Sequoia 2023+
- Suits 2022 Tundra (2022-2025+) 4×4 Models Only (not for 2WD) and 2023-2025+ Toyota Sequoia 4×4
- Choose from 10 gauge steel or 1/4″ 5052 Aluminum
- Some photos show additional transmission skid plate installed as well (sold separately)
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: Steel = 45lbs. Aluminum = 30lbs
- Made to order
- Not compatible with 4″+ drop bracket lift kits (does work with all 1-3″ coilover lifts)
- Made in the USA.
(5 reviews) -
WinchesFREE SHIPPING
within 48 US StatesOVS SCAR Waterproof 12K Winch | Wire Rope | Wireless Remote
- Single Line Rated Pull: 12,000lb
- Motor: 7.0hp Series Wound
- Waterproof: IP68 Rated
- Voltage: 12V
- Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
- Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
- Gear Ratio: 218:1
- DB Output: Low (it’s quiet)
- Clutch: Rotating Ring Gear
- Braking Action: Automatic Out-Of-Drum
- Drum Size: 2.5” x 8.8”
- Mounting Bolt Pattern: 10” x 4.5”
- Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
- Line Speed: 42’ Per Minute
- Steel Cable: 3/8” x 85’
- Hook: Heavy Duty with Clip
- Fairlead: 4-Way Roller Fairlead (not pictured)
- Electric Cable: 70” x 25 mm2
- Solenoid: 500A (Heavy – Duty)
- Recommended Battery: 650CCA Minimum.
- Weight: 86 lbs
- Warranty: Limited Lifetime Warranty Mechanical,
- 5 Year Electrical
(5 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons Land Cruiser 200 Series Snorkel Kit for 2008-2015
- 200 Series Snorkel Kit – Suits Toyota Land Cruiser 200 Series 2008-2015 Models
- Smooth body, no writing or logos on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(6 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Transmission Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Does not fit 2WD Pre-Runner or 2.7L Automatic Single Cab Tacoma
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Made in USA
- Requires All-Pro IFS Skid Plate
(7 reviews) -
Front BumpersFREE SHIPPING
within 48 US States2016-23 Tacoma Steel Low Profile Front Bumper – Center Hoop
- Suits 2016-2023 Toyota Tacoma
- Ships in bare steel. You powder coat or paint it after you receive it
- This design allows you to keep the look of the OEM bumper while adding new high-quality features
- This bumper provides an increased approach angle in the front
- Made from a CNC laser cut, brake-formed, 3/16″ steel faceplate and the 1/4″ steel winch plate
- We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
- It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
- This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
- Made in the USA
- Installation Instructions
- Also available without the center hoop attached
(7 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesKing 4WD Premium TJ Wrangler Soft Top w/All Tinted Windows 1996-2006
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (not LJ Unlimited)
- Includes full soft top with upper half door windows – ALL WINDOWS ARE TINTED
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint on rear windows and TINTED front door windows
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(10 reviews) -
Front Bumpers
WARN 102146 Full Width Crawler Front Winch Bumper for JK JL & JT
- Suits Jeep Wrangler JK 2007-2017, Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned On Top Of Bumper For Easy Mounting And Access
- Standard Rock Crawler Front Bumper Features Pre-Drilled Holes For Auxiliary Lights
- Features Recessed Jack Points For Increased Recovery Options
- Has Recessed Ports And Mounts For Factory Or Auxiliary Lights
- Optional skid plate for further front-end protection, 101445
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: Yes
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Ring Mounts
- With Light Cutouts: Yes
- Light Type: Lights – Sold Separately
- With Mounting Hardware: Yes
- With Skid Plate: No, optional
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
(4 reviews) -
WinchesFREE SHIPPING
within 48 US StatesOVS SCAR Waterproof 12K Winch | Synthetic Rope | Wireless Remote
- Single Line Rated Pull: 12,000lb
- Motor: 7.0hp Series Wound
- Waterproof: IP68 Rated
- Voltage: 12V
- Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
- Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
- Gear Ratio: 218:1
- DB Output: Low (it’s quiet)
- Clutch: Rotating Ring Gear
- Braking Action: Automatic Out-Of-Drum
- Drum Size: 2.5” x 8.8”
- Mounting Bolt Pattern: 10” x 4.5”
- Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
- Line Speed: 42’ Per Minute
- Steel Cable: 3/8” x 85’
- Hook: Heavy Duty with Clip
- Fairlead: Aluminum Hawse Fairlead
- Electric Cable: 70” x 25 mm2
- Solenoid: 500A (Heavy – Duty)
- Recommended Battery: 650CCA Minimum.
- Weight: 66 lbs
- Warranty: Limited Lifetime Warranty Mechanical,
- 5 Year Electrical
(5 reviews) -
Sale!Rock Sliders
RCI Tundra Rock Sliders | Tundra 2022-2025+
- Suits Toyota Tundra 2022-2025+ Dual Cab Short Bed and Crew Max Short Bed
- Will not fit any long bed models
- Compatible with Hybrid and Gas models
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- Sliders come STANDARD with 1.75″ DOM outer rails for uncompromised strength
- Heavy duty 1/4″ thick gussets on all Five legs
- Mitered main tube ends provide a superior aesthetic appearance that matches the contours of the truck
- Full length, 3/16″ frame plate and Five leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 5 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for step surface provides many benefits
- Added safety for kids and pets getting in and out of the vehicle
- Added protection to rocker panels from rocks and debris thrown from tires
- Dimpled surface gives added grip and provides structural rigidity to the slider
- Easy install with only basic hand tools
- Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
- All hardware provided (grade 5 & 8 hardware where applicable)
- Standard with RCI’s signature low profile rear kick-out
- Made to order from your selections below
- Tundra Sliders ship by Truck Freight! Additional Charge for home delivery
- MADE IN THE USA
(6 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Tacoma Transfer Case Skid Plate 2005-2023
- Fits Toyota Tacoma 2005-2023
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- All models include a heavy duty 3/16″ steel cross-member- aluminum option includes a powder coated steel cross-member
- All Cross-members come powder coated black for ALL options (bare steel/aluminum and powder coat steel/aluminum)
- Direct bolt on addition to existing factory attachment points, no drilling required
- Designed around stock exhaust system
- Made in the USA
(3 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Gas Tank Skid Plate | Tacoma 2005-2023
- Fits all Toyota Tacoma from 2005-2023
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surface that easily slides over obstacles
- Material: 3/16” Steel or 1/4” 5052 Aluminum Alloy
- Weight: 3/16” Steel- 52lbs. Aluminum- 26lbs.
- Finish: Heavy Duty Black Powder Coat or Bare Metal
- Made in the USA
(3 reviews) -
Bumpers + Roof Racks - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesWarn 100022 Semi-Hidden Winch Bumper | 2014-2024 4Runner
- Suits 2014-2024 Toyota 4Runner 5th Gen (not Limited models)
- Provides Two Recovery Points For Shackles
- Low-Profile 2 Inch Grille Guard Tube Adds Frontend Protection
- Constructed Of Heavy-Gauge Steel With A Durable Black Textured Powder Coated Finish To Protect Against Corrosion
- Built-In Port For Clutch Lever Access Or Lighting (4Runner Only)
- Easy Install – No Need To Relocate The Winch Control Pack
- Limited 1 Year Warranty
- Installation Instructions
- Compatibility: Mid-Frame Winches Up To 12000 Pound Except PowerPlant/ 9.0RC/ M8274-50
- Type: Front Bumper Mount
- Includes Winch: No
- Includes Winch Carrier: Yes
- Includes Grille Guard: Yes
- Includes Brush Guard: No
- Includes Light Mounting Bar: No
- Includes Mounting Brackets: No
- Estimated Install Time (Hours): 4
- Please note the Semi-Hidden Kit is not compatible with the factory Toyota TSS system. The upper tube may interfere with it working 100% properly
(5 reviews) -
Sale!WinchesFREE SHIPPING
within 48 US StatesWarn 89611 Zeon 10-S Winch 10K | Synthetic Rope
- THIS ITEM IS ON CLEARANCE AND NOT ELIGILBE FOR RETURNS
- 10,000 Pound (4536 Kilogram) Single-Line Pulling Capacity
- Includes 100 Foot Of 3/8 Inch Warn Spydura Synthetic Rope, Which Includes A Temperature-Resistant Sleeve On The First Layer, A Ballistic Nylon Sliding Sleeve And A Polished Aluminum Hawse Fairlead
- Convertible Control Pack Can Be Attached To The Winch Or Remotely Mounted, Allowing For Various Winch Mounting Options And Looks
- New-Design Planetary Gear Train And Series-Wound Motor Deliver Fast, Quiet, And Reliable Pulling Power
- Satin-Black Powder-Coated Finish With Stainless Steel Fasteners And Clutch Lever Looks Great And Inhibits Corrosion. Improved Winch Sealing To Keep The Elements Out
- Large Diameter Winch Drum Reduces Rope Wear, Is Light Weight, And Has An Integrated Rope Anchor For Easy Rope Installation
- Limited 2 Year Warranty
- Winch Rating: 10000 Pound
- Recommended Use: Vehicle Recovery
- Operation Type: Electric
- Mount Type: Fixed Mount
- Voltage: 12 Volt
- Free Spooling: Yes
- Line Length (FT): 100 Feet
- Line Material: Synthetic
- Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
- Brake Type: Automatic Cone
- Max Amp Draw: 409 Amp Draw At 10000 Pound
- Gear Reduction Ratio: 261:1
- Includes Mounting Hardware: No
- Thermal Shutoff: No
- Color: Black
- Fairlead Type: Hawse
- Remote Type: Wired
- Line Speed At Max Pull: 4.8 Feet Per Minute At 10000 Pound
- Electrical Control Type: Contactors
- Motor Type: Series Wound
- Drive Gear Type: Planetary
- Line Diameter (IN): 3/8 Inch
- Mounting Hole Quantity: 4
- Drum Material: Aluminum
- Estimated Install Time (Hours): 2
- Warn Warranty information is all listed here: https://www.warn.com/warranties
(10 reviews) -
WinchesFREE SHIPPING
within 48 US StatesWarn 103253 VR Evo 10-S Winch 10K | Synthetic Rope
- Winch; VR10-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 10000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
- Black Tactical Look Puts You At The Head Of The Off-Road Pack
- Waterproof Albright® Contactor Control For The Ultimate In Reliability
- One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
- Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
- Powerful, Efficient Series-Wound Motor
- Best-In-Class Load-Holding Cone Brake For Superior Control
- Limited 7 Year Warranty
-
Winch Rating: 10000 Pound
- Recommended Use: Jeep/Truck/SUV
- Operation Type: Electric
- Mount Type: Fixed Mount
- Voltage: 12 Volt
- Free Spooling: Yes
- Line Length (FT): 90 Feet
- Line Material: Synthetic
- Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
- Brake Type: Spring Applied Disc
- Max Amp Draw: 358 Amp Draw At 1000 Pound
- Gear Reduction Ratio: 218:1
- Includes Mounting Hardware: Yes
- Thermal Shutoff: No
- Color: Black
- Fairlead Type: Hawse
- Remote Type: Wired
- Line Speed At Max Pull: 5.2 Feet Per Minute At 1000 Pound
- Electrical Control Type: Contactors
- Motor Type: Series Wound
- Drive Gear Type: Planetary
- Line Diameter (IN): 3/8 Inch
- Mounting Hole Quantity: 4
- Drum Material: Steel
- Estimated Install Time (Hours): 2
- Warn Warranty information is all listed here: https://www.warn.com/warranties
(5 reviews) -
Bumpers - Bronco 2021+FREE SHIPPING
within 48 US StatesWarn 108160 Elite Ford Bronco Rear Bumper | 2021-2023
- Suits Ford Bronco 2021-2023 (Fullsize Bronco)
- MADE IN USA
- State-Of-The-Art Flat-Black Powder-Coated Finish Stands Up To 408 Hour Salt Spray Testing And Excellent UV Protection
- Accommodates Most 37 Inch Tires Mounted On Factory Tailgate
- Warn Ford Bronco Rear Bumper Retains Factory Receiver
- Maintains Factory Eyelets To Retain Recovery Options
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: No
- Winch Compatible: No
- Tow Hooks: Not Compatible With Tow Hooks
- D-Rings: With D-Ring Mounts
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 4
(9 reviews) -
Sliders Skids + Steps - FJ Cruiser EarlyFREE SHIPPING
within 48 US StatesApex 2006-2014 Toyota FJ Cruiser Rock Sliders
- Suits 2006-2014 Toyota FJ Cruiser
- All Pro Offroad APEX FJ Cruiser Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- EASY BOLT ON APPLICATION
- CLASS 10.9 HARDWARE INCLUDED
- They are built from heavy-duty .120″ wall tubing
- The shape of our FJ Cruiser Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the FJ Cruiser Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock FJ Cruiser Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
(3 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesApex 2010-2024 Toyota 4Runner Rock Sliders
- Suits 2010-2024 Toyota 4Runner without XREAS Suspension
- All Pro Offroad APEX 4Runner Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- They are built from heavy-duty .120″ wall tubing
- The shape of our 4Runner Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the 4Runner Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock 4Runner Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
(3 reviews) -
270° AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 270LTE Driver Side 270 Degree Awning
- Driver Side Mount
- The Overland Vehicle Systems Nomadic 270LTE Awning is the perfect solution for anyone in need of reliable, free-standing shelter.
- Made with quality materials, this awning provides up to 75 square feet of coverage and can be used at a full 270 degrees.
- The Overland Vehicle Systems Nomadic 270LTE Awning is both easy to set up
- The Nomadic 270LTE Awning is supported by 4 integrated drop-down legs, 4 integrated 1-1/8″ tubular heavy-duty rafters supported on a Heavy-Duty Aluminum Frame.
- The Nomadic 270LTE Awning is made from 280G poly cotton rip stop material with heat sealed seams, easily folds, and secures in a 1000g PVC cover.
- This Nomadic 270LTE awning features a universal “L” mounting bracket solution that can be mounted onto a variety of roof racks, making it perfect for your off-road rig.
- The awning comes with a 4-year warranty, ensuring your satisfaction.
(8 reviews) -
JK Wrangler (2007-2018)FREE SHIPPING
within 48 US StatesKing 4WD Premium Jeep JK 2 Door Soft Top w/ Tinted Windows | 2010-2018
- Suits 2010-2018 Jeep Wrangler JK 2 Door soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(6 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesKing 4WD Premium TJ Wrangler Soft Upper Door Windows 1996-2006
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (and LJ Unlimited) with Factory Half Door and Soft Door Uppers
- Does not include any framework
- Includes left and right side windows
- Black Diamond Fabric with clear windows
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Also available with Tinted Windows
- We also sell a full soft top with replacement soft half door uppers as well, click for details
(8 reviews) -
Sidekick/Tracker (1988-1998)FREE SHIPPING
within 48 US StatesKing 4WD Premium Soft Top w/ Tinted Windows, 1989-1994 Suzuki Sidekick Geo Tracker
- Suits 1989-1994 Suzuki Sidekick and Geo Tracker 2-door soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(8 reviews) -
Accessories
RCI Gas Tank Skid Plate | Toyota FJ Cruiser
- Fits all years of Toyota FJ Cruiser
- Black powder coated for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surfaces that easily slides over obstacles
- Works with factory fuel tank only
- Material: 10 Gauge Steel
- Weight: 30lbs
- Finish: Heavy Duty Black Powder Coat
- Made in the USA
(3 reviews) -
4Runner 4th Gen (2003-2009)
RCI 4th Gen 4Runner V8 Transmission Skid Plate 2003-2009
- Fits Toyota 4Runner V8 Models 2003-2009
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(6 reviews) -
Bronco (2021-2025+)
RCI Bronco Gas Tank Skid Plate | Ford Bronco 4-Door 2021+
- Suits 2021+ Ford Bronco 4-Door
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
(2 reviews) -
Sale!Bronco (2021-2025+)
RCI Ford Bronco Rock Sliders | 4-Door 2021-2023
- Suits 2021+ Ford Bronco 4WD 4-door models (will not fit 2-door models)
- Protects rocker panels and doors
- Frame mounted design is far stronger than body mounted sliders and disperses impacts into the truck frame rather than the sheet metal
- Full length 3/16″ frame plate and FIVE leg design guarantee a slider as strong or stronger than anything on the market
- Our sliders utilize a 2″ square main rail which is far stronger than 1.75″ round tube used by competitors
- Sliders come STANDARD with 1.75″ DOM outer rails for uncompromised strength
- Heavy duty 1/4″ thick gussets on all five legs
- More specs and details down below
- Made to order from your selections below
- Made in USA
(3 reviews) -
AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Universal Awning Mounting Brackets Kit with Hardware
- Awning Bracket kit with universal hardware
- For Nomadic awnings 180 & 270
- Could potentially be used with pretty much any brand large awning with a 4.5″ spread mounting channel
- Set up is quick
- Easy to use
- Durable and long lasting
- See diagram below for full mounting surface and measurements
- Ordering 1 kit brings 3 steel awning brackets and universal hardware, to suit up to the longest awning
- Pay attention to the dimension diagram listed below for the mounting surface where the awning goes, as it’s a 4.5″ spread
(3 reviews) -
4Runner 3rd Gen (1996-2002)
RCI Engine Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma Dual Cab (won’t fit regular cab)
- Protects front two cross-members, low hanging front differential, radiator, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(4 reviews) -
4Runner 5th Gen (2010-2024)
RCI Rear 4Runner Diff Skid Plate | 2010-2024 4Runner w/KDSS
- Suits Toyota 4Runner 5th Gen 2010-2024 WITH KDSS
- Look at this other skid setup for non-KDSS models if you have a regular sway bar
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
Sale!100 Series Land Cruiser IFS (1998-2007)
Dobinsons Full Length Land Cruiser 100 Series Roof Rack 1998-2007
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Includes 100 Series specific mounting rails for installation
- Photo shows gutter mounts still attached to the rack, but they are not used on the 100 Series
- Will cover roof rack, but it will still open
- US-model 100 Series have a roof trim in the tracks of the roof that needs to be peeled back and trimmed off to access the forward-most mounting hole in the roof
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes vehicle-specific fitting kit to secure the rack to your roof
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
(8 reviews)
