Your cart is currently empty!
Accessories
Showing 241–270 of 473 resultsSorted by popularity
-
AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 4.5FT Awning (1.3M) – With Black Cover
- 30 Square Feet of Covered Shelter, 600D Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover With 10 pound Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
(3 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421110 Under Vehicle Protection Kit | Toyota 4Runner 5th Gen (with KDSS) 2010-2024
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITH KDSS
- You must check to make sure you have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(9 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
- Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(11 reviews) -
-
ARB
ARB715LB Orange Snatch Strap Recovery 30′ x 4 1/3″ (33000 LB)
- A snatch strap is a Kinetic strap that stores energy to magnify the pulling power during a vehicle recovery
- Min. breaking strength: 15,000kg / 33,000 lb Specifically designed to stretch under load for maximum performance
- An ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present
- Length: 9m / 30 feet. Width: 110mm / 4 1/3″
- Material: 100 percent nylon, Elasticity: Stretch (genuine) 20 percent. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
- Reinforced Eyes. For vehicle recovery, a snatch strap is more suitable than a tow strap.
- All ARB snatch straps are woven and fabricated to ARB specifications, and tested by a NATA approved laboratory
- Part no. ARB715LB
- Min. breaking strength: 15,000kg / 33,000 lb
- Length: 9m / 30 feet
- Width: 110mm / 4 1/3″
- Elasticity: Stretch (genuine) 20%
- Material: 100% nylon
- Reinforced eyes: yes
- Eye & seam protector sleeves: yes
(12 reviews) -
ARB
ARB505 E-Z Deflator Kit 10-60 PSI Rapid Air Down Offroad Kit
- Corrosion resistant brass/stainless deflator tool
- Fully geared, solid brass precision movement
- Protective rubber gauge guard
- Easy to read dial with one PSI increments
- Includes updated canvas pouch for storage
- Original analog design, newer digital version is now also offered
(10 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Tacoma Snorkel SS171HP – Toyota Tacoma 2nd Gen 2005-2015
- Suits Toyota Tacoma 2005-2015 Models – 2nd Gen Tacoma
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions.
- Vehicle specific design and factory airbox adaption fitment.
- Manufactured using durable, UV stable cross linked polyethylene material.
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets.
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream.
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(25 reviews) -
Tacoma 2nd Gen (2005-2015)
RCI Tacoma Rock Sliders | 2005-2015 Toyota Tacoma
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Fits 2005-2015 4wd access cab and double cab trucks
- Made to order from your selections below
- Made in USA
(4 reviews) -
Rear Bumpers
Dobinsons Lexus GX470 Rear Bumper with Tire and Jerry Can Carrier
- Suits Lexus GX470 from 2003 to 2009
- Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes Jerry can carrier and single spare tire carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Does not include any hitch or towing ability. Designed to work around standard type tow hitch below rear cross member
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(14 reviews) -
Front Bumpers
Dobinsons 100 Series Front Bumper | Land Cruiser 100 Series IFS 1998 to 2007
- Suits all year models of Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. Removable Top Tubes
- Supplied Black, but can be painted by your paint shop. Suits 10000 – 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Rear Bumpers
Dobinsons Land Cruiser 70 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 and 78 Series Land Cruiser Wagons pre-2007 – 5 Door Models
- Will not suit any Prado variant 70x series without modifications
- Comes standard as Black Powder Coat
- 542mm (21.3″) wing length (length of the side wings from the rear bumper forward down the bottom of the quarter panel)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- ***Does not include Hi-Lift Jack carrier as shown in photos***
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(15 reviews) -
LightingFREE SHIPPING
within 48 US StatesDobinsons Zenith 7.25″ LED Off-Road Driving Lights – 85W (Pair)
- 7.25” driving lights built for outdoor and off-road use
- 19 x 5W high-performance OSRAM LEDs
- 8000-lumen effective output with 85W power draw
- 40° spot beam for focused, long-range illumination
- 7 AMP draw @ 12V DC system
- Multi-finned heat sink for optimal thermal management
- IP68-rated – dustproof and waterproof
- Durable polycarbonate lens resists impacts and ensures clarity
- Includes Deutsch connector for secure, easy installation
- Comes with anti-theft hardware and protective lens covers
- Sold as a Pair
- This does not come with a wiring harness, sold separately as part number DL80-3782 for a pair of driving lights
(10 reviews) -
LightingFREE SHIPPING
within 48 US StatesDobinsons 8.25″ Zenith 155 Watt LED Driving Light Pair with 12700 Raw Lumens
- 155w (9 – 32v DC), 210mm (8.25″) Diameter to fit most front aftermarket bumper designs
- 4 x 20 Watt 6000K Long Distance Center LED’s
- 15 x 5 Watt 6000K Spread Center LED’s
- 50,000+ Hours Life Span
- Highly resistant to vibration and corrosion
- IP68 Water and Dust Proof Rating
- 12,700 Raw Lumens Per Light, 25,400 Per Pair!!!
- Poly carbonate Smash Resistant Lens
- Heavy Duty Braced Steel Mount
- Wiring Harness sold separately (if needed)
(18 reviews) -
Fridge/FreezersFREE SHIPPING
within 48 US StatesDobinsons 4×4 12V Portable 50L Fridge Freezer w/FREE cover
- Utilizes Highest Quality Danfoss BD-35F Compressor – Maximum Cooling Efficiency with Minimal Power Drain
- 12/24V DC, comes with AC 240V external adapter, Includes FREE Cover
- Suitable for car, truck, SUV, RV, Boat, Bus, Ambulance, Travel Trailers
- Integrated 3 stage low voltage cut-off battery protection with auto restart
- High quality insulation to minimize exterior sizing but maximize internal capacity
(5 reviews) -
Fridge/FreezersFREE SHIPPING
within 48 US StatesDobinsons 4×4 12V Portable 40L Fridge Freezer
- Utilizes Highest Quality Danfoss BD-35F Compressor – Maximum Cooling Efficiency with Minimal Power Drain
- 12/24V DC, comes with AC 240V external adapter
- Suitable for car, truck, SUV, RV, Boat, Bus, Ambulance, Travel Trailers
- Integrated 3 stage low voltage cut-off battery protection with auto restart
- High quality insulation to minimize exterior sizing but maximize internal capacity
(5 reviews) -
Snorkel
Dobinsons 4×4 Snorkel Kit | Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985-07 3.4L/4.0L
- Dobinsons SN59-3374 Suits 4.0L Diesel, 4.0L Petrol, 3.4L Diesel
- 1985 to 2007 (Narrow Front) 70 Series Toyota Land Cruisers, including the 70, 71, 73, 74, 75, 78, and 79 Series variant
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
(8 reviews) -
Recovery
Dobinsons 4×4 Off Road Rapid Tire Deflator with Gauge and Pouch
- 0-60 PSI Gauge Included at 1PSI Increments, giving easy and accurate readings
- Quick Release Coupling to Allow Pressure Checking at any time during Deflation
- Corrosion Resistant Brass Fittings for Long Life
- Includes Carry Case
- Combine with Dobinsons Air Compressor and Deluxe Tire Repair Kit for a Complete Tire Maintenance Package
(7 reviews) -
Awnings
Dobinsons 4×4 Roll Out Awning 4.6FT x 6.5FT Small Size with LED Light
- Measures 1.4M (4.6FT) against the vehicle, extending out 2.0M (6.5FT) away from the vehicle
- Heavy Duty Waterproof, Breathable Rip-stop 420D PU Oxford Polyester
- Could mount to left or right hand side or facing rear, due to small size
- Complete with Fitting Instructions & Tools, Poles, Ropes & Pegs
- Quick, Simple Setup & Pack Up. Manually opens and closes (not automatic)
- Included LED Strip Light
(10 reviews) -
Performance Upgrades - Tundra 2nd Gen
TG Hub-Centric Wheel Spacers Pair 5×150 | From 3/4″ to 2.0″
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 REAR WHEELS ONLY
- Front and Rear for these: 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570, 2008-2022 Toyota Sequoia, 2007-2021 Toyota Tundra
- Multiple thickness options from 3/4″ up to 2.0″ thick
- 5x150mm Bolt Pattern
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- Class 10.9 M14-1.5 studs and nuts
- For Toyota and Lexus Vehicles with Hub-Centric Wheels (must be Hub-Centric)
- Sold in Pairs
- NOTE! Please verify pattern before ordering!
- See vehicle list down below
- On the ¾” & 1” thick wheel spacers, you will need to trim your wheel studs in order for the wheel to seat on the face of the wheel spacer
- Sold in Pairs
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(4 reviews)$147.44 – $172.07 Select options This product has multiple variants. The options may be chosen on the product page -
Colorado (USA Model)
TG Chevy Colorado GMC Canyon 1.25″ Wheel Spacers Pair
- Suits 2015-2020 Chevy Colorado and GMC Canyon
- Adds 1.25″ width per side
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- 6x120mm lug bolt pattern
- Grade 8 Nuts and Bolts
- Sold in Pairs
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(5 reviews) -
Samurai
TG Suzuki Samurai Wheel Spacers Pair 5×5.5 | From 1″ to 2″
- Suits 1986-1995 Suzuki Samurai and 1990-1995 Suzuki Jimny
- Multiple thickness options from 1.0″ up to 2.0″ thick
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- Class 10.9 M12-1.25 studs & lug nuts
- 5 on 5.5″ [139.7 mm] lug pattern
- 4.25″ [108 mm] center bore
- Sold in Pairs
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(6 reviews)$147.07 – $172.07 Select options This product has multiple variants. The options may be chosen on the product page -
Lighting
Dobinsons Wiring Harness for 7.25″ LED Lights
- Suitable for Zenith 7.25″ driving light LED Pair, SKU DL80-3775K
- Includes switch, relay, and wiring harness, plug and play style
- Water proof light connector, harness comes with 1 x male plug end
- Very fast to install
- May suit other brands of lights, check connection photo for verification
(0 reviews) -
Sale!RCI Off Road
RCI Nissan Frontier Skid Plate Package | 2005-2025
- Suits 4-Door 4×4 Models Only Nissan Frontier D40 2005-2021 and Frontier D41 2022-2025+
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Choose your options down below
- Weights: Full Steel Set: 160 lbs. Full 1/4″ Aluminum Set: 79 lbs
- Made in Colorado, USA
(0 reviews) -
Bumpers + Roof Racks - LC250
Toyota Land Cruiser 250 Front Bumper – High Clearance
- Suits 2024+ Toyota Land Cruiser 250 Series and Land Cruiser Prado 250 Series
- 100% Australian Made In-House
- +- 136lbs add weight
- Air Bag Compliant
- PDC sensor mounts
- Retains functional radar and front camera
- 5mm Steel Construction
- 10mm Thick Mounting Plate With Eyelet
- 2 3/8 inch (60.3mm) Tube With 0.156″ (3.9mm) DOM Wall
- Included Satin Black Powder Coat
- Power coat can be painted over by your local paint shop to color match your vehicle, and also to add extra protection for longer life
- All bumpers are grit blasted, zinc powder primed, and powder coated satin black
- Low Mount Winch Compatible (with remote-mounted control box)
- Roadvision ADR Approved Indicator
- Roadvision Recessed Accessory Light ( Compatible with Baja designs S2s )
- 4 x Antenna / Aerial Mounts
- 9″ Spot / Driving Light Compatible
- Note: It is highly recommended to add shipping insurance during checkout in case the freight line damages or scratches it in transit.
(0 reviews) -
Bumpers + Racks - Lexus GX460
RCI Lexus GX460 Full Length Aluminum Roof Rack 2010-2023
- RCI Lexus GX460 Full Length Aluminum Roof Rack – suits 2010-2023 models
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, roto-pax, spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is the only one on the market that utilizes injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes and rubber load bearing pads at front of rack.
- Rack is only 3″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs ONLY 54lbs
- Installation Guide
- Made in the USA
(6 reviews) -
Roof Racks
RCI Toyota Land Cruiser 250 Aluminum Roof Rack | 2024+
- Suits 2024+ Toyota Land Cruiser 250 and Toyota Land Cruiser Prado 250
- Versatile Mounting Options: Mount a wide range of accessories on your vehicle, including lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, Quick Fist mounts, RotoPax, spare tires, bike mounts, roof baskets, and more.
- Heavy Duty Design: Engineered to support heavy gear, including roof top tents, ensuring long-lasting durability and strength.
- Premium Build Materials: Constructed with 1/4″ 5052 aluminum laser-cut side panels and rear fairing, 1″ x 2″ black anodized aluminum T-slot crossbars, and a 1/8″ 5052 aluminum front fairing for added strength and stability.
- CNC Deburring Process: All aluminum components undergo a CNC deburring process to eliminate sharp edges, providing a high-end, clean finish.
- Simplified Accessory Installation: T-Slot crossbars are machined to accept nut plates and carriage bolts, making it easy to install accessories without removing the bars.
- Superior Aerodynamics & Fit: Front wind fairing matches the roof and windshield contour, offering a superior fit, finish, and improved aerodynamics.
- Complete Installation Kit: Includes rubber trim and all necessary hardware for a quick and hassle-free installation process.
- Innovative Mounting System: Features injection-molded rubber mounting blocks that lift and cushion the roof rack feet, completely sealing out moisture without the need for silicone.
- Unlimited Accessory Options: Built-in side panel slots provide endless options for adding accessories like handles, side lighting, awning mounts, and more.
- Easy, Bolt-On Design: The rack uses existing roof rack mounting holes, with no need to remove or alter your roof antenna.
- Low-Profile Design: Rack sits only 1.75″ above the highest point of your truck (excluding the antenna), providing a sleek, aerodynamic look.
- Industry-Standard Compatibility: T-slot crossbars are compatible with hundreds of accessories, enhancing the versatility of your rack.
- Durable Powder Coat Finish: Finished with a heavy-duty black textured powder coat and an additional epoxy primer for an ultra-durable, long-lasting finish.
- Premium Hardware: Includes black stainless steel hardware and trim, at no extra charge, to ensure a secure and stylish installation.
- Easy Assembly: Simple bolt-together assembly takes about 45 minutes, with all hardware and instructions provided.
- Lightweight & Strong: Weighs approximately 39 lbs, balancing durability with a manageable weight for easy installation and use.
- Allow 1-6 weeks production/build time
- Installation Guide
(0 reviews) -
Accessories
Dobinsons Toyota Hilux Revo Rear Bumper with Tire + Jerry Can Carrier
- Made for Toyota Hilux Revo 2016-2024 4×4 models
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes Left side single or dual Jerry Can carrier and right side Tire Carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(3 reviews) -
Rear Drawers
Dobinsons DW59-021K Wing Side Panel Kit | Toyota Hilux Vigo
- Suits Toyota Hilux Vigo 2005-2015
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(6 reviews) -
Hilux Vigo (2005-2015)
Dobinsons Toyota Hilux Vigo Rear Drawers Kit with Fridge Slide
- Suits Toyota Hilux Vigo 2005-2015
- Must remove factory bed liner if it’s installed
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed
- You can add an optional side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
(5 reviews) -
Hilux Vigo (2005-2015)
Dobinsons 4×4 Snorkel Kit | Toyota Hilux Vigo 4.0L Gas Engine
- Suits Toyota Hilux Vigo 2005-2015 with the 4.0L gasoline engine
- If you have a diesel engine, use This One
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(7 reviews)
