You may be interested in…
-
ARB
ARB505 E-Z Deflator Kit 10-60 PSI Rapid Air Down Offroad Kit
- Corrosion resistant brass/stainless deflator tool
- Fully geared, solid brass precision movement
- Protective rubber gauge guard
- Easy to read dial with one PSI increments
- Includes updated canvas pouch for storage
- Original analog design, newer digital version is now also offered
$54.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A684 3-Way Adjustable MRA Front Shocks | 80 Series 6″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 728mm extended, 432mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
Dobinsons
Dobinsons PB45-1095K Rear Polyurethane Leaf Spring Bush Kit
- Suits Nissan Frontier D40 All Years, Nissan Frontier D41 2022+, Nissan Xterra (2005-2015), Nissan Navara D40 All Years
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
$90.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons Tubular UCA Kit | Land Cruiser 200 Series + Lexus LX570
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
$795.00 Add to cart -
Camping EquipmentShips FREE !!
within 48 US StatesOVS Tilt Fridge Slide – Refrigerator Tray With Slide and Tilt
- The fridge slide allows easier access when the fridge is positioned at height.
- It also helps to clear the canopy or back doors when there isn’t space to open the lid.
- Built from both Stainless Steel and Aluminum, this tilting fridge slide offers good strength without adding excessive weight.
- 4 Tie downs points that will allow you to secure your load
- Two Stage dual powder coat with a 5 Year finish warranty
- Stainless steel runners with sealed stainless-steel bearings
- Easy to use Locking mechanisms
- Marine grade stainless steel hardware
$449.99 Add to cart -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-701 Rear Shocks | Toyota 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Available in Yellow or Black
$310.00 Select options -
Expedition 2008-2017 119in Wheelbase
Dobinsons Front Struts for Ford Expedition 119″ WB 2008-2013
- Suits the front of Ford Expedition 119″ wheelbase, from 2008-2013
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs, one for the left side and one for the right side
- Stocked here in the USA
- Photo for illustration purposes only
$350.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A649 3-Way Adjustable Rear Shocks for Toyota
- Suits various vehicles, list is down below
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- 626mm extended, 400mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,150.00 Add to cart -
RecoveryShips FREE !!
within 48 US StatesOverland Vehicle Systems Digital Tire Deflator with Valve Kit & Storage Bag
- Oversized Digital Gauge
- Heavy Duty Rubber Protective Cover
- Illuminated Display
- Anti Rust Brass and Stainless Steel Components
- Reinforced Nylon Wrapped Air line
- 3 Inch Circle Dial
- 17 Inch Hose
- Removes The Valve Core For Fastest Deflation
- Instantly Read The PSI
$34.99 Add to cart -
AccessoriesShips FREE !!
within 48 US StatesDobinsons 4Runner Snorkel Kit for 4Runner 5th Gen 2010-2024
- Dobinsons 4Runner Snorkel kit for the 5th Gen models from 2010 to 2024
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Sure, you have to drill some holes, but installing front or rear bumpers also requires a lot of trimming, so why not add a snorkel!!
$395.00 Add to cart -
Performance Upgrades - FJ Cruiser LateShips FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYPowerbrake D-Line HP Rotor and Pad Kit | FJ Cruiser Front
- Suits Toyota FJ Cruiser 2006-2014 Front
- Also available for the REAR
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
$810.00 Add to cart -
200 Series Land Cruiser (2008-2021)
Dobinsons SC59-006 Pair of Strut Top Plates | Land Cruiser 200 Series 2007-21
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product is exactly the same as photo attached
- Assembly Instructions
$120.00 Add to cart -
Steering - Jeep JKShips FREE !!
within 48 US StatesRusty’s HD Aluminum Tie Rod Assembly | JK Wrangler
- Fits: 2007-2018 Jeep Wrangler JK Models
- Massive 1.825″ 7075 Solid Aluminum Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- Machined hexed ends for easy adjustment
- Zinc Plated tie rod ends for protection and long life
- HD jam nuts
- Serrated Lock Washers
- The strongest JK Tie Rod you can buy
- Built in Rainbow City, Alabama, USA
- Also made in a steel DOM version
$459.00 Add to cart -
Sequoia 2nd Gen (2008-2022)Ships FREE !!
within 48 US StatesDobinsons MRA59-A713 3-Way Adjustable Rear Shocks | Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
Shocks + Coilovers - Bronco 2021+Ships FREE !!
within 48 US StatesDobinsons IMS Monotube IFP Front Struts | Ford Bronco 2021+
- IMS front struts for Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″). See instructions on setting coil seat height on left
- Reuse OE strut top mount
$650.00 Add to cart -
Steering - Jeep JKShips FREE !!
within 48 US StatesRusty’s HD Aluminum Drag Link Assembly | JK Wrangler
- Fits: 2007-2018 Jeep Wrangler JK Models
- A drag link connects from the Pitman Arm of the Steering Box down to the knuckle on the wheel
- Massive 1.825″ 7075 Aluminum Drag Link
- Adjustable forged ends are threaded for adjustment without removing the drag link from the vehicle
- Machined hexed ends for easy adjustment
- Zinc plated tie rod ends for protection and long life
- Polished to a “like Chrome finish”
- HD jam nuts
- Serrated Lock Washers
- The strongest JK Drag Link you can buy
- Built in Rainbow City, Alabama, USA
- Also available in a steel DOM version
$459.00 Add to cart -
ARB
ARB510 ARB Air Systems E-Z Tire Deflator with Digital Gauge and Pouch
- Easily lower your tire pressure with a clear digital readout, while you prep your vehicle to hit the trails
- Lowering your tire pressure is a MUST when going offroad for increase comfort, better traction, better tire pattern, and higher performance from your vehicle
- Easy-to-read blue backlit display screen, Large LCD digital readout
- Multiple measurements available: 0-14 bar, 0-200 psi, 0-1400 kpa, 0-14 KgF
- Auto switch off, Auto switch on
- 250mm braided line
- High-quality brass components and crimps
- Rubber bump guard to protect against drops
- Screw-on chuck suits all Schrader valves
- Accuracy to +/- 1psi at 15-75psi
- Includes updated larger canvas pouch for storage
$83.00 Add to cart -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-540 1.4″ Land Cruiser 200 Series Front Coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 435/430mm free height, 19mm wire, 580LB rate
- Sold as a Pair
$270.00 Select options -
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons IMS59-50701 IMS Shocks | Toyota and Lexus (0-3″ lift)
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Specifications: 598mm extended, 389mm compressed
$580.00 Add to cart -
Expedition 2008-2017 119in Wheelbase
Dobinsons C19-431 1.75″ Lift Rear Coils | Ford Expedition 2008-2017
- 1.75″ rear lift coils for a Ford Expedition 119″ wheelbase from 2008-2017 with stock rear end weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
- This product is a special order from Australia, and that can easily take 4-6 months to get. Confirm below that you understand that the order can’t be cancelled once placed
$535.00 Select options -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum UCA’s | 200 Series Land Cruiser
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
$1,195.00 Add to cart -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Expedition 2008-2017 119in Wheelbase
Dobinsons C19-433 1.75″ Lift HD Rear Coils | Ford Expedition 2008-2017
- 1.75″ HD rear lift coils for a Ford Expedition 119″ wheelbase from 2008-2017 with 400LBS of constant rear end weight, like a bumper, tent, trailer, etc
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
- This product is a special order from Australia, and that can easily take 4-6 months to get. Confirm below that you understand that the order can’t be cancelled once placed
$535.00 Select options -
Full Suspension Kits - Tundra 3rd GenShips FREE !!
within 48 US StatesDobinsons 2-3″ IMS Suspension Kit | 2022+ Toyota Tundra
- Dobinsons IMS suspension kit for your 2022-2023+ Tundra
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Hybrid Models lift 1-1.5″ less lift than listed here
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Installation Note: Transfer over the rear OEM coil isolators from the stock coils to these to prevent coil slap
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- **Not compatible with factory rear airbag suspension
- Standard Coil seat height for IMS59-60446 should be set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
From $1,980.00 Select options -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart -
MRA Remote Resi 3-Way Adjustable MonotubeShips FREE !!
within 48 US StatesDobinsons MRA59-A701 3-Way Adjustable MRA Shocks
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 609mm extended, 389mm compressed
- SOLD IN PAIRS
- Now comes with a longer hose and different mounting instructions
$1,150.00 Add to cart -
Suspension
Dobinsons GS59-705 Rear Shocks | FJ Cruiser 4Runner GX470 GX460
- Suits Toyota 4Runner 2003-2024 and Toyota FJ Cruiser, Lexus Gx470 and GX460 models 2006 to 2023, with 0-2.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-705 Specifications: 590mm extended, 355mm compressed, 50mm body size
- Made in Yellow and Black
$310.00 Select options -
Recovery
Dobinsons 4×4 Off Road Rapid Tire Deflator with Gauge and Pouch
- 0-60 PSI Gauge Included at 1PSI Increments, giving easy and accurate readings
- Quick Release Coupling to Allow Pressure Checking at any time during Deflation
- Corrosion Resistant Brass Fittings for Long Life
- Includes Carry Case
- Combine with Dobinsons Air Compressor and Deluxe Tire Repair Kit for a Complete Tire Maintenance Package
$50.00 Add to cart -
Steering - Jeep JKShips FREE !!
within 48 US StatesRusty’s HD Tie Rod Assembly | JK Wrangler
- Fits: 2007-2018 Jeep Wrangler JK Models
- A tie rod makes the connection between both wheels at the knuckles, sets toe angle
- Massive 1.75″ x 0.250-wall DOM tubing Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- Machined hexed ends for easy adjustment
- Zinc Plated tie rod ends for protection and long life
- HD jam nuts
- Serrated Lock Washers
- The strongest JK Tie Rod you can buy
- Built in Rainbow City, Alabama, USA
- Also made in a aluminum version
$427.00 Add to cart -
Suspension
Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Interior mold is hex shaped
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart
Cart totals
Subtotal | $34,401.99 |
---|---|
Shipping |
Shipping to FL. |
Tax | $2,580.21 |
Total | $38,103.20 |