Your cart is currently empty!
Differential | Drivetrain
Showing 31–40 of 40 resultsSorted by popularity
-
SamuraiSuzuki Samurai Birfields – Longfield Samurai Front Axle Kit 33 Splines
- Suits 1986 to 1995 Suzuki Samurai
- Kit Includes: Birfields, Front axles, C-clips
- Made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers
- Birfield housing is made out of forged 4340 chromoly steel
- Internals of our Longfield™ birfields are made out of 4340 chromoly steel and then dual heat-treated for superior strength
- The axle shafts are also made out of 4340 chromoly steel
- 60% stronger than stock
- Requires upgrade of spider gears to 26 spline gears on differential end, either by getting a locker with 26 splines, or using OEM rear spider gears
- Installation Instructions
(9 reviews) -
SamuraiFREE SHIPPING
within 48 US StatesSuzuki Samurai 6.5:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 6.5 to 1. High Range reduction is 20% (1.7 to 1)
- Includes four new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Upgraded Trail-Safe seals included at no additional cost
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 chromoly alloy steel for its great strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Installation Instructions
- Special Seal Instructions
(9 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesTrail-Creeper 3:1 Sidekick / Tracker / Vitara Transfer Case Gears
- Suits 1991 to 1998 Suzuki Sidekick 4WD, 1991-2001 Geo Tracker 4WD, 1991-2001 Chevy Tracker 4WD, 1995-1997 Suzuki X-90 4WD, 1999-2001 Suzuki Vitara 4WD
- High Quality Materials
- Precision fitting spline fit for long life
- 72% gear reduction for more power and control on the trail
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- High Quality Materials
- Precision fitting spline fit for long life
- Includes Trail-Safe input and output seals
- Installation Instructions (and video down below)
(9 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesTrail-Creeper 4.24 Sidekick / Tracker / Vitara Transfer Case Gears
- Suits 1991 to 1998 Suzuki Sidekick 4WD, 1991-2001 Geo Tracker 4WD, 1991-2001 Chevy Tracker 4WD, 1995-1997 Suzuki X-90 4WD, 1999-2001 Suzuki Vitara 4WD
- High Quality Materials
- Precision fitting spline fit for long life
- 135% gear reduction for more power and control on the trail
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- High Quality Materials
- Precision fitting spline fit for long life
- Includes Trail-Safe input and output seals
- Installation Instructions (and video down below)
(9 reviews) -
Sale!Differential | DrivetrainFREE SHIPPING
within 48 US StatesPrice Increase Coming June 2ndARB RD151 Front Tundra Air Locker 5.7L V8 8″
- For Use with Toyota Tundra 5.7L V8 front 2007 to 2021 with 8″ 34 spline axles
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Sale!Bronco (2021-2025+)Price Increase Coming June 2nd
Ford Bronco Diff Cover by ARB | 2021+
- Suits 2021+ Ford Bronco 2-door and 4-door models with Dana 44 Rear Axle
- High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
- Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss
- Approach/departure angle optimized by angled exterior surface
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
- Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
- Low profile drain plug design resists damage from obstacles
- Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
- Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
- Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
- Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
- Made in Red or Black, choose below
(3 reviews) -
Sale!Differential | DrivetrainFREE SHIPPING
within 48 US StatesPrice Increase Coming June 2ndARB RD152 Rear Air Locker Toyota 9.5″ 32 Spline
- For Use only with Toyota 9.5″ 12 Bolt 32 spline Rear Axle
- Suits multiple vehicles, the full list is down below
- Will not suit 5.7L Tundra engines, as they use a larger rear differential (RD146)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(16 reviews) -
Sale!Differential | DrivetrainFREE SHIPPING
within 48 US StatesPrice Increase Coming June 2ndARB RD193 Rear Air Locker Toyota 8.15″ 12 Bolt
- For Use With Toyota 8.15″ 12 Bolt Shim Adjusted 30 Spline solid axle – used for many years in some rear applications
- Full vehicle fitment list is further down in the main description, includes 5th Gen 4Runner, Lexus GX460, FJ Cruiser – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Sale!Differential | DrivetrainFREE SHIPPING
within 48 US StatesPrice Increase Coming June 2ndARB RD153 Rear Air Locker Toyota 12 Bolt Semi Float
- For Use With Toyota 12 Bolt Semi Float 30 Spline solid axle – used for many years in some rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75 Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
Sale!Differential | DrivetrainFREE SHIPPING
within 48 US StatesPrice Increase Coming June 2ndARB RD142 Air Locker Toyota 12 Bolt Full Float
- For Use With Toyota 12 Bolt Full Float 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75 Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews)
