Your cart is currently empty!
Dobinsons
Showing 661–690 of 1061 resultsSorted by popularity
-
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-289B 1.75″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Black
- Dobinsons C59-289 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 1.75″ and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ70, RJ77, KZJ78 – 87-96 with stock rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold as a Pair
(0 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-288B 1.75″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Black
- Dobinsons C59-288 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96 1.75″ with bumper OR winch weight of 110lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold as a Pair
(0 reviews) -
DobinsonsDobinsons 4° Caster Plate Kit | Land Cruiser 71 76 78 79 Series
- Suits 9/1999+ Toyota Land Cruiser 70 Series, 71,76,78, 79 with 3-5″ of lift
- For 3″ to 5″ lift heights, realigns front caster angle
- Uses a combination of caster bushings and plates to rotate the axle to correct caster and prevent contact with tie rod and radius arms
- E-coated steel with all hardware supplied, super heavy duty
- Simple bolt-on design with some grinding required
- WA59-585K Caster Plate Kit Instructions
- If you have less than 3″ of lift, use PB59-503K instead
(0 reviews) -
Dobinsons
Dobinsons IMS and MRA Adjuster Rings (Pair) for 66mm body
- Pair of anodized adjuster rings
- Suits 66mm (2.6″) body sizes only
- For Toyota Tundra, Sequoia, Land Cruiser, etc
- Some vehicles use smaller 56mm rings for the smaller 2.2″ body size
- Available in black or purple
(0 reviews) -
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-083 Rear Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 2″ with up to 220LBS of constant added weight, or 2.5″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable 3″ Long Travel 4Runner MRA Suspension Kit | 2010-24
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024, without KDSS only
- Extended Travel front 3-Way Adjustable Remote Reservoir Struts and Long Travel Rear shocks along with all related components are listed on this page
- Maximize the suspension travel of your Toyota 4Runner for the most flex and travel you can get from bolt-on parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Lifting 3″ front and rear maintains factory rake
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Option to have the front struts preassembled prior to shipping to make installation easier at home
- You choose what options you want, nothing is provided if it is not listed once you have selected it
- Suspension Installation Video
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(5 reviews) -
LX600 (2022+)FREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | LX600 GX550 LC300 LC250 Tacoma
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2022+ Lexus LX600 and 2021+ Toyota Land Cruiser 300 Series (not sold in the USA) and 2024+ Toyota Tacoma, 250 Series Land Cruiser 2024+ and Lexus GX550
- Kit for both left and right hand side
- Includes press tools to remove and reuse the OEM ball joints from the OEM UCA’s
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers and OEM ball joints
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
(0 reviews) -
MRA Remote Resi 3-Way Adjustable Monotube
Dobinsons Replacement Rebound Adjuster Knob
- Single replacement rebound adjuster knob for front Dobinsons MRA struts
- Sold individually
- Works on the 3-Way Adjustable Remote Reservoir Monotube struts from Dobinsons (fronts only)
- Attaches to the top center stud after the coilover assembly has been installed into the vehicle (to prevent damage)
(7 reviews) -
Full Suspension Kits - Prado 90 95FREE SHIPPING
within 48 US StatesDobinsons Land Cruiser Prado 90 95 Suspension Kit
- Suits Toyota Land Cruiser Prado 90 and 95 SWB and LWB 4×4 Models
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Teal, Red or Black coils in the selections below
- Select what level of shocks you’d like base on usage, performance needs and price
- Note: This Prado 90 platform shares the same suspension design as the 3rd Gen Toyota 4Runner, so many descriptions will list the 3rd Gen 4Runner as that’s what these parts are most commonly sold for. However the weight of the Prado 90 is different, so the coil specs have been adjusted to suit the Prado 90.
(7 reviews) -
70/73 Series - HZJ70, HZJ73, PZJ70, PZJ73 (1990-1999)
Dobinsons 2.0″ Suspension Kit Toyota Land Cruiser 70 Series – HZJ70 HZJ73 PZJ70 PZJ73
- Full 2.0″ Suspension Kit Replacement for Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Select medium or heavy load leaf spring options
- Now with option to run new Dobinsons IMS shocks as an upgrade
(5 reviews) -
Grand Vitara (2005-2015)FREE SHIPPING
within 48 US StatesDobinsons Rear Shocks Pair for Suzuki Grand Vitara 2005-2015
- Suits Suzuki Grand Vitara 8/2005 to 2015 models – JT Series
- Sold in Pairs
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for long life and great vibration dampening
- 540mm extended, 353mm compressed
(9 reviews) -
Grand Vitara (2005-2015)FREE SHIPPING
within 48 US StatesDobinsons Front Struts Pair for Suzuki Grand Vitara 2005-2015
- Suits Suzuki Grand Vitara 8/2005 to 2015 models – JT Series
- Sold in Pairs
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- If also adding lifted coils, it’s recommended to buy the WA57-505K camber bolt kit to align the vehicle properly
- 620mm extended, 386mm compressed
(10 reviews) -
Sidekick/Tracker (1988-1998)
Dobinsons C57-013 Rear Coils | Suzuki Sidekick and Tracker SWB – Pair
- Dobinsons C57-013 Rear 30mm Lifted Coil Springs for the Suzuki Sidekick and Tracker SWB (Short Wheel Base) 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(16 reviews) -
Sidekick/Tracker (1988-1998)
Dobinsons C57-012 Front Coils | Suzuki Sidekick and Tracker – Pair
- Dobinsons C57-012 Front 40mm Lifted Coil Springs for the Suzuki Sidekick and Tracker 1.6L 8 Valve engine 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(16 reviews) -
Montero NM NP NS NT 2000+
Dobinsons C43-126 Front 1.75″ Lift Coil Springs for Montero 2000-06 (Heavy Load) – Pair
- 1.75-2.0″ lift with 110-220LBS constant weight on a Mitsubishi Montero 2000-06 USA model
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(18 reviews) -
Montero NM NP NS NT 2000+
Dobinsons C43-124 Front 1.75″ Lift Coil Springs for Montero 2000-06 – Pair
- 1.75″ lift with stock weight on a Mitsubishi Montero 2000-06 USA model
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(12 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | LC 200 250 300 Sequoia GX550
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 and 2022+ Land Cruiser 300 Series, 2024+ Land Cruiser 250 Series, Lexus GX550, and 2023+ Toyota Sequoia
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-013FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews) -
Suspension
Dobinsons 1″ Lift Greasable Shackle Kit Pair | Nissan D40 D41 Frontier Xterra 05+
- Suits Nissan Frontier D40 and D41 and Nissan Xterra (2005-2015)
- 2″ longer than stock that add approximately 1″ of lift
- Greasable design – requires greasable bushings to be greasable
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo is for illustration purposes
- Also available in regular length, without lift
(5 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons Land Cruiser 200 Series Snorkel Kit for 2008-2015
- 200 Series Snorkel Kit – Suits Toyota Land Cruiser 200 Series 2008-2015 Models
- Smooth body, no writing or logos on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(6 reviews) -
Frontier D40 (2005-2021)FREE SHIPPING
within 48 US StatesDobinsons 2.5″ Lift MRA Extended Travel Coilovers 3-Way Adjustable – Nissan Frontier 05-21
- Extended Travel Coilovers Suit Nissan Frontier D40 4×4 Models 2005-2021 – lifts 2.5″
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(3 reviews) -
Jimny (2018+)
Dobinsons Front Jimny Crossmember Drop Kit | Jimny 2018+
- Suits Suzuki Jimny 1998-2017 and 2018+
- Zinc plated for a long lasting finish
- Solid steel construction, includes all necessary longer bolts for simple installation
- See attached photo to show how it looks when installed
- Dobinsons transmission and transfer case cross member spacer kit
- Designed to correct the angle of the front driveshaft after lifting the vehicle
- Lifting the vehicle can cause driveline vibration issues, so reduce those, this kit is recommended.
(7 reviews) -
Full Suspension Kits - Bronco 2021+FREE SHIPPING
within 48 US StatesDobinsons IMS Ford Bronco Suspension Kit 4 DOOR
- Suits 4 DOOR Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- Complete suspension kit with multiple coil spring options to suit the vehicle as well as the added weight
- (The 2 Door Bronco Kit is on a different page)
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Front Springs Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models.
- Rear Springs Provide Approximately 3″ Lift Above Non Sasquatch Models & 2″ Lift Above Sasquatch Models.
- Dobinsons IMS shocks and struts are fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″) front and rear. See instructions on setting coil seat height on left
- Reuse OE strut top mounts
- Select the coil springs that match the Bronco version you have as well as the added weight you have put on it, if any
(7 reviews) -
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-565V – Pair
- Dobinsons C19-565V Variable Rate Springs Suits Ford Bronco:
- 2 Door – Base, Big Bend, Black Diamond, Outer Banks – 110-220Lb Load
- 2 Door – BL, Wildtrack, First Edition – 110-220Lb Load
- 4 Door – Base, Big Bend, Black Diamond, Outer Banks – 110-220Lb Load
- 4 Door – BL, Wildtrack, First Edition- 0-110lb Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50099
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(13 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bronco (2021-2025+)
Dobinsons Ford Bronco Front Coils | C19-564 – Pair
- Dobinsons C19-564 Suits Ford Bronco:
- 2 Door – Base, BL 2.3L, Black Diamond, Outer Banks – 2.7L – 110-200lb Load
- 2 Door – BL, Wildtrack, FE 2.7L – Stock Load
- 4 Door – Base, BB, Outer Banks – 110-200lb Load
- 4 Door – BS, BL 2.3L – Stock Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50098
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(18 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Shocks + Coilovers - Bronco 2021+FREE SHIPPING
within 48 US StatesDobinsons IMS Monotube 2.2″ IFP Rear Struts Pair | Ford Bronco 2021+
- IMS rear struts for Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″). See instructions on setting coil seat height on left
- Reuse OE strut top mount
(8 reviews) -
Shocks + Coilovers - Bronco 2021+FREE SHIPPING
within 48 US StatesDobinsons IMS Monotube 2.2″ IFP Front Struts Pair | Ford Bronco 2021+
- IMS front struts for Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″). See instructions on setting coil seat height on left
- Reuse OE strut top mount
(8 reviews)
