Dobinsons

Showing 211–240 of 1041 resultsSorted by popularity

Sale!
Replacement Bushings
On Sale All November!!
Dobinsons Upper Strut Bushing Kit – For -222 -221 -220 -574 -700
- Dobinsons replacement upper strut bushing kit with washers
- Suits a variety of Dobinsons struts, part numbers ending in -222 -221 -220 -574 -700
- Full list of part numbers this fits is below
- This is for 2 upper bushings and washers only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes
(0 reviews)
Original price was: $20.00.Current price is: $17.00. Add to cart
Sale!
100 Series Land Cruiser IFS (1998-2007)
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons MRA59-A786 MRA Extended Travel 3-Way Adjustable Front Shocks Pair | 100 Series (2-2.5″ Lift)
- Extended Travel Front Shocks for 100 Series and LX470 – these require a Diff Drop Kit and UCA’s to be installed for full articulation and to prevent axle binding
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Reservoir mounts to the empty holes forward of the shock on both sides
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
Rated 5.00 out of 5
(13 reviews)
Original price was: $1,350.00.Current price is: $1,147.50. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons IMS45-50648 Extended Travel IMS Struts Pair | Nissan Frontier Xterra R51 Pathfinder (2-3″)
- IMS front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Length specs – 278mm compressed and 410mm extended
- Standard coil seat height setting is 106mm, or set to 119mm for an extra 1″ of lift
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(16 reviews)
Original price was: $650.00.Current price is: $552.50. Add to cart
Sale!
40 Series Land Cruiser Early (1960-1979)
On Sale All November!!
Dobinsons PB59-1013K Polyurethane Leaf Spring Bush Kit for FJ/BJ40 FJ40/BJ45 25mm Eyes
- Suits 40/45 Series Land Cruisers with 25mm spring eyes front and rear
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
Rated 5.00 out of 5
(4 reviews)
Original price was: $85.00.Current price is: $72.25. Add to cart
Sale!
4Runner 3rd Gen (1996-2002)
On Sale All November!!
Dobinsons 3rd Gen 4Runner IMS 2-2.5″ Lift Kit for 1996 to 2002
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Select from Teal, Red, or Black coil springs in the options below
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(13 reviews)
Original price was: $1,770.00.Current price is: $1,504.50. Select options
Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Dobinsons C59-614V 4″ Flexi Front Coil Springs | Land Cruiser 80 series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- 4″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 570/580mm free height, 17mm wire, 180-275LBF/in variable rate
- Sold in Pairs
Rated 5.00 out of 5
(15 reviews)
Original price was: $405.00.Current price is: $344.25. Add to cart
Sale!
4Runner 3rd Gen (1996-2002)
On Sale All November!!
Dobinsons 2-2.5″ Lift Kit for Toyota 4Runner 1996-2002
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Teal, Red or Black coils in the selections below
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(13 reviews)
Original price was: $1,200.00.Current price is: $1,020.00. Select options
Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
Rated 5.00 out of 5
(13 reviews)
Original price was: $1,510.00.Current price is: $1,283.50. Select options
Sale!
Tundra 3rd Gen (2022-2024)
On Sale All November!!
Dobinsons C59-834 Front Springs | Toyota Tundra 2022+ Sequoia 2023+ – Pair
- Suits Toyota Tundra 2022+ and Sequoia 2023+
- Lifts the Tundra 2.0″ with stock weight (no accessories) and the Sequoia 3.0″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- These will NOT suit a TRD PRO strut
- Hybrid Models lift 1-1.5″ less lift than listed here
- TRD Pro models came with 1″ of lift, so subtract that if you’re changing out your Pro suspension for Dobinsons
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(13 reviews)
Original price was: $305.00.Current price is: $259.25.
Coil Color Clear

Dobinsons C59-834 Front Springs | Toyota Tundra 2022+ Sequoia 2023+ - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Replacement Bushings
On Sale All November!!
Dobinsons Lower Strut Bushing – For -222 -220 -221 -782 -470
- Dobinsons replacement lower strut bushing
- Suits a variety of Dobinsons struts/shocks, part numbers ending in -222 -220 -221 -782 -470
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
(0 reviews)
Original price was: $20.00.Current price is: $17.00. Add to cart
Sale!
Sequoia 2nd Gen (2008-2022)
On Sale All November!!
Dobinsons IMS Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8
- Fully rebuildable and re-valvable monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Dobinsons IMS rear shocks are longer than the twin tubes, 343mm compressed length, 489mm extended length
- Front IMS struts assembly instructions
Rated 5.00 out of 5
(8 reviews)
Original price was: $2,180.00.Current price is: $1,853.00. Select options
Sale!
Dobinsons
On Sale All November!!
Dobinsons IMS and MRA Adjuster Spanner Wrench
- Suits IMS or MRA front adjustable height coilovers
- For Toyota 4Runner, FJ Cruiser, and more
- For Lexus GX470 and GX460
- Made of steel, EDP coated
- A new set of IMS or MRA struts come with a wrench included
Rated 5.00 out of 5
(15 reviews)
Original price was: $25.00.Current price is: $21.25. Add to cart
Sale!
Tundra 3rd Gen (2022-2024)
On Sale All November!!
Dobinsons IMS59-60887 2.6″ IFP Rear Shocks Pair
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift – Stock/Light Load Valving
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 670mm extended, 410mm compressed
Rated 5.00 out of 5
(13 reviews)
Original price was: $650.00.Current price is: $552.50. Add to cart
Sale!
Tundra 3rd Gen (2022-2024)
On Sale All November!!
Dobinsons IMS 2.6″ Rear Shocks Pair | 2022+ Tundra – Med/Heavy Valving
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift – Medium/Heavy Load Valving
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 670mm extended, 410mm compressed
Rated 5.00 out of 5
(17 reviews)
Original price was: $650.00.Current price is: $552.50. Add to cart
Sale!
40 Series Land Cruiser Early (1960-1979)
On Sale All November!!
Dobinsons SK59-002 Greasable Shackle Kit Pair for Toyota 40/45 Series
- Suits Front or Rear FJ40/BJ40 up to 1979 with 25mm spring eyes, and Front FJ45/BJ45 with 25mm spring eyes up to 1979
- Recessed twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo for illustration purposes only
Rated 5.00 out of 5
(8 reviews)
Original price was: $110.00.Current price is: $93.50. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons Front 2.2″ IMS Shocks Pair for 60 70 71 73 74 75 77 Series Land Cruisers
- Front IMS shocks to suit 60 62 70 71 73 74 75 77 Series Landcruisers up to 1999 models with leaf spring front suspension
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 598mm extended, 389mm compressed
Rated 5.00 out of 5
(15 reviews)
Original price was: $580.00.Current price is: $493.00. Add to cart
Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Dobinsons 10mm Coil Spacer (Single) for Front of Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Lifts 10mm (0.4″)
Rated 5.00 out of 5
(8 reviews)
Original price was: $35.00.Current price is: $29.75. Add to cart
Sale!
200 Series Land Cruiser (2008-2021)
On Sale All November!!
Dobinsons 200 Series Land Cruiser 1.0-2.5″ IMS Lift Kit
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
Rated 5.00 out of 5
(12 reviews)
Original price was: $1,945.00.Current price is: $1,653.25. Select options
Sale!
60 62 Series Land Cruiser (1980-1989)
On Sale All November!!
Dobinsons HJ61-7L-F Front Leaf Springs Pair for 60 62 Series
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
- 45mm front lift with 110-220LBS of additional weight and gas engine
- Remove the 3rd leaf from the top to make these the HJ61-6L-F
Rated 5.00 out of 5
(5 reviews)
Original price was: $360.00.Current price is: $306.00. Add to cart
Sale!
Suspension
On Sale All November!!
Dobinsons C45-254 Front Lifted Coil Springs for Nissan Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 541LBF/in spring rate
- C45-254 – 1.6″ – Nissan Pathfinder R51 with up to 110LBS constant weight
- C45-254 – 1.6″ – Nissan Xterra (2005-2015) with 110-220LBS constant weight
- C45-254 – 2.5″ with stock weight, 2.0″ with 110-220 constant weight (bumper/winch)
- C45-254 – Nissan D41 Frontier 2022+ models, 3.0″ with stock weight, 2.5″ with 110lbs constant weight
Rated 5.00 out of 5
(15 reviews)
Original price was: $270.00.Current price is: $229.50.
Coil Color Clear

Dobinsons C45-254 Front Lifted Coil Springs for Nissan Trucks and SUV's - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Suspension
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons MRA59-A683 3-Way Adjustable MRA Front Shocks Pair | 80 Series 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 0-3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 627mm extended, 385mm compressed
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(17 reviews)
Original price was: $1,350.00.Current price is: $1,147.50. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons Tundra 2.25-3.0″ Suspension Kit for 2007-2021 Double Cab 4×4 V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to provide comfort and lift
- Multiple coil colors available
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- NEW IMS struts and shocks now available – Adjustable height front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- Front IMS assembly instructions
Rated 5.00 out of 5
(10 reviews)
Original price was: $1,890.00.Current price is: $1,606.50. Select options
Sale!
4Runner 5th Gen (2010-2024)
On Sale All November!!
Dobinsons Front 1.0″ Lift Coils for Toyota 4Runner TRD PRO – Pair
- Provides 1.0″ lift over stock height by changing only the coils. No other mods required, except an alignment afterwards
- Suits Bilstein and Fox TRD Pro Struts ONLY with flat-ground coils top and bottom
- Will NOT work on 2021 models with a step in the lower coil seat
- Same spring rate as stock, just taller to give the lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – RED
- Sold in Pairs
Rated 5.00 out of 5
(12 reviews)
Original price was: $275.00.Current price is: $233.75. Read more
Sale!
Suspension
On Sale All November!!
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
Rated 5.00 out of 5
(7 reviews)
Original price was: $165.00.Current price is: $140.25. Add to cart
Sale!
Tundra 3rd Gen (2022-2024)
On Sale All November!!
Dobinsons Rear Adjustable Panhard Rod for 22+ Tundra, 23+ Sequoia
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
Rated 5.00 out of 5
(11 reviews)
Original price was: $345.00.Current price is: $293.25. Add to cart
Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Dobinsons Land Cruiser 80 Series Shocks ALL Options – Front and Rear
- This page shows all Dobinsons shock options for the 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- See the description below for information about the difference between the 3 different shock types
- Select the shock type you’d like that will also suit the amount of lift or travel that you are looking for
- Keep in mind that using an extended travel shock can always require additional parts, such as extended brake lines, bump stops, suitable coils, trailing arms, drive shafts, etc
- All shocks are sold in PAIRS, steering dampers are individual
- Order what you would like, but only order 1 set of front shocks and 1 set of rear shocks
- Shocks front and rear need to match – IMS front and rear, or twin tube front and rear, for example
- All shocks come with new bushings and any required hardware for installation (MRA shocks come with resi brackets)
- Any length shocks for more than 3″ lift require adequate bump stop spacing to prevent shock bottom-outs
- The extended and compressed lengths of each shock are listed in millimeters (mm), (extended/compressed)
- To see full details of each product, select it from the drop-down menu, then click the small square box that appears to the right to be taken to that product page for full details and shock specs
(0 reviews)
From $135 Select options
Sale!
Dobinsons
On Sale All November!!
Dobinsons Tacoma Add-A-Leaf to L59-110-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-110-R to L59-111-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
Rated 5.00 out of 5
(6 reviews)
Original price was: $140.00.Current price is: $119.00. Add to cart
Sale!
Tundra 2nd Gen (2007-2021)
On Sale All November!!
Dobinsons L59-121-R Rear Leaf Springs Pair Tundra 2007-2021
- Suits Toyota Tundra 2WD and 4WD Rear ends from 2007 to 2021 – lifts 2.25″ with 400LBS constant rear end load (For campers, and heavy constant load rear ends)
- There are 7 leaves in this pack
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Enough for 1 Vehicle
- Photo for illustration purposes only
- Scroll down to add bushings and related parts (they don’t come with anything automatically)
Rated 5.00 out of 5
(8 reviews)
Original price was: $900.00.Current price is: $765.00. Add to cart
Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Dobinsons C59-269V Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-269v 1.75″ Comfort ride spring with only stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 480/490mm free height, 17mm wire, variable rate
- Sold in Pairs
Rated 5.00 out of 5
(18 reviews)
Original price was: $270.00.Current price is: $229.50. Add to cart
Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Dobinsons C59-171 Rear Coil Springs | Land Cruiser – Pair
- 80 Series and Lexus LX450 (1990-1997) – Dobinsons c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- 100 Series (1998-2007) – Dobinsons C59-171 – 1.5″ lift, linear rate, with 880LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 485/495mm free height, 328LBF/in rate
- Sold in Pairs
Rated 5.00 out of 5
(16 reviews)
Original price was: $405.00.Current price is: $344.25. Add to cart