Your cart is currently empty!
Exceptions
Showing 421–450 of 1089 resultsSorted by popularity
-
Full Suspension Kits - Frontier D41FREE SHIPPING
within 48 US States2022 Frontier Lift Kit Dobinsons 2-3″ 3-Way Adjustable MRA Kit | Frontier D41 2022+
- Complete Dobinsons MRA 3-Way Adjustable Suspension Kit for your 2022+ Nissan Frontier D41 Truck
- Choose what front and rear lift heights and load ratings you would like, as well as what parts you would like to include
- Nothing is included in the order if you don’t select it from below
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Photos show a full kit with many parts selected. If you don’t select a part from below, it is not included
(10 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesJeep Gladiator Overland Tailgate Table | 2019+
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Gladiator owner should do.
- Made in 4 different colors and 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
(6 reviews) -
Skid Plates
RCI Catalytic Guards | 2003-24 4Runner / FJ / GX
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2003-2024 4Runner, FJ Cruiser (all years), GX470 and GX460 (all years)
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
(2 reviews) -
Full Suspension Kits - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable Tundra 2.0″-3.0″ MRA Suspension Kit | 2007-2021
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Coils are teal. Struts and shocks are black
- Front MRA Coilovers are assembled at the standard coil seat height
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Brackets and Hardware and Sticker Pack
- Full 2 year limited warranty, no set rebuild time period, fully rebuildable shocks
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
(12 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front 3rd Gen 4Runner Big Brake Kit 1996-2002
1996-2002 3rd Gen 4Runner Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(6 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sale!Bronco (2021-2025+)
RCI Ford Bronco Aluminum Roof Rack | 4-door Hardtop 2021+
- Suits Ford Bronco 4-door Hardtop models 2021+ (will not fit soft top models or 2-doors)
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, spare tire, bike mounts, roof baskets, etc.
- Unique design allows removal of all three front roof panels with the rack in place
- Side panels feature removable filler panels for a superior finished look (simply take them off when you want to remove the roof, or leave them off if you prefer!)
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept 1/4″ nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Front fairing designed to accommodate up to a 42″ light bar
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes clamp system and OEM Ford mounting studs to secure to the truck
- Includes a filler piece for each side for a completed look that can be uninstalled in order to take off roof panels without removing the rack
- Rack is less than 4″ above highest point of the truck
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs 54lbs
- Made in the USA
- See the Video below to show how the roof panels come off with the rack installed
(5 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons Stock Height Sequoia Suspension Kit for 2001 to 2007 4.7L V8
- Complete suspension kit for replacing the original Sequoia wearable suspension parts
- Coils are specifically suited to bring the ride height back up to original stock height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- New high performance IMS Monotube front and rear shock options are available to choose from
- If your vehicle has factory airbags in the rear, you’ll need to add the airbag conversion kit to run the new coil springs, option is below
(13 reviews) -
Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesOverland Vehicle Systems Roof Top Tent & Awning Organizer
Tent Organizer Features:
- Color: Grey
- Pouches: 8
- C-Channel Mount: Yes, selected Overland Vehicle Systems Items
- Velcro Mount: Yes, universal and Mamba and Bushveld Roof Top Tents
- D-Ring Storage: Yes, 3
- Anchor Points: 2, Bottom Left and Right
- Body Material: 600D Rip Stop
(3 reviews) -
Full Suspension Kits - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesDobinsons 1-2.5″ 3-Way Adjustable MRA Coilovers for Toyota 4Runner 5th Gen 2010-2024
- Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- MRA59-A700 Travel – 560mm extended, 420mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(4 reviews) -
GX470 (2002-2009)FREE SHIPPING
within 48 US StatesDobinsons 1-3.5″ 3-Way Adjustable MRA GX470 Coilovers
- Suits Lexus GX470 – all years 2003-2009
- Looking for a quick and easy way to lift your GX470? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(3 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Tundra IMS 2.25″-3.0″ Quick Ride Kit or AAL for 2007-2021 4×4 V8
- Suits 2007-2021 Toyota Tundra 4×4 V8 Dual Cabs
- Complete Quick Ride or AAL suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- In the back, you can either lift your truck with the Dobinsons Quick Ride (block and U-bolt) Kit or the Wheeler’s Add-a-leaf Kit
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Affordable suspension system without requiring new rear leaf packs
- Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 80 Series Stock Height Restoration IMS Suspension Kit 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils are specifically suited to match OE spec and height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA Front Shocks Pair | Wrangler JL + Gladiator JT (2-4″ lift)
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
- 677mm extended, 425mm compressed
(15 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA Rear Shocks Pair | Jeep Wrangler JL (2-4″ lift)
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
- 732mm extended, 460mm compressed
(17 reviews) -
Front BumpersFREE SHIPPING
within 48 US StatesAll Pro 2014-2024 4Runner LoPro Bumper
- Suits 2014-2024 5th Gen Toyota 4Runners, but not Limited Models
- BUILT 100% IN THE USA!!
- 3/16″ steel faceplate and 1/4″ steel winch plate
- 4 1/2″ x 10″ winch mounting pattern
- Compatible with most 8-12k winches with remote mount solenoid box
- Zinc plated hardware
- Finished in a durable black powder coat
- Designed to fit 30″ single-row light bars
- Compatible with Toyota Safety Sense (TSS) and Multi-Terrain Monitoring system (MTM)
- Cutting the plastic bumper is required to install this product
- Weighs 74lbs
- NOTE: Not compatible with Limited Edition 4Runners
- Optional side wing supports
- Download Instructions
- **We are not able to ship this outside the 48 US States
(3 reviews) -
Sale!Roof RacksFREE SHIPPING
within 48 US StatesOVS Cab Height Mid Size Short Bed Truck Discovery Rack
- For Short Bed Trucks Up To 5.5FT in Length with Tie Down Bed Rails
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier D21 & D40, Ford Ranger, Chevy Colorado, GMC Canyon, etc
- Heavy Duty 2” Square Top Rails are Adjustable
- No Holes to Drill Installation
- Multiple Tie Down Points
- Full Length Rails with Integrated Tie Downs
- Removable Shelf to Store Items like Propane Bottle, CO2 Tanks, Air Compressors, etc.
- Side Mounting Plates with Integrated Mole Mounting Holes to Mount Gas Cans, Water Cans, Jacks, Recovery Ramps, etc.
- Easily Mount Roof Top Tents and Awnings
- Crossbar Length 51.25”
- Accessory Plate Length 41”
- Overall Length 57”
- Overall Height 33”
- Marine Grade Stainless Steel Hardware
- 2 Stage Black Powder Coat
- T-Slot Bars are 4 Sided
- Heavy Duty Welded Corners
- Dynamic Weight Capacity: 450lbs
- Static Weight Capacity: 1350lbs
- Brand: Overland Vehicle Systems
- Limited Lifetime structural warranty and five-year finish warranty
- Installation Instructions
(8 reviews) -
Skid Plates
RCI Lexus GX470 & GX460 V8 Transmission Skid Plate
- Fits USA spec Lexus GX470 and Lexus GX460 V8 Models 2003-2023
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOVS Combo Pack Soft Shackle 5/8″ 44,500 lb. and Recovery Ring 6.25″ 45,000 lb. Black
- Soft Shackle 5/8 inch 44,500 lb
- With Loop and Abrassive Sleeve
- 23 inch
- With Storage Bag and Recovery Ring 6.5 inch 45,000 lb
- Black With Storage Bag Universal are the ultimate must have for your Overland or Offroad Rig.
(8 reviews) -
Sale!Camping EquipmentFREE SHIPPING
within 48 US StatesOVS Komodo Camp Kitchen – Dual Grill + Skillet + Folding Shelves + Rocket Tower – Stainless Steel
- The OVS Komodo Camp Kitchen is a Lightweight, Compact and Portable Camp Kitchen
- Dual Grills/Burners
- Large Cooking Skillet
- Rocket Tower (Use Wood or Briquettes to cook your food!!)
- 2 Folding Shelves
- Expandable Legs
- Storage for Cooking Utensils
- Handles
- 4 Pull Latches
- Made from Durable Aluminum and Stainless Steel
- Weight – 51 LBS
- Dimension Closed: 23.5 x 14.5 x 13″
- Dimension Open: 86 x 39.5 x 24″
- Leg Length: 10″
- Skillet Dimension: 18 x 10.5″
- Grill Station Dimension: 21 x 10.5″
- Rocket Tower Dimension: 4 x 4 x 13″
- Top Storage Dimension: 20.5 x 10.5″
(6 reviews) -
AwningsFREE SHIPPING
within 48 US StatesOVS Nomadic 270° LT Awning & Wall 1 + 2 + Mounting Brackets – Passenger Side
- 270 Degree Awning With 5 Built-In Aluminum Rafters
- Awning Wall 1 and 2 are included
- Awning is also available separately without any walls
- 2 Pivoting & Telescoping Aluminum Poles + 2 Telescoping Aluminum Poles
- 6 Sets of Shock Cord
- 8 Heavy Duty Stakes
- Travel Cover
- 2 Heavy Duty Mounting Brackets and Hardware
- Nylon Reinforced Tie Down Kit
(8 reviews) -
Sale!AwningsFREE SHIPPING
within 48 US StatesOVS Nomadic 270° Awning – Dark Gray Cover With Black Transit Cover & Brackets – Passenger Side
Features:
- Passenger Side Application
- 129 Square Feet of Freestanding Covered Shelter
- 600D Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover
- 10 Lb Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
What’s included:
- 270 Degree Awning With 6 Built-In Aluminum Rafters
- 3 Pivoting and Telescoping Aluminum Poles + 3 Telescoping Aluminum Poles
- 6 Sets of Shock Cord
- 6 Heavy Duty Stakes
- Travel Cover
- 3 Heavy Duty Mounting Brackets and Hardware
- Nylon Reinforced Tie Down Kit
(8 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOVS Snatch Block – Standard 16,000 LBS
- Black Gloss Finish
- 16,000LB working load limit
- 30,000LB breaking strength
- Crafted with heavy duty iron
- Designed to be used with synthetic or steel winch lines
(3 reviews) -
Tire and WheelFREE SHIPPING
within 48 US StatesUDA Digital Tire Gauge with Valve Kit & Storage Bag
- Mechanic recommended, performance tested, & certified precise pressure readings up to 200 psi
- Display resolution to 0.10 psi increments.
- Built from super strong brass & steel parts shielded by our rugged shock-resistant gear-style protective guard.
- Flexible 10” no-leak rubber air hose with super handy 360-degree interchangeable advanced angled chuck for easy access to the tire valve.
- All readings lock-on to the display until the “on” button on the gauge is pressed to reset to 0 psi.
- Integrated air bleeder valve to reduce pressure in overinflated tire.
- Large 2” LCD display screen with battery life indicator.
(3 reviews) -
Sale!RecoveryFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Digital Tire Deflator with Valve Kit & Storage Bag
- Oversized Digital Gauge
- Heavy Duty Rubber Protective Cover
- Illuminated Display
- Anti Rust Brass and Stainless Steel Components
- Reinforced Nylon Wrapped Air line
- 3 Inch Circle Dial
- 17 Inch Hose
- Removes The Valve Core For Fastest Deflation
- Instantly Read The PSI
(3 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Recovery Ring 2.5″ 10000 lb. Red With Storage Bag
• Only use with synthetic winch lines.
• Weight Capacity 155KN (35,000lbs)
• 6061 aluminum alloy, with a T6 temper
• 50% stronger than traditional snatch blocks
• Comes with storage bag with quick cinch
• Limited lifetime warranty
(10 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Recovery Shackle 3/4″ 4.75 Ton Red – Sold In Pairs
- Overland Vehicle Systems D Ring Shackles 3/4″” (2 Pack)
- 57,000 lbs. Break Strength with 7/8” Pin
- Heavy Duty D Ring Shackle For Recovery Off Road
- For Tow Strap, Bumper, Winch, Snatch Block & Towing Jeep Truck SUV RV
(3 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Recovery Shackle 3/4″ 4.75 Ton Black – Sold In Pairs
- Overland Vehicle Systems D Ring Shackles 3/4″” (2 Pack)
- 57,000 lbs. Break Strength with 7/8” Pin
- Heavy Duty D Ring Shackle For Recovery Off Road
- For Tow Strap, Bumper, Winch, Snatch Block & Towing Jeep Truck SUV RV
(3 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS59-60634 2.6″ IFP Front Shocks Pair LJ70 LJ72 LJ73 LJ77 LJ78 LJ79 KZJ78
- Front IMS shocks for Toyota Land Cruiser LJ70 LJ72 LJ73 LJ77 LJ78 LJ79 KZJ78 – 1987 to 1996 (import Prado’s with rectangle headlights)
- Longer travel than regular replacement rear shocks
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 510mm extended, 336mm compressed
(17 reviews)
