Your cart is currently empty!
Exceptions
Showing 31–60 of 530 results
-
Tire and WheelShips FREE !!
within 48 US StatesDigital Tire Deflator + Digital Tire Gauge + and 53pc Tire Repair Kit Combo Kit
- Our Recovery Gear and Air management Systems are some of the best in the business! Now you get the best of both worlds with our Combo Kits!
- Tire Repair Kit
- Digital Tire Gauge
- Digital Tire Deflator
$99.99 Add to cart -
TimbrenShips FREE !!
within 48 US StatesTimbren ABSTRFK Tacoma U-Bolt flip and Active Bump Stops Kit | 2005-2023 Tacoma
- Suits 2005 to 2023 Toyota Tacoma 4×4 models
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Includes incorporated u-bolt flip kit for additional clearance below
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
$398.07 Add to cart -
Firestone
Firestone 4135 Coil-Rite Rear Helper Airbags for 0-1.5″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 for 0-1.5″ of lift
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
$144.12 Add to cart -
SPCShips FREE !!
within 48 US StatesSPC 25470 | UCA’s for Tacoma 2005-2023
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with updated maintenance-free sealed ball joints
- Installation Instructions
$695.95 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60713 IFP Rear Shocks for Toyota Sequoia 2008-2022
- Suits 2008-2022 Toyota Sequoia without rear air suspension, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 343mm compressed length, 489mm extended length (these are extended travel over the GS59-713 shocks)
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
$650.00 Add to cart -
80 Series Land Cruiser (1990-1997)Ships FREE !!
within 48 US StatesTimbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
$269.36 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Complete CV Boot Kit | Long Travel for 2005-23 Tacoma
- Complete CV boot replacement kit – Suits 2005-2023 Toyota Tacoma
- Includes inner OEM-Style CV boots and outer LONG TRAVEL CV boots and all related clamps
- Does not require long travel suspension to run this kit
- Qty 2 – OEM-Style Neoprene Long Travel Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
$160.00 Add to cart -
FirestoneShips FREE !!
within 48 US StatesToyota Tundra Firestone Airbag & Daystar Cradle Bundle 2007-21 Tundra
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions: Installation Instructions
- Firestone Airbag Kits do not have a warranty when used with Daystar Airbag Cradle Kit
- Enjoy full suspension travel and the benefits of air bags with the Daystar Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough Daystar polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Your Daystar Air Bag Cradle Kit is backed by a Lifetime Warranty
- Daystar cradle mounts to top of leaf spring, airbag mounts to frame above only
$629.00 Add to cart -
80 Series Land Cruiser (1990-1997)Ships FREE !!
within 48 US StatesDobinsons SS59A824 Adjustable Monotube Steering Damper | Land Cruiser
- 56mm Extruded and CNC machined 6061-T6 hard anodized aluminum body
- Hard-anodized and clear coated for a durable finish.
- External reservoir design separates oil and high-pressure nitrogen gas
- Black-anodized, CNC machined 6061-T6 billet aluminum Components
- 5/8” hard chrome plated heat treated alloy steel Shaft
- 50mm high-flow 6061-T6 CNC machined Piston
- Natural rubber OEM style bushings
- Direct replacement for stock and after-market lifts kits
- 12 stage adjustment range
- Installation Instructions
$545.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA45-A912 3-Way Adjustable MRA Front Shocks | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 4″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 667mm extended, 401mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A687 3-Way Adjustable MRA Rear Shocks | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 4-5″ of lift, or when used in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS Front Struts for Tundra 2022+ and Sequoia 2023+
- Front IMS struts to suit Toyota Tundra 2022-2023 and Sequoia 2023+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Coil seat for IMS59-60446 should be set at 175mm (6.87″) from the strut bushing eye
$720.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS59-50941 Long Travel Rear IMS Shocks for 2005-23 Tacoma
- Longer travel rear shocks for maximum down travel with a bolt-on shock
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Specifications 16.5″ compressed length, 26.9″ extended length
- These shocks require extended brake lines and extended bump stops
- Full 2 year limited warranty, no set rebuild time period
$580.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60711 IFP Rear Shocks for Toyota Tundra 2007-2021
- Suits 2008-2021 Toyota Tundra, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 642mm extended, 401mm compressed lengths
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
$650.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS59-50649 Monotube IFP Rear Shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
$580.00 Add to cart -
SPCShips FREE !!
within 48 US StatesSPC 25490 | UCA’s for 2008-22 Sequoia & 2007-21 Tundra
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
$749.95 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60782 Front IMS Shocks | Land Cruiser 100 Series (0-2″ lift)
- Front shocks only. To order full kit, click here
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart -
4Runner 3rd Gen (1996-2002)Ships FREE !!
within 48 US StatesDobinsons IMS59-50225 Rear IMS Shocks for Toyota 4Runner 1990-02
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 530mm extended, 344mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
$580.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60688 IFP Front Struts | Land Cruiser 200 Series
- Front struts only (no coils). For a full suspension, click here
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 606mm extended, 438mm compressed
- SOLD IN PAIRS
$720.00 Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS45-50648 Extended Travel IMS Struts | Nissan Frontier Xterra R51 Pathfinder (2-3″)
- IMS front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Length specs – 278mm compressed and 410mm extended
- Standard coil seat height setting is 106mm, or set to 119mm for an extra 1″ of lift
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Complete CV Boot Kit | Toyota Tundra Sequoia 2000-2006
- Complete CV boot replacement kit – Suits 2000-2006 Toyota Tundra and Sequoia
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
$120.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Complete CV Boot Kit | 03-09 4Runner FJ Cruiser GX470
- Complete CV boot replacement kit – Suits 2003-2009 4Runner, 2006-2009 FJ Cruiser, 2003-2009 Lexus GX470
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
$155.00 Add to cart -
100 Series Land Cruiser IFS (1998-2007)Ships FREE !!
within 48 US StatesDobinsons MRA59-A786 MRA Extended Travel Adj Front Shocks | 100 Series (2-2.5″ Lift)
- Extended Travel Front Shocks for 100 Series and LX470 – these require a Diff Drop Kit and UCA’s to be installed for full articulation and to prevent axle binding
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Reservoir mounts to the empty holes forward of the shock on both sides
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
$1,350.00 Add to cart -
TimbrenShips FREE !!
within 48 US StatesTimbren ABSOSR Active Off Road Rear Bump Stops | Frontier Tacoma Tundra
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 2005-2023 Tacoma (using standard u-bolts), 2000-2021 Toyota Tundra, 2005-2023 Nissan Frontier
- Click here for instructions
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90P00 (1/2″ spacer)
- A25723-90AH00 (1″ spacer)
$269.36 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons 3-Way Adjustable MRA Front Struts Toyota Land Cruiser 200 Series
- Suits 2008-2021 Toyota Land Cruiser 200 Series
- Adjuster rings on strut body are black, not purple
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Reservoir mounting installation
- Must mount the banjo fitting and hose inwards to engine on MRA struts
$1,410.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A683 3-Way Adjustable MRA Front Shocks | 80 Series 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 0-3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 627mm extended, 385mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
Tundra 3rd Gen (2022-2024)Ships FREE !!
within 48 US StatesDobinsons IMS Rear Shocks for 22+ Tundra – Med/Heavy Valving
- Suits 2022+ Toyota Tundra Rear with 2-2.5″ of Lift – Medium/Heavy Load Valving
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 670mm extended, 410mm compressed
$650.00 Add to cart