Your cart is currently empty!
Exceptions
Showing 991–1020 of 1089 resultsSorted by popularity
-
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front Jeep Wrangler Big Brake Kit Stage 1 – 2019+ Sahara/Rubicon
2019+ Jeep Wrangler Sahara and Rubicon Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- SUITS SAHARA AND RUBICON MODELS – there’s a different kit for sport models
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES AT LEAST 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Wheel clearance is tricky on Jeeps, as there are so many sizes and offsets. For this reason, use THIS TEMPLATE to make sure you have the proper caliper clearance from the wheel
(8 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front Jeep Gladiator Big Brake Kit Stage 1
Jeep Gladiator Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES AT LEAST 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Wheel clearance is tricky on Jeeps, as there are so many sizes and offsets. For this reason, use THIS TEMPLATE to make sure you have the proper caliper clearance from the wheel
(7 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front Ford Ranger Big Brake Kit Stage 1 2019+
TECHNICAL BULLETIN Please be advised that the brake kit is not compatible with the e-booster system fitted to 2.7L Bronco and Ranger models and should not be fitted to vehicles that have an e-booster. This brake kit is only suitable for use on the Ranger and 2.3L Bronco equipped with vacuum boosters
2019+ USA Spec Ford Ranger Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits the 2.3L Turbo Engine
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(8 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front FJ Cruiser Big Brake Kit Stage 1
Toyota FJ Cruiser Big Brake Kit (all years) Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Manufactured, finished and packaged 100% in South Africa
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also for 06-09 Models and 10-16 Models
(3 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
SPCFREE SHIPPING
within 48 US StatesTax Return Sale, 10% off
Use Coupon TAXTIMESPC 25690 | Ford Bronco UCA Set 2021-2024+
- Suits Ford Bronco 2021-2024+
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- Arm will get you -2.0° to +2.00° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
(13 reviews) -
Bronco (2021-2025+)
RCI Rear Bronco Diff Skid Plate | 2021+ Ford Bronco
- Suits 2021+ Ford Bronco
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- MADE IN THE USA
(5 reviews) -
Bronco (2021-2025+)
RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door
- Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
- Includes engine (two piece), transmission and transfer-case skid plates.
- Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
- Compatible with 4×4 and Raptor models
- Simple installation and removal of all subsections for maintenance
- Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
- Smooth, flat surface that easily slides over obstacles
- Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
- Made in the USA
(9 reviews) -
76 Series - FZJ76, HZJ76, VDJ76 - 2007+ (Station Wagon)FREE SHIPPING
within 48 US StatesDobinsons Toyota 76 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 Series Land Cruiser Wagons, FZJ76, HZJ76, VDJ76 2007 to 2022
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(13 reviews) -
79 Series - FZJ79, HZJ79, HDJ79, VDJ79, GRJ79 (Pickup)FREE SHIPPING
within 48 US StatesDobinsons Toyota 79 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 79 Series Land Cruiser Pickup Trucks, FZJ79, HZJ79, HDJ79, VDJ79,
GRJ79 2007-2022 - Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes Left side single or dual Jerry Can carrier and right side Tire Carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(14 reviews) -
Sale!200 Series Land Cruiser (2008-2021)
Dobinsons Full Length Roof Rack for Land Cruiser 200 Series 2008-2021
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008 to 2021
- Includes 200 Series specific mounting rails for installation
- Photo shows gutter mounts still attached to the rack, but they are not used on the 200 Series
- Will cover roof rack, but it will still open
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes vehicle-specific fitting kit to secure the rack to your roof
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
(8 reviews) -
Full Suspension Kits - FJC LateFREE SHIPPING
within 48 US StatesDobinsons 2.5-3.5″ Extended Travel 3-Way Adjustable MRA FJ Cruiser Coilovers for 2010-2014
- Suits Toyota FJ Cruiser 2010-2014
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- MRA59-A574 – 575mm extended, 420mm compressed
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(3 reviews) -
Full Suspension Kits - GX460FREE SHIPPING
within 48 US StatesDobinsons 1-2.5″ 3-Way Adjustable MRA Coilovers for Lexus GX460
- Suits 2010-2023 Lexus GX460
- Looking for a quick and easy way to lift your GX460? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- MRA59-A700 Travel – 560mm extended, 420mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(6 reviews) -
Full Suspension Kits - XterraFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA Xterra Lift Kit | Xterra 2005-2015 (1.6″-2.5″)
- Complete Dobinsons MRA Suspension Kit for your Nissan Xterra 4×4 (2005-2015)
- Choose what front and rear lift heights and load ratings you would like
- Extended travel front struts MUST be run with aftermarket UCA’s for proper clearance at full droop
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
(10 reviews) -
Ranger 2019+ (US Spec)FREE SHIPPING
within 48 US StatesDobinsons IMS Monotube 2.2″ IFP Rear Shocks Pair | Ford Ranger USA Model 2019-2023
- For Ford Ranger 2019-2023 USA spec, for 0-2.5″ of rear lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 638mm extended, 415mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Ranger 2019+ (US Spec)FREE SHIPPING
within 48 US StatesDobinsons IMS Monotube 2.2″ IFP Front Struts Pair | Ford Ranger USA Model 2019-2023
- IMS front struts for 0-3.0″ of lift for Ford Ranger 2019-2023 Models (USA Spec only)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Ranger IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 495mm extended, 350mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 186mm. See instructions on setting coil seat height on left
- Reuse OE strut top mount
- Can reuse OE coils and add lift via preload or add Dobinsons 1.75″ Light Load or 1.75″ Heavy Load Front Coils
- NOTE: Dobinsons Front Sway Bar Link Kit must be purchased to run Dobinsons IMS struts
(8 reviews) -
Fridge/FreezersFREE SHIPPING
within 48 US StatesARB Classic Series II 50 Qt. Fridge Freezer (Grey/Black) – 10801472
- Capacity: 50 Quart (72 x 12 oz cans)
- External Dimensions: 20in(H) x 15in(W) x 27.8in(D)
- Internal Dimensions: Fruit & Dairy Compartment: 8.1in (H) x 11.2in(W) x 6in(D). Main Compartment: 15.5in(H) x 11.2in(W) x 13.3in(D)
- Weight: 53lbs
- Cooling Capacity: 50°F to 0°F
- Power: Built-in 12/24V DC and 100-240V AC power. Integrated battery protection system
- Current Draw: 0.87 amps/hour*. *Average power consumption tested at 37.4°F cabinet temperature, 78.8°F-87.8°F ambient temperature range, test duration of 66 hours and supply voltage of 12V DC
- Transmitting module: Bluetooth connectivity allows 2-way communication on SII fridges and 1-way display on SI fridges
- Warranty: Three year warranty from date of purchase
- Gun-metal grey with black highlights
- Removable lid with integrated seal
- Backlit, dimmable LED control panel with temperature display
- Bluetooth transmitter allows full-control and monitoring with free iOS and Android apps
- Receive an alert when someone leaves the lid open
- Rear-facing internal cabinet LED light with magnetic switch
- Durable, Secop compressor with smart electronic control system
- Tough powder coated steel outer casing
- Separate compartment for fruit and dairy products
- Durable detent hinge
- Integrated 3-stage battery protection system
- Rubber feet
- Strong, recessed steel carry handles
- Reversible basket with divider
- Convenient drain plug for simple cleaning
- Integrated evaporator
(7 reviews) -
Fridge/FreezersFREE SHIPPING
within 48 US StatesARB Fridge Freezer Classic Series II 37 Qt (Grey/Black) – 10801352
- Capacity: 37 Quart (50 x 12oz cans)
- External Dimensions: 16.9in(H) x 15in(W) x 27.8in(D)
- Internal Dimensions: Fruit & Dairy Compartment: 5in(H) x 11.2in(W) x 6in(D). Main Compartment: 12.6in(H) x11.2in(W) x 13.3in(D)
- Weight: 45.6lbs
- Cooling Capacity: 50°F to 0°F
- Power: Built-in 12/24V DC and 100-240V AC power. Integrated battery protection system
- Current Draw: 0.85 amps/hour*. *Average power consumption tested at 37.4°F cabinet temperature, 78.8°F-87.8°F ambient temperature range, test duration of 66 hours and supply voltage of 12V DC
- Transmitting module: Bluetooth connectivity allows 2-way communication on SII fridges and 1-way display on SI fridges
- Warranty: Three year warranty from date of purchase
- Gun-metal grey with black highlights
- Removable lid with integrated seal
- Backlit, dimmable LED control panel with temperature display
- Bluetooth transmitter allows full-control and monitoring with free iOS and Android apps
- Receive an alert when someone leaves the lid open
- Rear-facing internal cabinet LED light with magnetic switch
- Durable, Secop compressor with smart electronic control system
- Tough powder coated steel outer casing
- Separate compartment for fruit and dairy products
- Durable detent hinge
- Integrated 3-stage battery protection system
- Rubber feet
- Strong, recessed steel carry handles
- Reversible basket with divider
- Convenient drain plug for simple cleaning
- Integrated evaporator
(6 reviews) -
Bronco (2021-2025+)FREE SHIPPING
within 48 US StatesARB 5480100 Skid Plate Kit | Ford Bronco 4-Door 2021+
- Ford Bronco Skid Plate Set, Suits Ford Bronco 2021+ 4-Door Models
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(6 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 6″ Lift 3-Way Adjustable MRA Kit | Land Cruiser 80 Series 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- Kit requires additional parts for this lift height, see below
- **Kit photo shows additional options purchased**
- Coils are specifically suited to match lift height and added weight
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Installation Instructions of the MRA Shocks
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
- All options are listed below. For a complete kit, one item from each drop down menu should be selected for a complete kit
(12 reviews) -
Gladiator JT (2020-2025+)FREE SHIPPING
within 48 US StatesDobinsons 3″ IMS Suspension Kit for Jeep Gladiator JT
- For 2020+ Jeep Gladiator JT
- Lifts 3″ over stock height
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Monotube Shocks, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
(9 reviews) -
JL Wrangler (2018-2025+)FREE SHIPPING
within 48 US StatesDobinsons 3″ 3-Way Adjustable MRA Suspension Kit | Jeep Wrangler JL 4-Door
- For 2018+ Jeep Wrangler JL 4 Door Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Monotube Shocks, 2 Rear MRA Monotube Shocks, and 4 Coil Springs – Select your preferences
- New front and rear track bars are recommended (not offered from Dobinsons)
(11 reviews) -
JL Wrangler (2018-2025+)FREE SHIPPING
within 48 US StatesDobinsons 3″ 3-Way Adjustable MRA Suspension Kit | Jeep Wrangler JL 2-Door
- For 2018+ Jeep Wrangler JL 2 Door Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Monotube Shocks, 2 Rear MRA Monotube Shocks, and 4 Coil Springs – Select your preferences
- New front and rear track bars are recommended (not offered from Dobinsons)
(7 reviews) -
JL Wrangler (2018-2025+)FREE SHIPPING
within 48 US StatesDobinsons 3″ IMS Suspension Kit for Jeep Wrangler JL 2-Door
- For 2018+ Jeep Wrangler JL 2 Door Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Monotube Shocks, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
- New front and rear track bars are recommended (not offered from Dobinsons)
(10 reviews) -
JL Wrangler (2018-2025+)FREE SHIPPING
within 48 US StatesDobinsons 3″ IMS Suspension Kit for Jeep Wrangler JL 4-Door
- For 2018+ Jeep Wrangler JL 4 Door Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Monotube Shocks, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
- New front and rear track bars are recommended (not offered from Dobinsons)
(7 reviews) -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US States3/4″ Lift Shackles Pair for Toyota Tundra 2007-2021
- Easily adds 3/4″ of lift to your 2007-2021 Toyota Tundra
- 3/8″ Thick ASTM A36 Steel
- Shackle plates are powder coated black
- Class 10.9 zinc-plated hardware
- Bolts on the same way the factory shackle comes off
- Made in the USA
(10 reviews) -
AccessoriesFREE SHIPPING
within 48 US States4 Tire Inflation System – Universal With Box Fittings Hoses & Storage Bag – Black
- Air It Up 4 Tire Inflation System can deflate, and automatically inflate or equalize 4 tires at the same time.
- Includes ADS Controller Box, 90 psi Pressure Regulator, 150 psi Blow-off Valve.
- ADS Controller features 2 inlet valves with permanent or portable air source.
- Includes Pre-cut Hoses, Push To Connect Fittings, and everything that is needed for easy installation.
- Includes 8 Quick Connect Chucks with the easy to use Betty Bar feature and 4 Green Tire Connect Whips with a Storage Bag
- Heavy Duty Construction with DOT approved hoses and fittings.
- Designed to work with the EGOI 2 Air Compressor, ARB and Viair Compressors
- Complete line of Air Compressor Bracket Kits Available for Under Engine, Under Seat, and Rear Cargo Area Mounting Solutions.
- 5-Year Limited Month Warranty
(3 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesCompressor Mount & Connection Kit – JK & JL Cargo Area for ARB Dual Air Compressor – Black
- Jeep® JK & JL ARB® CKMTA12 Cargo Mount Install Bracket Kit
- Mounts to your Jeep’s Cargo Bed, no drilling needed
- INCLUDES •Heavy Duty Mounting Bracket & hardware
- Powder Coated Black
- 90” OEM Style Wiring Harness Plug In Extension
- 2 x 90° ⅜” Swivel Push-to-Connect Fitting
- 2 x 44” Hi Temp/Hi Pressure Air Line Hose
(3 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesCompressor Mount & Connection Kit – JL JT Under Pass. Seat for ARB Dual Air Compressor
- Jeep® JL and JT 4 Door ARB® CKMTA12 Under the Seat Install Bracket Kit
- Mounts to the floor bolts underneath the front passenger seat, no holes to drill.
- Includes Heavy Duty Mounting Bracket & hardware
- Powder Coated Black
- 120” Hi Temp/Hi Pressure Air Line Hose
- 2 x 90° ⅜” Swivel Push-to-Connect Fitting
(3 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesCompressor Mount & Connection Kit – JK Under Seat for ARB Dual Air Compressor – Black
- Suits all Jeep JK Models 2007-2018
- Jeep® JK 4 Door ARB® CKMTA12 Under the Seat Install Bracket Kit.
- Mounts underneath the front passenger seat, no holes to drill.
- INCLUDES •Heavy Duty Mounting Bracket & hardware •
- Powder Coated Black
- 96” Hi Temp/Hi Pressure Air Line Hose
- 2 x 90° ⅜” Swivel Push-to-Connect Fitting
(3 reviews) -
AccessoriesFREE SHIPPING
within 48 US States4 Tire Inflation System – Jeep JK Engine Mount
• Suits all Jeep Wrangler JK from 2007 to 2018
• Air It Up® 4 Tire Inflation System can deflate, and automatically inflate or equalize 4 tires at the same time.
• Includes ADS Controller Box, 90 psi Pressure Regulator, 150 psi Blow-off Valve.
• ADS Controller features 2 inlet valves with permanent or portable air source.
• Includes Pre-cut Hoses, Push To Connect Fittings, and everything that is needed for easy installation.
• Includes 8 Quick Connect Chucks with the easy to use Betty Bar™ feature and 4 Green Tire Connect Whips with a Storage Bag
• Heavy Duty Construction with DOT approved hoses and fittings.
• Designed to work with the EGOI 2 Air Compressor, ARB and Viair Compressors
• Complete line of Air Compressor Bracket Kits Available for Under Engine, Under Seat, & Rear Cargo Area Mounting Solutions.
• 5-Year Limited Month Warranty
(3 reviews)
