JK Wrangler (2007-2018)
Showing 1–30 of 38 resultsSorted by popularity
-
Full Suspension Kits - JK Wrangler (4)
-
Shocks - JK Wrangler (3)
-
Brakes - JK Wrangler (1)
-
Control Arms - JK Wrangler (8)
-
Steering -JK Wrangler (11)
-
Bags and BoxesTHIS SHIPS FREE
within 48 US StatesOVS Extra Large Trash Bag Tire Mount – #16 Waxed Canvas
- Extra Large Tire Mount
- Waxed Canvas Duck 16 Lb Cotton
- Eco Friendly Breathable Material
- Infused with Paraffin – Waterproof
- Double Reinforced Stitching
- Heavy Duty Reinforced 10 Lb Zippers
- Over-sized Heavy-Duty Buckles
- Mounted To Spare Tire or Tailgate
- Exterior Storage Mesh Pouches
- Interior Synch To Secure Debris
- Heavy Duty Ballistic Nylon Straps
(3 reviews) -
Steering -JK WranglerTHIS SHIPS FREE
within 48 US StatesRusty’s HD Tie Rod Assembly | JK Wrangler
- Fits: 2007-2018 Jeep Wrangler JK Models
- A tie rod makes the connection between both wheels at the knuckles, sets toe angle
- Massive 1.75″ x 0.250-wall DOM tubing Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- Machined hexed ends for easy adjustment
- Zinc Plated tie rod ends for protection and long life
- HD jam nuts
- Serrated Lock Washers
- The strongest JK Tie Rod you can buy
- Built in Rainbow City, Alabama, USA
- Also made in a aluminum version
(4 reviews) -
Steering UpgradesTHIS SHIPS FREE
within 48 US StatesRusty’s HD Steering System | JK Wrangler
- Fits: 2007 to 2018 Jeep Wrangler JK Models
- Over 45 Years of Building Steering and Suspension Components
- Massive 1.75″ x 0.250-wall DOM Tubing Drag Link and Tie Rod
- Large 1.25″ threads on the U.S.A. tie rod ends, most brands are imports
- Machined hexed ends for easy adjustment
- Zinc plated tie rod ends for protection and long life
- Serrated Lock Washers
- The strongest JK steering assembly you can buy
- Steering stabilizer tie rod clamp bracket included
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in a Aluminum version
(4 reviews) -
Steering UpgradesTHIS SHIPS FREE
within 48 US StatesRusty’s Aluminum HD Steering System | JK Wrangler
- Fits: 2007 to 2018 Jeep Wrangler JK Models
- Over 45 Years of Building Steering and Suspension Components
- Massive Solid 1.825″ 7075 Aluminum Drag Link and Tie Rod precisions machined
- Large 1.25″ threads on the U.S.A. tie rod ends, most brands are imports
- Machined hexed ends for easy adjustment
- Zinc plated tie rod ends for protection and long life
- Polished to a “like Chrome finish”
- Serrated Lock Washers
- The strongest JK steering assembly you can buy
- Steering stabilizer tie rod clamp bracket included
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in a DOM steel version
(3 reviews) -
Steering DampersTHIS SHIPS FREE
within 48 US StatesRusty’s RX800 Jeep Steering Stabilizer | JT JK JL Wrangler
- Suits Jeep Wrangler JK 2007-2018 and Jeep Wrangler JL 2018+, and 2020+ Gladiator
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- A 14mm Piston Rod Provides Improved Strength
- Shaft Boot Protects Piston Rod Against Stone Damage
- 2.0″ Diameter DOM tubing outer structure
- 1.75″ Piston And Bore Allows Increased Oil Volume
- Original Stabilizer Mounts May Be Used Where Appropriate
- Includes all necessary hardware for a simple bolt-on installation
- Made in the USA
(9 reviews) -
Full Suspension Kits - JK WranglerTHIS SHIPS FREE
within 48 US StatesRusty’s Jeep JK Wrangler 2.0″ Performance Lift Kit
- Suits Jeep JK Wrangler 2007-2018
- KIT INCLUDES:
- Front 2″ Lift Coil Springs
- Rear 2″ Lift Coil Springs
- Front Adjustable Lower Control Arms
- Front Adjustable Upper Control Arms
- Rear Adjustable Lower Control Arms
- Rear Adjustable Upper Control Arms
- Front Adjustable Track Bar
- Rear Adjustable Track Bar
- Front Hydro Performance Shocks
- Rear Hydro Performance Shocks
- Rusty’s Front and Rear Stainless Steel Brake Hoses
- Front and Rear Extended Sway Bar Links
KEY FEATURES:
- Coils specifically developed from the JK, not borrowed from other platform designs
- Maintains factory ride quality while making room for a larger tire and wheel package
- Adjustable front and rear lower control arms allow dialing caster and driveline angle
- Extended front and rear sway bar links maintain factory sway bar functionality
- Available shock absorbers are tuned to work with spring rate
- Proudly Made in the USA
(8 reviews) -
Control Arms - JK WranglerTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable Front Upper Control Arms w/Forged Flex Ends | JK Wrangler
- Suits Jeep JK Wrangler 2007-2018 2 and 4 door models
- Forged Flex Joints used on the frame end
- Forged Ends are tested to over 100,000 psi
- 1.5″ DOM Tubing
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(13 reviews) -
Control Arms - JK WranglerTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable Front Upper Control Arms w/Forged Rubber Ends | JK Wrangler
- Suits Jeep JK Wrangler 2007-2018 2 and 4 door models
- Comes with highly flexible rubber bushings installed on the both ends
- 1.5″ DOM Tubing
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(13 reviews) -
Control Arms - JK WranglerTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable Front Lower Control Arms w/Forged Flex Ends – High Clearance | JK Wrangler
- Suits Jeep JK Wrangler 2007-2018 2 and 4 door models
- Comes with highly flexible rubber bushings installed on the axle end and forged flex end on the frame side
- Massive 2 inch DOM Tubing
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- Greasable and rebuildable forged flex ends
- High Clearance feature
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(13 reviews) -
Steering UpgradesTHIS SHIPS FREE
within 48 US StatesRusty’s Front Track Bar Mount Brace | JK Wrangler
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
(10 reviews) -
Steering -JK WranglerTHIS SHIPS FREE
within 48 US StatesRusty’s HD Aluminum Tie Rod Assembly | JK Wrangler
- Fits: 2007-2018 Jeep Wrangler JK Models
- Massive 1.825″ 7075 Solid Aluminum Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- Machined hexed ends for easy adjustment
- Zinc Plated tie rod ends for protection and long life
- HD jam nuts
- Serrated Lock Washers
- The strongest JK Tie Rod you can buy
- Built in Rainbow City, Alabama, USA
- Also made in a steel DOM version
(4 reviews) -
JK Wrangler (2007-2018)
Jeep Wrangler JK 4DR Long Range Auxiliary Fuel Gas Tank (17gal) 2007-2011
- Suits Jeep Wrangler JK 4-Door Models from 2007-2011 with the 3.8L V6 Gas engine (will not fit 2-door models)
- This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
- 17 gallons plus your original 22.5 gallon tank gives you a capacity of 39.5 gallons in total!!
- Tank fills using the OEM gas door and supplied parts – fuel goes into both tanks at the same time
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- Fitting time – approximately 5 hours
- Part Number JWJKPA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
- See legal notice at the bottom of the page
(5 reviews) -
JK Wrangler (2007-2018)THIS SHIPS FREE
within 48 US StatesKing 4WD Premium Jeep JK 2 Door Soft Top w/ Tinted Windows | 2010-2018
- Suits 2010-2018 Jeep Wrangler JK 2 Door soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(6 reviews) -
BrakesTHIS SHIPS FREE
within 48 US StatesPowerbrake X-Line Front Jeep Wrangler JK Big Brake Kit 2007-2018
2007-2018 Jeep Wrangler JK Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES AT LEAST 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Wheel clearance is tricky on Jeeps, as there are so many sizes and offsets. For this reason, use THIS TEMPLATE to make sure you have the proper caliper clearance from the wheel
(2 reviews) -
JK Wrangler (2007-2018)THIS SHIPS FREE
within 48 US StatesARB RD157 Air Locker Jeep JK Rubicon 35 Spline
- ARB RD157 Air Locker for factory locker replacement in the Jeep JK Rubicon 2007-2018, 35 Spline axles required.*Performance application models do not suit any original equipment axle shafts. Custom shafts to suit your specific axle assembly must be purchased
**Replacement for 32 SPL Rock- Track e-locker - Must be a Rubicon model for this air locker to work in the housing
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Installation Guide
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(5 reviews) - ARB RD157 Air Locker for factory locker replacement in the Jeep JK Rubicon 2007-2018, 35 Spline axles required.*Performance application models do not suit any original equipment axle shafts. Custom shafts to suit your specific axle assembly must be purchased
-
ExceptionsTHIS SHIPS FREE
within 48 US StatesARB RD100 Air Locker Dana 30 27 Spline, 3.73+
- ARB RD100 Air Locker for Dana 30 front axles with 27 splines and a gear ratio of 3.73 or higher numerically
- See vehicle fitment list down below
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Installation Guide
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(8 reviews) -
Shocks - JK WranglerTHIS SHIPS FREE
within 48 US StatesDobinsons Front or Rear Shocks for Jeep Wrangler JK 2007-2018
- Suits Jeep Wrangler JK from 2007 to 2018
- Choose from front or rear, 2 different lengths
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Photos for illustration purposes, they’re different front to rear
- Choose from the following shock options:
- GS29-716 – Front shocks for 0-2.5″ of lift (655mm extended, 393mm closed)
- GS29-717 – Rear shocks for 0-2.5″ of lift (655mm extended, 403mm closed)
- GS29-718 – Front shocks for 2.5-4.5″ of lift (680mm extended, 405mm closed)
- GS29-719 – Rear shocks for 2.5-4.5″ of lift (680mm extended, 412mm closed)
- Warning: Extended length shocks may require extended bump stops, brake lines, track bars, long travel coils, etc
(4 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
Full Suspension Kits - JK WranglerTHIS SHIPS FREE
within 48 US StatesRusty’s Jeep JK Wrangler 3.25″ Performance Lift Kit
- Suits Jeep JK Wrangler 2007-2018
- KIT INCLUDES:
- Front 3.25″ Lift Coil Springs
- Rear 3.25″ Lift Coil Springs
- Front Adjustable Lower Control Arms
- Front Adjustable Upper Control Arms
- Rear Adjustable Lower Control Arms
- Rear Adjustable Upper Control Arms
- Front Adjustable Track Bar
- Rear Adjustable Track Bar
- Front Hydro Performance Shocks
- Rear Hydro Performance Shocks
- Rusty’s Front and Rear Stainless Steel Brake Hoses
- Front and Rear Extended Sway Bar Links
KEY FEATURES:
- Coils specifically developed from the JK, not borrowed from other platform designs
- Maintains factory ride quality while making room for a larger tire and wheel package
- Adjustable front and rear lower control arms allow dialing caster and driveline angle
- Extended front and rear sway bar links maintain factory sway bar functionality
- Available shock absorbers are tuned to work with spring rate
- Proudly Made in the USA
(4 reviews) -
JK Wrangler (2007-2018)THIS SHIPS FREE
within 48 US StatesRusty’s Jeep JK Wrangler 2″ Starter Kit
- Suits Jeep JK Wrangler 2007-2018
- Rusty’s 2″ Plus suspension kit delivers excellent on- and off-road performance with the bonus of greater adjustability
- It is designed to retain the JK’s good on-road manners while adding articulation that delivers reliable performance in the toughest conditions
- Designed using 3-D computer modeling and subjected to severe testing in the field
- Rusty’s 2″ suspension kit provides the clearance needed for 33-inch tall tires, and 35-inch tall tires with some trimming and/or aftermarket fenders
- This kit raises stance of the vehicle exactly 2″ front and rear
- Super easy to install without any other parts required
- Great for an entry level lift without spending much money
- Maintains factory ride quality and handling characteristics
- Simple bolt-on installation with no modifications to the vehicle required
- KIT INCLUDES:
- 2 x Front 2″ JK Coil Springs
- 2 x Rear 2″ JK Coil Springs
- Front Adjustable Lower Control Arms
- Front Adjustable Track Bar
- Rear Adjustable Track Bar
- 4 x Shocks – your choice of shock type, Twin Tube or Monotube
- Proudly Made in the USA
- Installation Instructions
(8 reviews) -
JK Wrangler (2007-2018)THIS SHIPS FREE
within 48 US StatesRusty’s Jeep JK Wrangler 2″ Budget Boost Kit with Shocks
- Suits Jeep JK Wrangler 2007-2018
- This kit raises the stance of the vehicle exactly 2″ front and rear
- Super easy to install without any other parts required
- Great for an entry level lift without spending much money
- Durable polyurethane material is impervious to vehicle fluids and road grime
- Maintains factory ride quality and handling characteristics
- Simple bolt-on installation with no modifications to the vehicle required
- Easily return the vehicle to stock if desired
- KIT INCLUDES:
- 2 x Front 2″ JK Coil Spacers
- 2 x Rear 2″ JK Coil Spacers
- 4 x Shocks – your choice of shock type, Twin Tube or Monotube
- Proudly Made in the USA
- Installation Instructions
(9 reviews) -
Diff CoversTHIS SHIPS FREE
within 48 US StatesRusty’s HD Dana 35 Diff Cover
- Fits Dana 35 Rear Axles in all different years of Jeeps, such as YJ, TJ, XJ JK LJ
- Everyone knows the Dana 35 Rear Axle is one of the best ever made, so protect it!!
- Constructed of 1/4″ laser-cut steel
- CNC formed for precision fit
- Includes threaded fill plug
- Simple bolt-on installation with all hardware provided
- Powder Coated black
- Made in the USA
(7 reviews) -
Diff CoversTHIS SHIPS FREE
within 48 US StatesRusty’s HD Dana 44 Diff Cover
- Fits Dana 44 Axles prior to the Jeep Wrangler JL (they use a different version)
- Constructed of 1/4″ laser-cut steel
- CNC formed for precision fit
- Includes threaded fill plug
- Simple bolt-on installation with all hardware provided
- Powder Coated black
- Made in the USA
(5 reviews) -
Control Arms - JK WranglerTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable Front Lower Control Arms w/Forged Rubber Ends – High Clearance | JK Wrangler
- Suits Jeep JK Wrangler 2007-2018 2 and 4 door models
- Comes with highly flexible rubber bushings installed
- Rubber bushings on both ends give the best possible ride quality
- Massive 2 inch DOM Tubing
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- Maintenance Free Rubber Bushings
- High Clearance feature
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(11 reviews) -
SuspensionTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable Rear Upper Control Arms w/Forged Flex Ends | JK & JL Wrangler
- Suits Jeep JK Wrangler 2007-2017 and JL Wrangler 2018+ 2 door and 4door models
- Forged Flex Ends on both ends
- Rebuildable and greasable ends
- 1.5″ inch DOM Tubing
- Adjustment to fine-tune pinion angle, and wheelbase
- Forged Ends are tested to over 100,000 psi
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(13 reviews) -
SuspensionTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable Rear Upper Control Arms w/Forged Rubber Ends | JK & JL Wrangler
- Suits Jeep JK Wrangler 2007-2017 and JL Wrangler 2018+ 2 door and 4door models
- OE-style rubber bushings on both ends
- Massive 1.5″ inch DOM Tubing
- Adjustment to fine-tune pinion angle, and wheelbase
- Forged Ends are tested to over 100,000 psi
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(12 reviews) -
SuspensionTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable Rear Lower Control Arms w/Forged Flex Ends High Clearance | JK & JL Wrangler
- Suits Jeep JK Wrangler 2007-2017 and JL Wrangler 2018+ 2 door and 4door models
- Forged Flex End on one side, and OE-style rubber bushing on the other
- Massive 2 inch DOM Tubing
- 2″ of adjustment to fine-tune pinion angle, and wheelbase
- Forged Ends are tested to over 100,000 psi
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(12 reviews) -
SuspensionTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable Rear Lower Control Arms w/Forged Rubber Ends | JK & JL Wrangler
- Suits Jeep JK Wrangler 2007-2017 and JL Wrangler 2018+ 2 door and 4door models
- Comes with highly flexible rubber bushings installed
- Rubber bushings on both ends give the best possible ride quality
- Massive 2 inch DOM Tubing
- 2″ of adjustment to fine-tune pinion angle, and wheelbase
- Maintenance Free Rubber Bushings
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(13 reviews) -
Rusty's Off RoadTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable JK Front Track Bar | Jeep JK Wrangler
- Fits: 2007-2018 Jeep JK Wrangler Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings at both ends
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(5 reviews) -
Rusty's Off RoadTHIS SHIPS FREE
within 48 US StatesRusty’s Adjustable JK Rear Track Bar | Jeep JK Wrangler
- Fits: 2007-2018 Jeep JK Wrangler Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings at both ends
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(11 reviews)













































































