Your cart is currently empty!
Lexus
Showing 271–300 of 330 resultsSorted by popularity
-
Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX470 & Land Cruiser 100 Series Skid Plate Set Aluminum (4 Pcs)
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 4.7L V8 Gasoline Engines
- The Lexus LX 470 / Land Cruiser 100 Skid Plate Kit (4 Pcs) contains a Front skid plate (558055), Transmission skid plate (558063), Transfer Case skid plate (558067), Fuel Tank skid plate (534470).
- There is also a 3pc set without the fuel tank skid plate included
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser 100’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 47.7 kg (105 lb).
- Proudly made in Israel.
(3 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX470 & Land Cruiser 100 Series Skid Plate Set Aluminum (3 Pcs)
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 4.7L V8 Gasoline Engines
- The Toyota Land Cruiser 100 / LX 470 Skid Plate (3 Pcs) contains: Front skid plate (558055), Transmission skid plate (558063), Transfer Case skid plate (558067)
- There is also a 4pc set with a fuel tank skid plate included
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser 100’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 37.7 kg (83 lb).
- Proudly made in Israel.
(3 reviews) -
Gull Wing Windows
Toyota Land Cruiser 100 Series Gull Wing Window 1998-2007
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 SUV’s
- Options for the rear left (USA driver’s side) and rear right (USA passenger’s side)
- 3mm aluminum outer panel
- 2mm stainless steel inner mounts and structure
- Powder coated texture black
- Thick rubber seal
- Lockable compression latches
- Stainless steel hinges
- Gas strut to assist with opening
- Requires assembly and installation
- Simple and reversible installation
- Made in Australia by The Cruiser Company
- Installation Instructions
(9 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons 2-3″ MRR 3-Way Adjustable Lexus GX550 Lift Kit
- Suits 2024-2025+ Lexus GX550
- Choose from 2 to 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
-
The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Front MRR struts assembly instructions
- Front MRR installation instructions
- Rear Shocks Installation Instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
- NOTE: The GX550 with the Overtrail edition or any other edition with an electrical plug on the rear shocks will eventually show an error code on the dash. The only way to get rid of the code for right now is to plug in the old shocks and it goes away temporarily. Waiting on someone to create a module to trick the system
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons 2-3″ IMS Lexus GX550 Lift Kit
- Suits 2024-2025+ Lexus GX550
- Choose from 2 to 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat height should be set at 237mm (9.3″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
- NOTE: The GX550 with the Overtrail edition or any other edition with an electrical plug on the rear shocks will eventually show an error code on the dash. The only way to get rid of the code for right now is to plug in the old shocks and it goes away temporarily. Waiting on someone to create a module to trick the system
(0 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesLongfield IFS +3.5″ CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- +3.5″ length for use on +3.5″ long travel kits (cannot be used with stock lower control arms)
- Longfield IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- 35-spline CV Joint stars & axle shafts.
- Available in direct stock replacement versions & long-travel versions.
- CV Joints housings are 100% SAE 4340 Chromoly Steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 Chromoly Steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-Resistant 52100 Alloy Steel Bearing Balls.
- All Components Precision Polished to Remove Imperfections and Prevent Stress Risers.
- CV Joints Black Oxide & Powder-Coat Finish for Corrosion Resistance.
- CV Joints are pre-lubricated with racing-grade Red Line CV-2 Moly Grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(5 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesLongfield IFS +2.75″ CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- +2.75″ length for use on +2.75″ long travel kits (cannot be used with stock lower control arms)
- Longfield IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- 35-spline CV Joint stars & axle shafts.
- Available in direct stock replacement versions & long-travel versions.
- CV Joints housings are 100% SAE 4340 Chromoly Steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 Chromoly Steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-Resistant 52100 Alloy Steel Bearing Balls.
- All Components Precision Polished to Remove Imperfections and Prevent Stress Risers.
- CV Joints Black Oxide & Powder-Coat Finish for Corrosion Resistance.
- CV Joints are pre-lubricated with racing-grade Red Line CV-2 Moly Grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(7 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesLongfield IFS +2.00″ CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- +2.00″ length for use on +2.00″ long travel kits (cannot be used with stock lower control arms)
- Longfield IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- 35-spline CV Joint stars & axle shafts.
- Available in direct stock replacement versions & long-travel versions.
- CV Joints housings are 100% SAE 4340 Chromoly Steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 Chromoly Steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-Resistant 52100 Alloy Steel Bearing Balls.
- All Components Precision Polished to Remove Imperfections and Prevent Stress Risers.
- CV Joints Black Oxide & Powder-Coat Finish for Corrosion Resistance.
- CV Joints are pre-lubricated with racing-grade Red Line CV-2 Moly Grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(5 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesLongfield IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard/Stock length for use on lifted and non-lifted applications
- Longfield IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- 35-spline CV Joint stars & axle shafts.
- Available in direct stock replacement versions & long-travel versions.
- CV Joints housings are 100% SAE 4340 Chromoly Steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 Chromoly Steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-Resistant 52100 Alloy Steel Bearing Balls.
- All Components Precision Polished to Remove Imperfections and Prevent Stress Risers.
- CV Joints Black Oxide & Powder-Coat Finish for Corrosion Resistance.
- CV Joints are pre-lubricated with racing-grade Red Line CV-2 Moly Grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(8 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesPower Flow Land Cruiser 200 Series Steering Rack – All New
- Direct replacement for Toyota OEM Part Number 44200-60170 for Land Cruiser 200 Series and Lexus LX570 5.7L V8 2008-2021
- High-quality LC200 OEM-style Replacement
- Brand New Rack, NOT rebuilt
- No core charge and no return shipping of the old unit required
- Largest & strongest Toyota-size steering rack
- Has 3rd rack mount that Tacoma or Tundra racks do not have.
- High-temperature seals
- M22-1.5 Threaded Tie Rod ends
- Can be used as an OEM replacement or as part of the All Pro +3.50″ Modular Long Travel Kit or similar
- Adaptation is required for this to fit Tacoma, 4Runner, GX470, GX460 and FJ Cruiser – that adaptation comes with the long travel kit (sold separately)
- Includes only what is in the photos
- You can add a Tie Rod Kit down below to make your own tie rods
(3 reviews) -
Apache OffroadFREE SHIPPING
within 48 US StatesApache Offroad AX2 IFP Struts Pair | 03-09 4Runner, 06-09 FJ, 05-23 Tacoma, GX470
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009, suitable for 0 – 3.5″ of lift
- 3 Spring seat settings: OEM height 0″ (213mm), +1″ (226mm), and +1.5″ (231mm)
- Use with OEM coils for a mild lift by preloading, or run lifted coils like Dobinsons
- Direct Bolt on Installation
- Proprietary high-Zinc content paint coating for superior protection against rock chips and abrasion damage
- Nitrogen Charged Monotube 2.2″ Body Design
- Internal Floating Piston- Separates the oil and nitrogen to prevent shock fade
- Fully rebuildable and revalvable
- Linear Valving
- Hardened Chrome Piston shaft- resists rock damage and corrosion
- Precision Japanese CNC machined, High Flow 50mm Piston
- Heavy Duty Ultra Low Friction Japanese 3 Stage Seal System
- High Quality German Oil
- Heavy Duty Lower Leg
- Hardened Rubber Lower Bushing provides a long an quiet life
- T6 6061 Aluminum Spring Seat
- Heavy Duty Spring Seat Circlip
- Heavy Duty 1/8″ (3mm) DOM wall thickness
- Down travel Spacer (under top hat spacer shaft spacer/extender) to provide adequate down travel for lift heights of 3-3.5″- Eliminates the need to rebuy extended travel struts when making changes to taller lift heights. Ideal for those who change their lift height overtime. Works by extending the point at which the upper washer sits on the shaft, thus raising the mounting position of the top hat and increasing down travel. Use for lifts 3-3.5″
- Works from 0-3.5″ of lift
- 2 Year Manufacturer’s Warranty
- No set rebuild periods
- 430mm Compressed, 570 mm Extended without DT Spacer, 575mm Extended with DT Spacer
- SOLD IN PAIRS – Includes new washers and bushings for the top, and lower bushings are pressed in
(10 reviews) -
250 Series Land Cruiser (2024-2025+)
Dobinsons C59-816 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with 150-220 constant front end weight (bumper, winch, etc) with the 2.4L or 2.7L gas engine.
- Lifts Lexus GX550 2.0″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024-2025+)
Dobinsons Strut Mounts Pair for Toyota Land Cruiser 250 + GX550
- Made specifically for the 4×4 Toyota Land Cruiser 250 Series and Lexus GX550 2024-2025+
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(0 reviews) -
LX600 (2022+)FREE SHIPPING
within 48 US StatesDobinsons Lexus LX600 IMS Lift Kit (0-3″ Lift)
- Suits Lexus LX600 from 2022 onwards
- Upgrade your suspension from stock height up to 3″ of lift with all new Dobinsons parts
- Shocks Do Not Suit Sahara ZX And GR Sport Models With Factory Electronic Shock Absorbers
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Australian Center-of-Hub to Fender original measurements are as follows: (compare to your vehicle for correct lift height estimate)
- Front: 20.25″
- Rear: 22.5″
(0 reviews) -
LX600 (2022+)FREE SHIPPING
within 48 US StatesDobinsons Lexus LX600 MRR 3-Way Adjustable Lift Kit (0-3″ Lift)
- Suits Lexus LX600 from 2022 onwards
- Upgrade your suspension from stock height up to 3″ of lift with all new Dobinsons parts
- Shocks Do Not Suit Sahara ZX And GR Sport Models With Factory Electronic Shock Absorbers
- Complete MRR suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- MRR = Monotube Remote Reservoir
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front MRR Struts, 2 Rear MRR Shocks, and 4 Coil Springs
- Australian Center-of-Hub to Fender original measurements are as follows: (compare to your vehicle for correct lift height estimate)
- Front: 20.25″
- Rear: 22.5″
(0 reviews) -
Dobinsons
Dobinsons C59-846 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 75mm – 3″ / 160-220LB Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 460mm free height, 19mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-844 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 75mm – 3″ / Stock Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 460mm free height, 18mm wire diameter, 485 LBF/in spring rate
- Sold in Pairs
(0 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-824 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / 160-220lb Constant Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 19mm wire diameter, 531 LBF/in spring rate
- Sold in Pairs
(0 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A660 3-Way Adjustable Front Struts Pair
- Suits 2024+ Toyota Land Cruiser 250 Series and Lexus GX550
- Can be used with OEM coils or with Dobinsons lifted coils
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Installation Instructions
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Photos for illustration purposes only
(0 reviews) -
300 Series Land Cruiser (2021+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A440 3-Way Adjustable Front Struts Pair
- Suits 2022+ Toyota Land Cruiser 300 Series (not sold in the USA) and Lexus LX600, and is an Extended Travel option for 2024+ Land Cruiser 250 Series and Lexus GX550
- Can be used with OEM coils or with Dobinsons lifted coils
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A440 should be set at 237mm (9.3″) from the strut bushing eye
- Specifications – 624mm extended, 453mm compressed
- Photos for illustration purposes only
- Installation Instructions
- Note: If installed on a Toyota Land Cruiser 250 Series or Lexus GX550, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
- It is highly recommended to run these bump stops with these – BS59-560
(0 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-169B Rear Coil Springs | Land Cruiser – Pair Black
- 80 SERIES (1990-1997) and Lexus LX450 – Dobinsons C59-169 1.75″ with up to 220lbs weight
- 100 SERIES (1998-2007) and Lexus LX470 – Dobinsons C59-169 – 1″ lift, linear rate, with stock weight. For slightly above OE stock height. Ideal if someone is doing AHC removal but doesn’t want to add lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold in Pairs
- 465/475mm free height, 227 LB spring rate
(0 reviews) -
Bilstein
Bilstein 25-325096 – 5160 Series Rear Right Shock
- Suits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, 2006-2017 FJ Cruiser
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.5 Inch
- Compressed Length (IN): 14.25 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: Yes
- Includes Dust Shield: Yes
- Includes Hardware: Yes
- Includes Boot: Yes
- Estimated Install Time (Hours): 1
- Sold individually – This is the Right (passenger) side rear shock
- Link to matching left side shock
(7 reviews) -
Bilstein
Bilstein 25-311211 – 5160 Series Rear Left Shock
- Suits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, 2006-2017 FJ Cruiser
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.5 Inch
- Compressed Length (IN): 14.25 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: Yes
- Includes Dust Shield: Yes
- Includes Hardware: Yes
- Includes Boot: Yes
- Estimated Install Time (Hours): 1
- Sold individually – This is the Left (driver’s) side rear shock
- Link to matching right side shock
(7 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.5 Lexus GX460 DCA Remote Resi Coilovers
- Suits Lexus GX460 2010-2023 non-KDSS models
- Will not suit KDSS models due to the front reservoir mounting position
- Comes preset to 2.0″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.5 DCA coilover shocks with remote reservoirs Pair
- Coils installed are 13” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts with reservoir brackets
- Spanner wrench
- All necessary mounting hardware
- Installation instructions
- Installation video is down below
- Matching Rear Shocks
(4 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP Mid Travel Package | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen Toyota 4Runner 2003-2024, Lexus GX470 2003-2009 and Lexus GX460 2010-2023
- Includes preassembled front Coilovers, Rear Shocks, and preassembled UCA’s
- Front comes preset to 2.0″ of lift with stock weight
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of front lift, rear shocks suit 1.5″ of lift
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.0 Dirt King IFP Series coilovers Pair
- Coils installed are 13” long, 700 LBF/in Spring Rate
- 2.0 Dirt King IPF Smooth Body Rear Shocks Pair
- Dirt King Tubular Ball Joint UCA’s
- Sway bar relocation mounts
- Spanner wrench to adjust height/preload
- All necessary mounting hardware
- Installation instructions
(7 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP Smooth Body Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Suits up to 1.5″ of lift
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- What’s Included:
- 2.0” IFP smooth body shocks Pair
- Shock shaft boots
- All necessary mounting hardware
- Installation instructions
(4 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP GX460 Coilovers Pair | Lexus GX460 2010-2023
- Suits Lexus GX460 2010-2023 (all years)
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.0 Dirt King IFP Series coilovers Pair
- Coils installed are 13” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts
- Spanner wrench to adjust height/preload
- All necessary mounting hardware
- Installation instructions
- Matching Rear Shocks
(4 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP GX470 Coilovers Pair | Lexus GX470 2003-2009
- Suits Lexus GX470 2003-2009
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.0 Dirt King IFP Series coilovers Pair
- Coils installed are 13” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts
- Spanner wrench to adjust height/preload
- All necessary mounting hardware
- Installation instructions
- Matching Rear Shocks
(4 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesFront 4Runner Long Travel Kit | 4Runner FJ GX460 2010-2024
- Suits Toyota 4Runner 5th Gen and Lexus GX460 2010-2024, and FJ Cruiser 2010-2016
- 4WD requires long travel axle shafts or full axle assemblies
- Wheel Travel Specs, Tire Size and Shock recommendations are down below
- Bolt on application, minimal modifications required
- Utilizes American made FK bearings
- 4130 chromoly uniball cups
- Choice of ¾” heims or poly bushings for the UCA’s
- Delrin bushings for the LCA’s
- Zinc plated inner bushing sleeves
- Grease fittings for easy servicing
- 3/16″ and 1/8” boxed plate construction
- Internally ribbed with extrusions for weight reduction
- Bump stop plating
- Limit strap tabbing
- Bypass Tabbing
- To achieve the full amount of travel on 4WD models you must install a 1” diff drop kit and machine the inner CV’s for more articulation
- MADE IN THE USA
(7 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesFront 4Runner Long Travel Kit | 4Runner FJ GX470 2003-2009
- Suits Toyota 4Runner 4th Gen and Lexus GX470 2003-2009, and FJ Cruiser 2006-2009
- 4WD requires long travel axle shafts or full axle assemblies
- Wheel Travel Specs, Tire Size and Shock recommendations are down below
- Bolt on application, minimal modifications required
- Utilizes American made FK bearings
- 4130 chromoly uniball cups
- Choice of ¾” heims or poly bushings for the UCA’s
- Delrin bushings for the LCA’s
- Zinc plated inner bushing sleeves
- Grease fittings for easy servicing
- 3/16″ and 1/8” boxed plate construction
- Internally ribbed with extrusions for weight reduction
- Bump stop plating
- Limit strap tabbing
- Bypass Tabbing
- To achieve the full amount of travel on 4WD models you must install a 1” diff drop kit and machine the inner CV’s for more articulation
- MADE IN THE USA
(7 reviews)