Your cart is currently empty!
Coil Springs
Showing 91–120 of 309 resultsSorted by popularity
-
Sequoia 3rd Gen (2023-2024+)Dobinsons Rear Coil Spring Options | Toyota Sequoia 2023+ – Pair
- Suits Toyota Sequoia 2023+, choose the appropriate lift height that also matches any added weight you’ve put on the car
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Coils are Sold in Pairs
- Lifting the rear 2″ requires a new Panhard Rod to re-center the axle
- Lifting 1″ or more, new rear sway bar links are necessary
- 2″ of rear lift also requires longer shocks than stock
(14 reviews) -
Dobinsons
Dobinsons Front Coil Spring Options for Lexus GX460 2010-2023 – Pair
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- OE spring rate on a V8 GX460 is 730LB (same as the C59-350, 352,354). Lighter than stock springs shouldn’t be use unless you want it softer than stock, which will increase nose diving while braking.
- C59-300 – 1.5″ with stock weight (comfort spring rate)
- C59-302 – 2.0″ with stock weight (comfort spring rate)
- C59-314 – 2.5″ with stock weight (comfort spring rate)
- C59-350 – 2″ with stock weight
- C59-352 – 2.5″ with stock weight, 2″ with 110-220lbs weight
- C59-354 – 2″ with 220-350lbs weight, 2.5″ with 110lbs weight
(8 reviews) -
Tundra 3rd Gen (2022-2024)Dobinsons 2.5″ Lift Rear Coil Springs for Toyota Tundra 2022+ – Pair
- Suits Toyota Tundra 2022+, lifts the rear 2.5″ with stock weight (no accessories)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
- Stock base model shocks are ok with 1″ lift but they’re not very long. TRD Pro rear shocks are ok for up to 2″ of lift
(8 reviews) -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons C29-151 Rear Lifted Coils for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Trailhawk (AD2) lifts 1.0″ rear. Sport (AD1) models lift 2″ rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powder coated in a long lasting black color
(5 reviews) -
Dobinsons
Dobinsons C45-423 Rear Coil Springs for Pathfinder R52 & R53 – Pair
- These are for the independent rear suspension Pathfinder R52 models 2013-2020 and R53 2021+
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
- C45-423 Rear coils will lift 30mm over original height with the added weight of 300-500LBS of constant weight, (for example, towing a heavy trailer)
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-313 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-313 4″ lift with 400-750lbs of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 545/555mm free height, 21mm wire, 318LBF/in rate
- Sold in Pairs
(18 reviews) -
Coil Springs - 4th Gen 4Runner
Dobinsons Front Coil Spring Options for V8 Toyota 4th Gen 4Runner 2003-2009 – Pair
- THIS IS FOR V8 ENGINE 4X4 MODELS ONLY – V6 models use a different set of specs
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- All specs are listed for 4×4 models. 2WD models lift about 1″ more due to less weight
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 1/4-1/2″
- C59-296 – Stock front end, 1.0″ lift
- C59-300 – Stock front end, 1.5″ lift
- C59-302 – Stock Weight – 2.0″ | with 110-150lbs – 1.5″
- C59-314 – Stock Weight – 2.5″ | with 110-220lbs – 2.0″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 110-220lbs – 2.0″ | Heavy rate coils
- C59-354 – 2.5″ with 110-150lbs | with 220-300lbs – 2.0″ | Heavy rate coils
(12 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-545 3″ HD Land Cruiser 200 Series Rear Coils – Pair
- C59-545 – 4″ lift with stock weight, 3″ lift with 220 LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/470mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(7 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-146VTB Dual Rate Front 2.5″ Coils | 80 Series 1990-1997 (Black) – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 2.5″ with 200LBS front end constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
(10 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-145VTB Dual Rate Rear 3.5″ Coils | 80 Series 1990-1997 (Black) – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 3.5″ with full rear bumper, tire carrier, roof rack, drawers, 2nd tank, etc. Lifts more without as much weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
(19 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VTB Dual Rate 2.5″ Rear Coils | 80 Series 1990-1997 (Black) – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Lifts 2.5″ with 400LBS rear constant load. Lifts more with less weight on the vehicle
- Also made in the teal color
(15 reviews) -
Bronco (2021-2024+)
Dobinsons Ford Bronco Rear Coils | C19-569V – Pair
- Dobinsons C19-569V Suits Ford Bronco:
-
- 4 Door – BL, Wildtrack, First Edition – 150-350Lb Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50099
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(11 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-244 2.5″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair
- Dobinsons C59-244 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96
- Lifts 2.5″ with bumper AND winch weight of 110-150lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(7 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-288 1.75″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Teal
- Dobinsons C59-288 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96 1.75″ with bumper OR winch weight of 110lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-310 Front Coil Springs | Land Cruiser 80 series 6.0″ Lift with 220LBS – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-310 are Front Linear rate coils to give 6.0″ of lift with 220 LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 575/585mm free height, 20mm wire, 333LBF/in rate
- Sold in Pairs
(17 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-308 Front Coil Springs | Land Cruiser 80 Series 4.0″ Lift 110-160LBS Load – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-308 are Front Linear rate coils to give 4.0″ of lift with 110 to 160 LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 555/565mm free height, 19mm wire, 276LBF/in spring rate
- Sold in Pairs
(14 reviews) -
Coil Springs - 4th Gen 4Runner
Dobinsons Front Coil Spring Options for V6 Toyota 4th Gen 4Runner 2003-2009 – Pair
- THIS IS FOR V6 ENGINE 4X4 MODELS ONLY – V8 models use a different set of specs
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- All specs are listed for 4×4 models. 2WD models lift about 1″ more due to less weight
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 3/4″ to 1″
- C59-296 – Stock front end, 1.5″ lift
- C59-300 – Stock front end, 1.75-2.0″ lift
- C59-302 – Stock – 2.5″ | with 110-150lbs – 2″
- C59-314 – Stock – 3″ | with 110-220lbs – 2.5″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 220-300lbs – 2″ | Heavy rate coils
- C59-354 – With 220-300lbs – 2.5″ | Heavy rate coils
(13 reviews) -
Sequoia 3rd Gen (2023-2024+)
Dobinsons C59-817V Rear Coil Springs Pair
- Dobinsons C59-817V Rear Coils for the 2023+ Toyota Sequoia (stock height) and 2021+ Land Cruiser 300 Series (10mm lift)
- On a Sequoia, these are Stock Height coils with Stock Weight on a standard model (not for TRD Pro)
- 2024+ Land Cruiser 250 – 40mm(1.6″) Lift with 175-330LBS constant rear added weight
- 2024+ Tacoma 3.0″ lift with stock weight, 2.25″ lift with 100lbs constant added weight, 1.25″ lift with 175-330lbs constant weight added.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are recommended
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(12 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons C29-150 Front Coils for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Dobinsons C29-150 Trailhawk (AD2) lifts 1.25″ front. Sport (AD1) models lift 2″ front
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powdercoated in a long lasting black color
(4 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-176 Front Coil Springs | Land Cruiser 80 series 3.0″ Lift with 110LBS Load – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-176 are Front Linear rate coils to give 3.0″ of lift with up to 110LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(17 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons C59-578 Front 3″ HD Lift Coil Springs | Toyota Tundra 4×4 2007-2021 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Lifts 4″ with stock weight front end, and 3″ with a bumper and winch installed
- Sold in Pairs
- 662LBF/in spring rate, 440mm free height
(18 reviews)$405.00 Select options This product has multiple variants. The options may be chosen on the product page -
Honda
Dobinsons C23-105 Rear Coil Springs for Honda CRV 2002-2006 40mm 1.5″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
Sequoia 3rd Gen (2023-2024+)
Dobinsons C59-821V Rear Coil Springs Pair
- Dobinsons C59-821V Rear Coils for the 2023+ Toyota Sequoia, 2022+ Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series
- Lifts 2″ with Stock Weight on a standard model, 1″ with 220-440LBS constant added weight, and 1″ with stock weight on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- Also suits 2021+ Land Cruiser 300 Series, gives 30mm lift with 220-440LBS constant added weight.
- Also suits 2024+ Land Cruiser 250 – 2.0″ Lift with 990-1200LBS constant rear added weight
- Also suits the 2024+ Toyota Tacoma – 2.25″ lift with 440-660lbs constant weight added, 1.25″ lift with 880-1210lbs constant weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(4 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 2nd Gen (1990-1995)
Dobinsons C59-159V Rear 2″ Coils for Toyota 4Runner 2nd Gen – Pair
- Suits 2nd Gen Toyota 4Runner 1990-1995
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Dobinsons C59-159V – 2″ rear lift – variable rate coils
- 2″ lift is 2″ over OE stock height. Keep this in mind, as these old trucks will be sagged below stock height
(4 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-247 2.5″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair
- Dobinsons C59-247 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 2.5″ with 220lbs of rear constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(9 reviews) -
Honda
Dobinsons C23-104 Front Coil Springs for Honda CRV 2002-2006 40mm 1.5″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-223VB Rear Coil Springs | Land Cruiser – Pair Black
- 80 SERIES (1990-1997) and Lexus LX450 – Dobinsons c59-223v – 1.75″ lift with up to 220lbs weight
- 100 SERIES (1998-2007) and Lexus LX470 – Dobinsons C59-223V – 1-1.25″ lift, variable rate, with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 19mm wire diameter, 445/455mm free height, variable rate
- Sold in Pairs
(0 reviews) -
Rav4
Dobinsons 2.0″ Lift Toyota Rav4 Rear Coil Springs 2019-2024 – Pair
- Suits the rear of Toyota Rav4 from 2019-2024 models – lifts 50mm (2.0″)
- Lifting with proper coil springs and struts and shocks is the right way to raise up a vehicle, get the ground clearance and looks you’re after as well as improve the ride quality in all terrains that you take your vehicle in
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil spring pair
- Spring rate is 200LBF/in
- These are intended to be used with Dobinsons struts and shocks
- Choose your preferred color down below
(8 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sequoia 3rd Gen (2023-2024+)
Dobinsons C59-819V Rear Coil Springs Pair
- Dobinsons C59-819V Rear Coils for the 2023+ Toyota Sequoia and 2022+ Land Cruiser 300 Series (30mm lift)
- Lifts the Sequoia 1.0″ with Stock Weight on a standard model and 0″ with stock weight on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- Also suits 2024+ Land Cruiser 250 – 1.6″ Lift with 550-770LBS constant rear added weight
- Suits 2024+ Tacoma – 2.25″ lift with 175-330lbs constant weight added, 1.25″ lift with 440-660lbs constant weight added.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are necessary at this lift height
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(15 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page
