Your cart is currently empty!
Coil Springs
Showing 61–90 of 284 results
-
Sequoia 2nd Gen (2008-2022)
Dobinsons Stock Height Rear Coils for Toyota Sequoia 2008-2022 5.7L V8
- C59-475 are made specifically for the 2008 to 2022 Toyota Sequoia as new stock height replacement coils
- These will replace your worn out factory coils and bring it back to the original factory height
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 624LBF/in spring rate
- Sold in Pairs
- Can be used with stock rear shocks or Dobinsons GS59-713 or IMS59-60713
$405.00 Add to cart -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-544 2.5″ Land Cruiser 200 Series Front Coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 455/450mm free height, 19mm wire, 580LB rate
- Sold as a Pair
$270.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-269V Rear Coil Springs | Land Cruiser 80 Series
- c59-269v 1.75″ Comfort ride spring with only stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 480/490mm free height, 17mm wire, variable rate
- Sold in Pairs
$270.00 Add to cart -
4Runner 5th Gen (2010-2024)
Dobinsons Front 1.0″ Lift Coils for Toyota 4Runner TRD PRO
- Provides 1.0″ lift over stock height by changing only the coils. No other mods required, except an alignment afterwards
- Suits Bilstein and Fox TRD Pro Struts ONLY with flat-ground coils top and bottom
- Will NOT work on 2021 models with a step in the lower coil seat
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Red
- C59-758R replaced C59-748R, minor design change
- Sold in Pairs
$305.00 Add to cart -
Tundra 3rd Gen (2022-2024)
Dobinsons C59-838 Front Springs | Toyota Tundra 2022+ Sequoia 2023+
- Suits Toyota Tundra 2022+ and Sequoia 2023+
- Lifts the Tundra 3.0″ and the Sequoia 4.0″ with stock weight (no accessories)
- Fully Designed, Manufactured, and Finished In Australia
- These will NOT suit TRD PRO Struts
- TRD Pro models came with 1″ lift from the factory, so subtract that if you’re switching to a full Dobinsons kit
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$305.00 Select options -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-535 2-3″ Land Cruiser 200 Series Rear Coils
- C59-535 – 3″ lift with stock weight, 2.0″ with 220LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair – marked side specific for installation
$305.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-171 Rear Coil Springs | Land Cruiser
- 80 Series (1990-1997) – Dobinsons c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- 100 Series (1998-2007) – Dobinsons C59-171 – 1.5″ lift, linear rate, with 880LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 485/495mm free height, 328LBF/in rate
- Sold in Pairs
$405.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-170 Front Coil Springs | Land Cruiser 80 Series 3.0″ Lift with 220LBS Load
- C59-170 are Front Linear rate coils to give 3.0″ of lift with 110 to 220 LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$305.00 Add to cart -
Tundra 3rd Gen (2022-2024)
Dobinsons 1.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ (550-770LBS)
- Suits Toyota Tundra 2022+, lifts the rear 1.0″ with 550-770LBS of rear constant weight
- Variable rate springs for the best ride quality
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$305.00 Select options -
Sequoia 1st Gen (2001-2007)
Dobinsons Rear Stock Height Coils for Toyota Sequoia 4×4 2001 to 2007 4.7L V8
- Stock height replacement rear coils for Toyota Sequoia 2001-2007 4×4
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment
- High Intensity Shot Peened
- Formed on Precision Mandrels
- Precise End Configurations
- Sold in Pairs
$270.00 Add to cart -
4Runner 4th Gen (2003-2009)
Dobinsons C59-331 Rear Coils | 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 410mm, 19mm wire, 349LB Rate
$270.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-309 Rear Coil Springs | Land Cruiser 80 Series
- c59-309 4″ lift with 110-220lbs weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 520/530mm free height, 20mm wire, 274LBF/in rate
- Sold in Pairs
$405.00 Add to cart -
Suspension
Dobinsons Coil Spring Touch Up Paint
- Small bottle of enamel touch up paint (like a nail polish bottle size)
- Color matched to the Dobinsons coil colors
- Teal, black or red, make your selection below
- Shake well before use!!!
$25.00 Select options -
Tundra 2nd Gen (2007-2021)
Dobinsons C59-780 3″ Lift Coil Springs Tundra 4×4 2007-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Sold in Pairs
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Lifts 3″ with stock weight front end
- 662LBF/in spring rate
$405.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-312 Front Coil Springs | Land Cruiser 80 Series 4.0″ Lift with 200-300LBS Load
- C59-312 are Front Linear rate coils to give 4.0″ of lift with 200 to 300 LBS of constant accessory weight,
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 560/570mm free height, 20mm wire, 314LBF/in rate
- Sold in Pairs
$405.00 Add to cart -
Coil Springs - Lexus GX460
Dobinsons Rear Coil Spring Options for Lexus GX460 2010-2023
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- Vehicles with KDSS lifting 1.5″ or more should add a PS59-4025 trim spacer for the passenger side
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 3/4-1″ with stock weight
- C59-505 – 1.25-1.5″ with stock weight
- C59-325 – 1.75-2″ with stock weight
- C59-327 – 1.75″ with 200-400lbs weight, 2.25″ stock weight
- C59-329 – 1.75″ with 400-800lbs weight
- C59-331 – 1.75″ with 800-1200lbs weight (teal only)
- C59-675V – 2.25″ with stock weight – variable rate coil
- C59-677V – 3″ with stock weight, 2.5″ with 200-300LBS – variable rate coil
- C59-701V – 3″ with 300-600LBS of constant weight – variable rate coil
- C59-749V – 3″ with 600-800LBS or more of constant weight – variable rate coil
- C59-849V – 3″ long travel, requires 1000LBS minimum rear constant added weight – variable rate coil (TEAL ONLY)
From $270.00 Select options -
4Runner 3rd Gen (1996-2002)
Dobinsons Front Lifted Coil Options for Toyota 4Runner 3rd Gen 1996-2002
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- C59-276 – Lifts 2″ on a stock to medium load front end
- C59-134 – Lifts 2″ on a heavy load front end up to 220LBS
From $270.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-166 Front Coil Springs | Land Cruiser 80 Series 2.5″ Lift no Load, 2.0″ with up to 220LBS Load
- C59-166 are Front Linear rate coils to give 2.0″ of lift with 110 up to 220 LBS of accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$270.00 Add to cart -
Dobinsons
Dobinsons Tacoma Front Coils Options | Toyota Tacoma 4×4 2005-2023
- Choose what coil suits your vehicle and needs the best
- All specs listed are for 4×4 Dual Cab Short or Long Beds
- Sold as a Pair
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- Note: Access Cab models come with 1″ lift from the factory. Deduct 1″ lift from the lifted heights, or add longer/taller struts to regain that 1″
- C59-238 – 0-1/4″ lift Closest to stock height
- C59-300 – 1″ Lift with stock front end
- C59-302 – 1.6″ Lift stock front end, 1.25″ with light bumper OR winch
- C59-314 – 2″ lift stock front end, 1.75″ with 100LBS
- C59-350 – 1.5″ to 1.75″ with 200-240LBS, 2″ with stock weight (heavy rate)
- C59-352 – 2″ lift with 180-220 lbs, or 2.4″ with stock weight (heavy rate)
- C59-354 – 2.4″ lift with 180-220LBS, or 2″ with 280-300LBS (heavy rate)
- C59-318 – 3.0″ lift with 110-220LBS (heavy rate)
From $270.00 Select options -
Tundra 3rd Gen (2022-2024)
Dobinsons 2.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ (550-770LBS)
- Suits Toyota Tundra 2022+, lifts the rear 2.0″ with 550-770LBS of rear constant weight
- Variable rate springs for the best ride quality
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$305.00 Select options -
Tundra 3rd Gen (2022-2024)
Dobinsons 2.5″ Lift Rear Coil Springs for Toyota Tundra 2022+
- Suits Toyota Tundra 2022+, lifts the rear 2.5″ with stock weight (no accessories)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$270.00 Add to cart -
4Runner 3rd Gen (1996-2002)
Dobinsons C59-297V Rear Lifted Coils for Toyota 4Runner 3rd Gen
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- Dobinsons C59-297V – 2″ rear lift with 330LBS+ rear constant load – variable rate coils
$270.00 Add to cart -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-540 1.4″ Land Cruiser 200 Series Front Coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 435/430mm free height, 19mm wire, 580LB rate
- Sold as a Pair
$270.00 Select options -
Suspension
Dobinsons C45-256 Front Lifted Coil Springs for Nissan Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 375mm free height, 541LBF/in spring rate
- C45-256 – 1.6″ – Nissan Xterra (2005-2015) with stock front end weight
- C45-256 – 1.6″ – Nissan Frontier D40 with up to 110LBS constant weight
- C45-256 – Nissan D41 2022+ models, 2.5″ with stock weight, 2″ with 110lbs constant weight
$270.00 Select options -
Dobinsons
Dobinsons C45-421 Rear Coil Springs for Pathfinder R52 & R53
- These are for the independent rear suspension Pathfinder R52 models 2013-2020 and R53 2021+
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
- C45-421 Rear coils will remain at stock height with 300-500LBS constant weight (for example, towing a heavy trailer)
- C45-421 Rear coils will lift 30mm over original height with the stock rear end weight (unloaded)
$405.00 Add to cart -
Tundra 2nd Gen (2007-2021)
Dobinsons C59-610 Front 2.25″ Lift Coil Springs for Toyota Tundra 4×4 2007-2021
- 2.25″ lift with a bumper and winch installed
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Sold in Pairs
- 737LBF/in spring rate
$405.00 Select options -
Dobinsons
Dobinsons C59-849V 3.0″ Lift w/1000LBS+ Constant Load Coil Springs | 4Runner GX460
- Suits 2003-2024 Toyota 4Runner and 2010-2023 Lexus GX460 – Lifts 3.0″ with a minimum of 1000LBS of added rear constant weight (bumper, drawers, fridge, RTT, etc)
- Heaviest Long Travel and Variable Rate coils available worldwide for Toyota and Lexus SUV’s
- These are not for you if you don’t have at least 1000LBS of rear constant weight bolted to the back end of your SUV at all times!!!
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal Color ONLY
- Sold in Pairs
- Important: Read first line below in description before proceeding!!!
- 500mm free height, 19mm wire, variable rate 314-371 LBF/in at ride height/loaded
$405.00 Add to cart -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-545 3″ HD Land Cruiser 200 Series Rear Coils
- C59-545 – 4″ lift with stock weight, 3″ lift with 220 LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.Â
- Sold as a Pair – marked side specific for installation
$305.00 Select options -
KL Cherokee 2014-2022 (Trailhawk)
Dobinsons C29-151 Rear Lifted Coils for 4X4 Jeep Cherokee KL 2014 to 2022
- Trailhawk (AD2) lifts 1.0″ rear. Sport (AD1) models lift 2″ rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powder coated in a long lasting black color
$270.00 Add to cart -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-547 2″ VHD Land Cruiser 200 Series Rear Coils
- C59-547 – 2″ lift with 880LBS constant rear weight, 2.5″ with 550LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.Â
- Sold as a Pair – marked side specific for installation
$305.00 Select options