Your cart is currently empty!
Suspension
Showing 1321–1350 of 1481 resultsSorted by popularity
-
Shocks + Struts - Sequoia 3rd GenFREE SHIPPING
within 48 US StatesDobinsons 3.0-4.0″ MRR 3-Way Adjustable Toyota Sequoia Coilovers | 2023-2025+
- Suits Toyota Sequoia 2023-2025+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- Sold as a Pair, ready to bolt in
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 will be set at 175mm (6.87″) from the strut bushing eye
- Photos for illustration purposes
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 4″ lift in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Front Installation Instructions
- Link to Matching rear shocks
- A Diff Drop Kit should be run with 4″ of lift
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(7 reviews) -
Shocks + Struts - Sequoia 3rd GenFREE SHIPPING
within 48 US StatesDobinsons 3.0-4.0″ Assembled IMS Coilovers | Toyota Sequoia 2023-2025+
- Suits Toyota Sequoia 2023-2025+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a threaded body with adjustable collar
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Sequoia IMS coilovers use a slightly different top mount
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 4″ lift in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Link to Matching rear shocks
- A Diff Drop Kit should be run with 4″ of lift
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
- Note: If you’re looking for less lift height, you can buy these IMS Struts only and use them with your OEM coils and add preload to add lift height
(3 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2851 Front Coil Springs | Toyota Land Cruiser 80 + 105 Series – Pair
- OME Part Number 2851
- Bar Size : 16 mm
- Free Height : 475/485 mm
- Number of Turns : 8.18
- Coil Weight (each): 5.3 Kg | 11.7 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
(22 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2862 Rear Coil Springs | Toyota Land Cruiser 80 + 100 Series – Pair
- OME Part Number 2862
- Bar Size : 17 mm
- Free Height : 460/470 mm
- Number of Turns : 9.0
- Coil Weight (each): 7.8 Kg | 17.2 lbs
- Spring Rate : 170-260 lbs
- Variable Rate Springs
- Sold in Pairs
(21 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2860 Rear Coil Springs | Toyota Land Cruiser 80 + 100 Series – Pair
- OME Part Number 2860
- Bar Size : 17 mm
- Free Height : 480/490mm
- Number of Turns : 6.88
- Coil Weight (each): 6 Kg | 13.2 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
(26 reviews) -
Full Suspension Kits - XterraFREE SHIPPING
within 48 US StatesDobinsons 1.5″ Lift MRR 3-Way Adjustable Coilovers | Nissan Xterra 2005+
- Remote Resi Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 1.5″
- Looking for a quick and easy way to lift your Xterra? This is your answer
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Dobinsons MRR are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 395mm extended, 266mm compressed
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(2 reviews) -
Teraflex
Teraflex JL JT Front Track Bar Axle Bracket Kit (2.5–3.5” Lift) | Wrangler JL Gladiator JT
- Suits Jeep Wrangler JL and Gladiator JT
- The TeraFlex JL/JT: Front Track Bar Axle Bracket Kit corrects vehicle roll center
- Corrects steering geometry eliminating bump steer and other front-end issues
- Restores factory handling
- Reduces body roll on lifted JL Wrangler/Unlimited and Gladiator models
- Bolt-on bracket mounts to the front axle
- Drilling is required
- Installation Instructions
(9 reviews) -
Teraflex
Teraflex JL: Rear Track Bar Axle Bracket Kit (2.5–4.5” Lift) | Jeep Wrangler JL
- The TeraFlex JL: Rear Track Bar Axle Bracket Kit corrects vehicle roll center
- Restores factory handling
- Reduces body roll on lifted JL Wrangler/Unlimited models
- Multiple mounting locations allows neutral lateral alignment of the rear axle on JL models with 2.5–4.5” lifts
- Bolt-on bracket mounts to the rear axle
- Drilling is required
- Installation Instructions
(9 reviews) -
Bump Stops + Spacers
Teraflex JL: Progressive Bump Stop Kit – Front & Rear (0-4.5″ Lift) | Jeep Wrangler JL
- JL specific tuned for high-speed performance
- Foam Progressive Bump Stops simply pop-in to the existing factory locations
- Replaces factory foam bump stops
- Performance-tuned closed-cell nitrogen charged microcellular polyurethane technology
- Absorbs large impact energy progressively during compression to prevent bent axle tubes
- Prevents damage to suspension components, shock absorbers, and fenders
- Quiet movement and function (no pad-slap clunk)
- Maintains progressive nature during all conditions
- Will not fade or dissipate under extended heavy use
- Unaffected by temperature extremes – retains flexibility in thermal or subzero temps
- Resistant to all types of environmental conditions (mud, salt, sand, dust, etc.)
- Subzero temperature flexibility reduces fatigue
- Compatible w/ all suspension systems that retain factory axle spring mounting locations
- Maintenance-free, all composite construction
- Simple bolt-on installation
- Patented technology
- Limited lifetime warranty
- Installation Instructions
(9 reviews) -
Airbag KitsFREE SHIPPING
within 48 US StatesToyota Tacoma Firestone 2407 Airbag Kit | 2005-2023
- Suits 2005-2023 Toyota Tacoma 4×4 Trucks
- Intended for stock height leaf springs and shocks
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Jimny (2018+)FREE SHIPPING
within 48 US StatesDobinsons Suzuki Jimny IMS Suspension Kit | 2018+ 2-Door
- Suits 2-Door 2018-2025 Suzuki Jimny GJ – 40mm lift front and rear
- The 4-Door version uses different coils
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Monotube Shocks, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
(8 reviews) -
Dobinsons
Dobinsons ±2 ½ – 3° Caster Bushing Kit for Suzuki Jimny
- Suits Suzuki Jimny 1998-2017 and 2018+
- High quality rubber, producing the highest ride quality
- Adjustable during installation to offer ±2 ½ – 3° of caster adjustment
- Replaces OE bushes holding front and radius arms to the axle
- Order 2 for 1 vehicle to change it all
- Raising Vehicle Will Effect Wheel Alignment. It is Recommended that this Castor Adjustment Kit to be Fitted and a Wheel Alignment Carried Out.
- Installation Instructions
(3 reviews) -
Jimny (2018+)
Dobinsons C57-143 Rear Coils | Jimny 2018+ 40mm Lift – Pair
- Suits Suzuki Jimny 2018+ 40mm Lift with stock rear end weight up to 60KG added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
Jimny (2018+)
Dobinsons C57-071 Rear Coils | Jimny 2018+ 40mm Lift HD – Pair
- Suits Suzuki Jimny 2018+ 40mm Lift with 100-200KG of added rear end weight (bumper, rooftop tent, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(12 reviews) -
Jimny (2018+)
Dobinsons C57-110 Front Coils | Jimny 2018+ 40mm Lift HD – Pair
- Suits Suzuki Jimny 2018+ 40mm Lift with 40-70KG of added front end weight (bumper, winch, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(13 reviews) -
Jimny (2018+)
Dobinsons C57-142 Front Coils | Jimny 2018+ 40mm Lift – Pair
- Suits Suzuki Jimny 2018+ 40mm Lift with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(12 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS57-50618 2.2″ IMS Shocks Pair | Suzuki Jimny Rear Shocks
- Suits Suzuki Jimny 1998-2017 and 2018+
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS57-50617 2.2″ IMS Shocks Pair | Suzuki Jimny Front Shocks
- Suits Suzuki Jimny 1998-2017 and 2018+
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Full Suspension Kits - Bronco 2021+FREE SHIPPING
within 48 US StatesDobinsons IMS Ford Bronco Suspension Kit 2 DOOR
- Suits 2 DOOR Ford Bronco 2021-2025+ Models (will not fit Bronco Sport)
- Complete suspension kit with multiple coil spring options to suit the vehicle as well as the added weight
- (The 4 Door Suspension Kit is on a different page)
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Front Springs Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models.
- Rear Springs Provide Approximately 3″ Lift Above Non Sasquatch Models & 2″ Lift Above Sasquatch Models.
- Dobinsons IMS shocks and struts are fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″) front and rear. See instructions on setting coil seat height on left
- Reuse OE strut top mounts
- Select the coil springs that match the Bronco version you have as well as the added weight you have put on it, if any
(8 reviews) -
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-563V – Pair
- Dobinsons C19-563V Variable Rate Springs Suits Ford Bronco:
- 2 Door – BL, Wildtrack, First Edition – with 0-110lbs load
- 4 Door – Base, Big Bend, Black Diamond, Outer Banks – with 0-110lbs load
- These Coil Springs were made for Dobinsons IMS19-50099 but have been known to fit Bilstein Sasquatch shocks
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(15 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-561V – Pair
- Dobinsons C19-561V Variable Rate Springs Suits Ford Bronco:
- 2 Door – Base, Big Bend, Black Diamond, Outer Banks – with 0-110lbs load
- These Coil Springs were made for Dobinsons IMS19-50099 but have been known to fit Bilstein Sasquatch shocks
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(19 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bronco (2021-2025+)
Dobinsons Ford Bronco Front Coils | C19-560 – Pair
- C19-560 Suits Ford Bronco: 2 Door – Base, Big Bend, Black Diamond, Outer Banks WITH 2.3L – Stock Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50098
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(14 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons HJ45-8L-F Front Leaf Springs Pair for FJ/BJ45 up to 1979
- Front Leaf Springs for the Toyota FJ/BJ45 up to 1979 with 25mm eyes
- 45mm front lift with 110-180LBS front end weight on an FJ45/BJ45
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
(2 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | Toyota FJ Cruiser 2007-2016
- Suits 2006-2014 Toyota FJ Cruiser
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORSEQ replaces the rear OEM bump stops and ABSTOF replaces the fronts on the FJ Cruiser. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(15 reviews) -
Brake Lines + Bump Stops - 4th Gen 4runnerFREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | 4th Gen Toyota 4Runner 2003-2009
- Suits 2003-2009 Toyota 4th Gen 4Runner
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORSEQ replaces the rear OEM bump stops and ABSTOF replaces the fronts on the 4th Gen 4Runner. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(15 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR 0-2.5″ Toyota Sequoia Lift Kit | 2001-2007
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
- Additional optional parts can be added from the drop down menus
(6 reviews) -
Late FJ Cruiser (2010-2016)FREE SHIPPING
within 48 US StatesDobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews) -
Late FJ Cruiser (2010-2016)FREE SHIPPING
within 48 US StatesDobinsons 1.5-2.5″ Pre-Assembled IMS Coilovers | Toyota FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 560mm extended, 420mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews)
