Control Arms - 200 Series
Showing all 14 resultsSorted by popularity
-
DobinsonsDobinsons UCA Ball Joint for 4Runner FJ Cruiser GX470 GX460 LC200
- Suits Dobinsons UCA’s that fit Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460, Prado 120 and 150, Land Cruiser 100 and 200 Series
- This ball joint will fit UCA part numbers UCA59-001K, UCA59-002K, UCA59-006K, UCA59-201K, UCA59-202K, UCA59-206K
- Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Sold individually
- Includes new ball joint, boot, split pin and nut (subject to design changes)
(6 reviews) -
200 Series Land Cruiser (2008-2021)THIS SHIPS FREE
within 48 US StatesDobinsons Tubular UCA Pair | Toyota Land Cruiser 200 Series + Lexus LX570 2008-21
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Replacement Ball Joints can be ordered here
(8 reviews) -
200 Series Land Cruiser (2008-2021)Dobinsons Rear Adjustable Panhard Rod | Land Cruiser 200 250 300 GX550 4Runner
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series 2008-2021
- Toyota Tundra 2022+
- Toyota Sequoia 2023+
- Toyota Land Cruiser 300 Series 2022+
- Toyota Land Cruiser 250 Series 2024+
- Lexus GX550 2024+
- Lexus LX600 2022+
- Toyota 4Runner 2025+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed – this is a safety feature, so that the length can’t change if the lock nut gets loose
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(15 reviews) - Suits the following vehicles:
-
200 Series Land Cruiser (2008-2021)Dobinsons Adjustable Rear Lower Trailing Arms Pair | Toyota + Lexus
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series, Lexus GX550 and 2025+ 4Runner
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Sale!
SPCSPC 25465 | UCA’s for Toyota Land Cruiser 200 Series & LX570 2008-2021 Pair CLEARANCE
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- THIS ITEM IS ON CLEARANCE AND CAN’T BE RETURNED
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
(10 reviews) -
DobinsonsDobinsons UCA Ball Joint Cap Cover for Tubular UCA’s
- Suits all Dobinsons Tubular UCA’s
- Fits the Tubular UCA’s made for Tacoma, 4Runner, GX470, GX460, LC100, LC200, Ranger, Hilux, Fortuner
- Machined ball joint cap with o-ring to seal the top of a ball joint
- Black with Dobinsons logo engraved in it
- Does not suit the billet aluminum UCA’s
- Sold individually
(6 reviews) -
200 Series Land Cruiser (2008-2021)Dobinsons Adjustable Rear Upper Trailing Arms Pair | Land Cruiser 200 Series LX570
- Suits Toyota Land Cruiser 200 Series (2008-2021) and Lexus LX570 (2008-2021)
- Fully adjustable to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(4 reviews) -
200 Series Land Cruiser (2008-2021)THIS SHIPS FREE
within 48 US StatesDobinsons Billet Adjustable Rear Lower Trailing Arms Pair | Toyota + Lexus
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series, Lexus GX550, and 2025+ 4Runner
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from billet aluminum for maximum strength and fantastic looks
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Toyota Sequoia’s need 5mm spacers to offset the mount thickness. Tell us during checkout if you have a Sequoia so that we add the spacers in with the arms.
- Sold as a pair
(0 reviews) -
Upper Control ArmsSPC 35102 Replacement Ball Joint Set for 25455 25465 25480 25490
- Replaces Ball Joints on SPC Arms – 25455, 25465, 25480, 25490
- Will not work on OEM or any other brand aftermarket upper control arms (UCA’s)
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Suits 2003-2024 Toyota 4Runner, 2006-2017 Toyota FJ Cruiser, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, Prado 120 and 150
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- Suits 1998-2007 Toyota Landcruiser 100 Series and 1998-2007 Lexus LX470
- Sold in Pairs
- Fully seated boot to keep grease in and contaminants out for a maintenance-free joint
- High strength steel forging with offsets provides camber & caster adjustability
- One piece polymer race tests like OE and provides low & smooth turning torque
- Oversized ball generates 80˚ of articulation with a 25% increase in neck cross section vs. OE for added strength
- Modern grease formula ensures quiet and smooth operation with reduced wear for extended life
- Extended threads on ball stud will work with most popular spindle gusset kits
- These ball joints are reverse compatible and a direct replacement for the SPC upper control arm sets
- Installation Instructions
(9 reviews) -
Upper Control ArmsTHIS SHIPS FREE
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | Toyota 200 Series Land Cruiser 2008-2021
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
- Photos for illustration purposes
(8 reviews) -
Control Arms - 200 SeriesTHIS SHIPS FREE
within 48 US StatesOME Upper Control Arms Pair – 200 Series Toyota Land Cruiser 2008-2021
- Suits Land Cruiser 200 Series and Lexus LX570 2008-2021
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joints
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- 3 Year Manufacturers Warranty
- Made in Vietnam
(13 reviews) -
200 Series Land Cruiser (2008-2021)THIS SHIPS FREE
within 48 US StatesIcon Tubular Lower Trailing Arm Pair | 4Runner FJ Cruiser GX470 GX460 LC200
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021, Prado 120 and 150
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- Offset lower link front pivots improve roll steer
- Tangent lower link barrel design reduces risk of off-road hangups
- Integrated OEM emergency brake bracket mount
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON’s lifetime warranty
- Sold as a Pair
- Installation Guide
- Warranty Info
(7 reviews) -
200 Series Land Cruiser (2008-2021)THIS SHIPS FREE
within 48 US StatesIcon Billet Lower Trailing Arm Pair | 4Runner FJ Cruiser GX470 GX460 LC200
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Prado 120 and 150, Lexus LX570 and 200 Series 2008-2021
- On vehicle length adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon ROCK Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Greaseable, multi-piece polyurethane bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Sold as a Pair
- Installation Guide
- Warranty Info
(7 reviews) -
Control Arms - 200 SeriesTHIS SHIPS FREE
within 48 US StatesIcon Billet UCA DJ Pair for 2008-2021 Toyota Land Cruiser 200 Series
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Features patented ICON Delta Joint (U.S. Pat. 10,731,700)
- CNC Machined 6061 Billet Aluminum Construction
- High-Quality PTFE-lined ¾” FK Rod Ends
- On-Vehicle Adjustable For Quick And Precise Alignment
- Caster and Camber Adjustability Allows For Fine Tuning Of Vehicle Handling
- Matte Anodized Finish Provides Exceptional Corrosion Resistance
- O-ring Sealed Delta Joint Cover Cap For Additional Protection From The Elements
- Installation Guide
- Warranty Info
(11 reviews)
