Bump Stops - LC250
Showing all 7 resultsSorted by popularity
-
TimbrenTHIS SHIPS FREE
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2026 Tundra, 2001-2026 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series, Lexus LX470 and LX570, 2024+ Land Cruiser 250 and Lexus GX550
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95, Prado 120 and 150
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
Bump Stops + SpacersWheeler’s Front Superbump Set for Toyota & Lexus Trucks & SUV’s
- Suits the following vehicles: 2005-2023 Tacoma, 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460, Prado 120, Prado 150, 2007-2021 Tundra, 2022-2026+ Tundra, 2008-2026+ Sequoia, 2024+ Land Cruiser 250 Series
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
(8 reviews) -
Bump Stops + SpacersTHIS SHIPS FREE
within 48 US StatesDobinsons Front Adjustable Height Bump Stop Pair | Toyota + Lexus IFS
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, Prado 120/150, GX550, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
Bump Stops + SpacersTHIS SHIPS FREE
within 48 US StatesTimbren Active Off Road Rear Bump Stops | Tundra Sequoia LC250 Tacoma GX 4Runner
- Suits the Rear of 2025+ Toyota 4Runner, 2022-2026+ Toyota Tundra, 2023-2026+ Sequoia, 2024-2026+ Land Cruiser 250, Lexus GX550, 2024-2026+ Tacoma with coil springs
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops on the 2022 Toyota Tundra. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(15 reviews) -
Bump Stops - Tundra 2022+THIS SHIPS FREE
within 48 US StatesTimbren Bump Stops Front & Rear | Toyota Tundra Sequoia LC250 Lexus GX550
- Suits the 2022-2026+ Toyota Tundra, 2023-2026+ Sequoia, 2024-2026+ Land Cruiser 250, Lexus GX550
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bump stops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops and ABSTOF replaces the fronts
- Upgrade to Active Off-road Bump stops and experience the difference
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(12 reviews) -
ExceptionsTHIS SHIPS FREE
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | LC 200 250 300 Sequoia GX550 4Runner
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the rear of the following vehicles:
- Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021
- 2022+ Land Cruiser 300 Series
- 2024+ Land Cruiser 250 Series, Lexus GX550
- 2023+ Toyota Sequoia
- 2025+ Toyota 4Runner
- This hydraulic bump stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection
- The Dobinsons Rear Adjustable Hydro Bumps Stop kit also retains the original external bump stop on the frame, and the kit comes with spacer blocks to lower the original bump stop down to meet the same bottom-out level as the new hydraulic bumps
- You can replace the original frame-mounted bump stop with an aftermarket one if you’d like
- This hydro bumps stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection, in addition to setting the bump stop gap for long travel shocks, increased tire clearance, or whatever else you may need to restrict or free up the amount of bump stop gap that your vehicle has
- The adjustable hydro bumps can easily spin on their threaded body to raise up or down in the mounts provided so that you can tune in the height quite easily
- You’ll possibly have to take the coil out of the way to get in there and accurately set and adjust the height
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-013FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews) -
DobinsonsDobinsons Rear Adjustable Hydro Bump Stop Fitting Kit | LC 200 250 300 Sequoia GX550 4Runner
- Hydro bump stop FITTING KIT ONLY to replace the factory coil isolator and internal bump stop
- If you want to buy a complete kit with this mounting kit and bump stops, go to This Page
- This hydraulic bump stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection
- The Dobinsons Rear Adjustable Hydro Bumps Stop kit also retains the original external bump stop on the frame, and the kit comes with spacer blocks to lower the original bump stop down to meet the same bottom-out level as the new hydraulic bumps
- You can replace the original frame-mounted bump stop with an aftermarket one if you’d like
- This hydro bumps stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection, in addition to setting the bump stop gap for long travel shocks, increased tire clearance, or whatever else you may need to restrict or free up the amount of bump stop gap that your vehicle has
- The adjustable hydro bumps can easily spin on their threaded body to raise up or down in the mounts provided so that you can tune in the height quite easily
- You’ll possibly have to take the coil out of the way to get in there and accurately set and adjust the height
- Suits the rear of the following vehicles:
- Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021
- 2022+ Land Cruiser 300 Series
- 2024+ Land Cruiser 250 Series, Lexus GX550
- 2023+ Toyota Sequoia
- 2025+ Toyota 4Runner
- Use with Dobinsons HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(0 reviews)
