Your cart is currently empty!
Shocks + Struts - LC250
Showing all 6 results
-
Sequoia 3rd Gen (2023-2024+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60441 2.6″ IFP Rear Shocks Pair
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on rear shocks
- Full 2 year limited warranty, no set rebuild time period
(17 reviews) -
Sequoia 3rd Gen (2023-2024+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A441 2.6″ 3-Way Adjustable Rear Shocks Pair
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(15 reviews) -
250 Series Land Cruiser (2024+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A660 3-Way Adjustable Front Struts Pair | Land Cruiser 250
- Suits 2024+ Toyota Land Cruiser 250 Series
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Photos for illustration purposes only
(0 reviews) -
250 Series Land Cruiser (2024+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60660 2.6″ IFP Front Struts Pair | 2024+ Land Cruiser 250
- Suits Toyota Land Cruiser 250 Series 2024+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 237mm (9.3″) from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- Shocks do not suit any models that have factory electronic adjustable Shock Absorbers
- Photos for illustration purposes only
(0 reviews) -
300 Series Land Cruiser (2021+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A440 3-Way Adjustable Front Struts Pair | LC250 LC300 LX600
- Suits 2022+ Toyota Land Cruiser 300 Series (not sold in the USA) and Lexus LX600, and is an Extended Travel option for 2024+ Land Cruiser 250 Series
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A440 should be set at 237mm (9.3″) from the strut bushing eye
- Photos for illustration purposes only
- Installation Instructions
- Note: If installed on a Toyota Land Cruiser 250 Series, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
(0 reviews) -
300 Series Land Cruiser (2021+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60440 2.6″ IFP Front Struts Pair | LC250 LC300
- Suits Toyota Land Cruiser 300 Series 2021+ (not sold in the USA), and is an Extended Travel Option for 2024+ Toyota Land Cruiser 250 Series for 2-3″ of lift
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- 624mm extended, 453mm compressed
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Note: If installed on a Toyota Land Cruiser 250 Series, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
(8 reviews)
