Your cart is currently empty!
Brake Lines + Bump Stops - 80 Series
Showing all 9 resultsSorted by popularity
-
Brake LinesFREE SHIPPING
within 48 US States80 Series Extended Brake Line Kit for 1993-1997 w/ABS up to 6″ lift
- Suits 1993 to 1997 80 Series Land Cruisers and 1993 to 1997 Lexus LX450 with ABS Brakes
- Extended brake line kit to suit lift heights of up to 6″
- Extruded PTFE (Teflon) Hose with Braided Stainless Steel Cover and Clear PVC Outer Jacket
- Permanently Crimped Zinc-Plated Fittings
- Includes 2 front and 1 rear extended brake line
- Includes Retention Clips
- Meets DOT MVSS-106
- Always compare stock brake lines and fittings to the new ones before disconnecting the old lines
- Instructions
(9 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesTimbren ABSTOFLC1A Active Off Road Toyota 80 Series Front Bump Stops
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- 1″ Extended Bump Stop over stock
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Front End
- NOTE: Some early model 80 Series didn’t come with the threaded holes in place in the frame. Adding nutserts may be required.
- Click here for instructions
(13 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesTimbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
(11 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Front Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
- Complete Front hydro bump stop kit to replace the factory coil isolator and internal bump stops
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-012FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
(9 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-019FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews) -
Brake LinesFREE SHIPPING
within 48 US States80 Series Extended Brake Line Kit for 1991-1992 ONLY – for 0-4″ lift
- Suits 1991 to 1992 80 Series Land Cruisers ONLY
- Extended brake line kit to suit lift heights of up to 4″ of lift ONLY
- Extruded PTFE (Teflon) Hose with Braided Stainless Steel Cover and Clear PVC Outer Jacket
- Permanently Crimped Zinc-Plated Fittings
- Includes 1 front and 1 rear extended brake line
- Includes Retention Clips
- Meets DOT MVSS-106
- Always compare stock brake lines and fittings to the new ones before disconnecting the old lines
- Instructions
(35 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | Land Cruiser 80 Series
- Suits 1990-1997 Land Cruiser 80 Series and Lexus LX450
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC1 replaces the rear OEM bump stops and ABSTOFLC1A replaces the fronts on the Land Cruiser 80 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Clearancing of the rear brackets and the bump stop cups may be required on some long travel setups to avoid clearance issues with the coil springs
- Front Instructions and Rear Instructions
(11 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Front Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the Front of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the inner bump stop
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
- Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
- Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
- Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
(2 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the rear of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the axle end
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
- Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
- Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
- Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
(2 reviews)
