Your cart is currently empty!
Control Arms - 80 Series
Showing all 12 results
-
80 Series Land Cruiser (1990-1997)Dobinsons Front Adjustable Panhard Rod | Land Cruiser 80 Series LHD
- Suits Land Cruiser 80 Series and Lexus LX450
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- For left hand drive models
(8 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(7 reviews) -
80 Series Land Cruiser (1990-1997)Dobinsons Adjustable Rear Lower Control Arms Pair | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
(4 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons WA59-545K Adjustable Rear Upper Control Arms Pair | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm (1.57″) OD and 6mm (0.236″) wall thickness
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
(4 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Rear Sway Bar Extensions | Land Cruiser 70 80 Series Bottom Chassis Mount
- Suits Toyota Land Cruiser 78, 79, 80 Series and Lexus LX450
- For 2″ to 5″ lift heights
- Zinc plated steel with all hardware supplied
- Simple bolt-on design
- Sold as a pair, enough for 1 vehicle
- Bolts to the bottom of the frame, not the side like some earlier models
- Check your mounting position before ordering!!
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Rubber 2.5° Caster Bushing Kit for Land Cruiser
- Suits Land Cruiser 80 Series and Lexus LX450 and some 70 Series
- For 0″ to 3″ lift heights
- High quality rubber, producing the highest ride quality
- Adjustable during installation to offer 0 to 2.5° of caster adjustment
- Replaces OE bushes holding front radius arms to the axle
- Also available in Polyurethane, part PB59-503K
(11 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Rear Sway Bar Extension Kit | Toyota Land Cruiser 70 80 Series Side Chassis Mount
- Suits Toyota Land Cruiser 78, 79, 80 Series and Lexus LX450
- For 2″ to 5″ lift heights
- Zinc plated steel with all hardware supplied
- Simple bolt-on design
- Sold as a pair, enough for 1 vehicle
- For side-frame mounted brackets only
- Verify your rear sway bar is attached to the side of the frame before ordering (the other option is under the frame)
(6 reviews) -
Control Arms - 80 Series
Dobinsons 80 Series Upper and Lower Rear Trailing Arms bundle
- Suits all 80 Series Land Cruisers and Lexus LX450 from 1990 to 1997
- Bundle of both the upper and lower rear adjustable control arms
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
(0 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Rubber Bushings, Radius Arm to Chassis (Fixed End) for Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- For any lift height, or no lift. These are OE replacement bushings.
- High quality rubber, producing the highest ride quality
- Pressing of bushings is required during installation
- Replaces OE bushings holding front radius arms to the frame
(0 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Adjustable Front Poly Caster Bushing Kit 0° 2.5° 3.5° | Land Cruiser
- Suits Land Cruiser 80 Series and Lexus LX450
- For 0″ to 4″ of lift, Recommended when replacing 20+ year old suspension parts
- Contains all 4 bushings for the front of the radius arm to axle
- Can be set to 3 different caster settings quite easily
- The inner core can be slid out and rotated to go to the next caster setting without requiring a press
- This kit is a must for any lifted Landcruiser so that the steering control is correct giving you the best ride quality possible
- Dobinsons offer other separate bush kits for Caster and Radius Arms. Contact us for more information
- Installation Instructions
(10 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Axle-End Radius Arms Bushings Kit, OE Rubber Replacement Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- For any lift height, or no lift. These are OE replacement rubber bushings.
- High quality rubber, producing the highest ride quality
- Pressing of bushings is required during installation
- Replaces OE bushings holding front radius arms to the axle in all 4 positions
(8 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Adjustable Panhard Rod | 80 Series Right Hand Drive
- FOR RIGHT HAND DRIVE MODELS ONLY (Japanese import, etc.)
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Image for illustration purposes only
(5 reviews)
