Your cart is currently empty!
Land Cruiser
Showing 331–360 of 442 resultsSorted by popularity
-
40 Series Land Cruiser Early (1960-1979)Dobinsons HJ45-7L-F Front Leaf Springs Pair for FJ/BJ40 FJ/BJ45 up to 1979
- Front Leaf Springs for the Toyota FJ/BJ40 and FJ/BJ45 up to 1979 with 25mm eyes
- 45mm front lift with 400LBS constant weight on an FJ40/BJ40
- 45mm front lift with stock front end weight on an FJ45/BJ45
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
(5 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square HeadlightsFREE SHIPPING
within 48 US StatesDobinsons 2.5″ IMS Lift Kit Toyota Land Cruiser 1/90-5/93 LJ70/72/73/77 | 1994+ RJ70/73 KZJ 70/71/73/78
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement shocks for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Shocks are Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and IMS shocks. Add other parts below
(9 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Toyota Land Cruiser 100 Series 1998-2004 Long Range Auxiliary Fuel Tank (40gal)
- Suits Lexus LX470 and Toyota Land Cruiser 100 Series 1998-2004 with the any engine option, gas or diesel
- This is an additional tank that goes where the factory spare tire sat, it holds 40 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 40 gallon capacity, fits where OE spare tire sat (requires spare tire relocation)
- 40 gallons plus your original 25 gallon tank gives you a capacity of 65 gallons in total, or you can also add the LRA replacement tank which is 40 instead of 25 gallons, bringing total capacity up to 80 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- 24 gallon tank is built the same as the 40gal, but with better clearance and departure angle (hangs down less) – Click here to see that tank
- Part Number TLC100AX-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Toyota Land Cruiser 80 Series 1991-1997 Long Range Replacement Fuel Tank (1FZ Gas)
- Suits Toyota Landcruiser 80 Series 1991-1997 and Lexus LX450 with the 1FZ Gas Engine
- For US-spec 80 series with a single original tank (not dual tanks)
- Replacement tank – 37 gallon capacity replaces original 25 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Part Number TLC80FR-PA-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
60 62 Series Land Cruiser (1980-1989)
Toyota Land Cruiser 62 Series 1988-90 Long Range Replacement Fuel Tank (EFI USA Spec)
- Suits Toyota Landcruiser 62 Series Wagons 1988-1990 with EFI engine
- Replacement tank – 40 gallon capacity replaces original 23.8 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 3 hours
- Part Number TLC602RE
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
55 Series (1970-80)
Dobinsons 1.75″ Suspension Kit for Toyota Land Cruiser FJ55 1970-1980
- Full 1.75″ suspension for Toyota Land Cruiser Wagon FJ55 models, from 1970 to 1980
- All parts are also available separately, HERE
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Hand made leaf springs, built in Queensland, Australia
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add the home delivery fee below. We will be in touch with that delivery address
(3 reviews) -
Front Bumpers
Dobinsons 100 Series Front Bumper | Land Cruiser 100 Series IFS 1998 to 2007
- Suits all year models of Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. Removable Top Tubes
- Supplied Black, but can be painted by your paint shop. Suits 10000 – 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Rear Bumpers
Dobinsons Toyota 70 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 and 78 Series Land Cruiser Wagons pre-2007 – 5 Door Models
- Will not suit any Prado variant 70x series without modifications
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- ***Does not include Hi-Lift Jack carrier as shown in photos***
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(15 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons 4×4 Snorkel Kit | Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985-07 3.4L/4.0L
- Dobinsons SN59-3374 Suits 4.0L Diesel, 4.0L Petrol, 3.4L Diesel
- 1985 to 2007 (Narrow Front) 70 Series Toyota Land Cruisers, including the 70, 71, 73, 74, 75, 78, and 79 Series variant
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
(8 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons SS59A825 Adjustable Monotube Steering Damper | Land Cruiser
- Suits Land Cruisers, Series 71. 76. 78 and 79 series from 2007-2023 (see list below)
- 56mm Extruded and CNC machined 6061-T6 hard anodized aluminum body
- Hard-anodized and clear coated for a durable finish.
- External reservoir design separates oil and high-pressure nitrogen gas
- Black-anodized, CNC machined 6061-T6 billet aluminum Components
- 5/8” hard chrome plated heat treated alloy steel Shaft
- 50mm high-flow 6061-T6 CNC machined Piston
- Natural rubber OEM style bushings
- Direct replacement for stock and after-market lifts kits
- 12 stage adjustment range
- Photos are for illustration purposes only
(6 reviews) -
Dobinsons
Dobinsons C59-175V Rear Coil Springs Pair | Land Cruiser
- Dobinsons C59-175V suit the following vehicles and give the specified amount of lift:
- Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997 2.0″ lift with up to 660LBS, or 3″ lift with up to 330LBS
- Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 2.5″ lift with up to 220lbs constant Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(3 reviews) - Dobinsons C59-175V suit the following vehicles and give the specified amount of lift:
-
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons Billet Adjustable Rear Lower Control Arms Pair | WA59-747K
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series, Lexus GX550
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from billet aluminum for maximum strength and fantastic looks
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Sold as a pair
(0 reviews) -
Roof Racks
RCI Toyota Land Cruiser 250 Aluminum Roof Rack | 2024+
- Suits 2024+ Toyota Land Cruiser 250 and Toyota Land Cruiser Prado 250
- Versatile Mounting Options: Mount a wide range of accessories on your vehicle, including lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, Quick Fist mounts, RotoPax, spare tires, bike mounts, roof baskets, and more.
- Heavy Duty Design: Engineered to support heavy gear, including roof top tents, ensuring long-lasting durability and strength.
- Premium Build Materials: Constructed with 1/4″ 5052 aluminum laser-cut side panels and rear fairing, 1″ x 2″ black anodized aluminum T-slot crossbars, and a 1/8″ 5052 aluminum front fairing for added strength and stability.
- CNC Deburring Process: All aluminum components undergo a CNC deburring process to eliminate sharp edges, providing a high-end, clean finish.
- Simplified Accessory Installation: T-Slot crossbars are machined to accept nut plates and carriage bolts, making it easy to install accessories without removing the bars.
- Superior Aerodynamics & Fit: Front wind fairing matches the roof and windshield contour, offering a superior fit, finish, and improved aerodynamics.
- Complete Installation Kit: Includes rubber trim and all necessary hardware for a quick and hassle-free installation process.
- Innovative Mounting System: Features injection-molded rubber mounting blocks that lift and cushion the roof rack feet, completely sealing out moisture without the need for silicone.
- Unlimited Accessory Options: Built-in side panel slots provide endless options for adding accessories like handles, side lighting, awning mounts, and more.
- Easy, Bolt-On Design: The rack uses existing roof rack mounting holes, with no need to remove or alter your roof antenna.
- Low-Profile Design: Rack sits only 1.75″ above the highest point of your truck (excluding the antenna), providing a sleek, aerodynamic look.
- Industry-Standard Compatibility: T-slot crossbars are compatible with hundreds of accessories, enhancing the versatility of your rack.
- Durable Powder Coat Finish: Finished with a heavy-duty black textured powder coat and an additional epoxy primer for an ultra-durable, long-lasting finish.
- Premium Hardware: Includes black stainless steel hardware and trim, at no extra charge, to ensure a secure and stylish installation.
- Easy Assembly: Simple bolt-together assembly takes about 45 minutes, with all hardware and instructions provided.
- Lightweight & Strong: Weighs approximately 39 lbs, balancing durability with a manageable weight for easy installation and use.
- Allow 1-6 weeks production/build time
- Installation Guide
(0 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons 1.75″ IMS Suspension Kit | Toyota Land Cruiser FJ40 BJ40 1960-1979
- Suits Land Cruiser 40 series 1960 to 1979 models with 25mm eye leaf springs
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- IMS Shock Features:
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos are for illustration purposes
(5 reviews) -
Add-a-Leaf
Dobinsons Add-A-Leaf Kit for TOY-034-R Pack (2 leafs + 2 pins)
- For early model Toyota Land Cruiser FJ40 up to 1979 models with 25mm eye springs
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts TOY-034-R to L59-029-R heavier load springs
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Kit Includes
- TOY-029-R-R3 Add A Leaf
- 10-60 Center Pins
- This becomes the 3rd leaf down from the top in the pack once added
(3 reviews) -
Performance Upgrades - 200 SeriesFREE SHIPPING
within 48 US StatesPowerbrake D-Line Front & Rear Brake Upgrade Kit | 200 Series 2008-2015
- Suits Toyota Land Cruiser 200 Series 2008-2015 and Lexus LX570 2008-2015
- Maximize your vehicle’s braking potential
- Includes both the Front and Rear D-Line rotor and pad kits to replace the whole brake system at the same time
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(3 reviews) -
Performance Upgrades - 200 SeriesFREE SHIPPING
within 48 US StatesPowerbrake D-Line Front & Rear Brake Upgrade Kit | 200 Series 2016-2021
- Suits Toyota Land Cruiser 200 Series 2016-2021 and Lexus LX570 2016-2021
- Maximize your vehicle’s braking potential
- Includes both the Front and Rear D-Line rotor and pad kits to replace the whole brake system at the same time
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(8 reviews) -
Sale!250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesLongfield IFS CV Axle Set | Toyota Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 Series and Prado 250
- Standard/Stock length for use on lifted and non-lifted applications
- 35-spline CV joint stars & axle shafts.
- Stock replacement length for Land Cruiser LC250 vehicles.
- Set of (1) long side & (1) short side IFS Axle Assembly
- CV joints housings are 100% SAE 4340 chromoly steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 chromoly steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-resistant 52100 alloy steel bearing balls.
- All components precision polished to remove imperfections and prevent stress risers.
- CV joints black oxide & powder-coat finish for corrosion resistance.
- CV joints are pre-lubricated with racing-grade Red Line CV-2 moly grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(0 reviews) -
Sale!All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Outer CV Boot Kit | 07-21 Tundra | 98-21 Land Cruiser | 08-22 Sequoia
- Outer CV boot replacement kit – Suits Toyota Tundra 2007-2021, Toyota Sequoia 2008-2022, Toyota Land Cruiser 100 Series 1998-2007 and Lexus LX470, Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021
- Includes outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – CV Grease Packets
- Qty 4 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
(8 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons GS59-660 Front Struts Pair | Land Cruiser 250 + GX550
- Suits 2024+ Toyota Land Cruiser 250 Series and Lexus GX550 for 0-2″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- SOLD IN PAIRS
(0 reviews) -
Sale!Skid Plates - LC250FREE SHIPPING
within 48 US StatesLand Cruiser 250 Aluminum Skid Plate Kit (4 Pcs) 2024+
- Suits 2024+ Toyota Land Cruiser 250 (Prado 250) with the hybrid gasoline engine (USA Spec)
- Not compatible with a diff drop kit installed
- The Land Cruiser Underbody Protection Kit (4 Pcs) contains A Front skid plate, a Transmission/Gearbox skid plate, a Transfer Case skid plate and a Fuel Tank skid plate.
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to the vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all needed hardware.
- Weighs in at 82 LBS
- Proudly made in Israel.
- Lead times may vary since this is a new product on the market
(0 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLX450 & Toyota Land Cruiser 80 Series Skid Plate Kit Aluminum (3 Pcs)
- Suits 1991-1997 Lexus LX450 and Toyota Land Cruiser 80 Series Gasoline Engine Models
- The Toyota Land Cruiser 80 Full Underbody Armor (3 Pcs) contains a Transfer Case skid plate (534265), Engine skid plate (534255), and Gearbox skid plate (534260).
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser 80’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- Fits only on OEM standard vehicle.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 20 kg (44 lbs).
- Proudly made in Israel.
(5 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX570 & Land Cruiser 200 Series Skid Plate Set Aluminum (4 Pcs)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570 Gas & Diesel Engines
- The Toyota Land Cruiser 200 Series Underbody Armor (4 Pcs) contains A Front skid plate (558056), a Gearbox skid plate (558064) or (558069) Gearbox & Catalytic Converter Skid Plate (make your choice below) and a Transfer Case skid plate (558068) and a Fuel Tank skid plate (558071).
- Also available as a 3-piece skid set without the fuel tank skid plate
- They are manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Explicitly designed to complement the Land Cruiser 200’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 41 kg (90 lbs).
- Proudly made in Israel.
(3 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX570 & Land Cruiser 200 Series Skid Plate Set Aluminum (3 Pcs)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570 Gas & Diesel Engines
- The Toyota Land Cruiser 200 Series Underbody Armor (3 Pcs) contains A Front skid plate (558056), a Gearbox skid plate (558064) or (558069) Gearbox & Catalytic Converter Skid Plate (make your choice below) and a Transfer Case skid plate (558068).
- Also sold as a 4 piece kit with a fuel tank skid plate
- They are manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Explicitly designed to complement the Land Cruiser 200’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 28.5 kg (62 lbs).
- Proudly made in Israel.
(3 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX470 & Land Cruiser 100 Series Skid Plate Set Aluminum (4 Pcs)
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 4.7L V8 Gasoline Engines
- The Lexus LX 470 / Land Cruiser 100 Skid Plate Kit (4 Pcs) contains a Front skid plate (558055), Transmission skid plate (558063), Transfer Case skid plate (558067), Fuel Tank skid plate (534470).
- There is also a 3pc set without the fuel tank skid plate included
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser 100’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 47.7 kg (105 lb).
- Proudly made in Israel.
(3 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX470 & Land Cruiser 100 Series Skid Plate Set Aluminum (3 Pcs)
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 4.7L V8 Gasoline Engines
- The Toyota Land Cruiser 100 / LX 470 Skid Plate (3 Pcs) contains: Front skid plate (558055), Transmission skid plate (558063), Transfer Case skid plate (558067)
- There is also a 4pc set with a fuel tank skid plate included
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser 100’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 37.7 kg (83 lb).
- Proudly made in Israel.
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-485VT Dual Rate 4.0″ Rear Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 4.0″ with a heavy load rear end of 300-400LBS of added weight (bumper, drawers, tent, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Recommended to run with Dobinsons 6″ lift shocks for maximum travel
(0 reviews)$485.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-484VT Dual Rate 4.5″ Front Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 4.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Recommended to run with Dobinsons 6″ lift shocks for maximum travel
(0 reviews)$485.00 Select options This product has multiple variants. The options may be chosen on the product page -
Gull Wing Windows
Toyota Land Cruiser 100 Series Gull Wing Window 1998-2007
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 SUV’s
- Options for the rear left (USA driver’s side) and rear right (USA passenger’s side)
- 3mm aluminum outer panel
- 2mm stainless steel inner mounts and structure
- Powder coated texture black
- Thick rubber seal
- Lockable compression latches
- Stainless steel hinges
- Gas strut to assist with opening
- Requires assembly and installation
- Simple and reversible installation
- Made in Australia by The Cruiser Company
- Installation Instructions
(9 reviews) -
Gull Wing Windows
Toyota Land Cruiser 60 Series Gull Wing Window
- Suits 1980-1990 Toyota Land Cruiser 60 Series and 62 Series SUV’s
- Options for the rear left (USA driver’s side) and rear right (USA passenger’s side)
- 3mm aluminum outer panel
- 2mm stainless steel inner mounts and structure
- Powder coated texture black
- Thick rubber seal
- Lockable compression latches
- Stainless steel hinges
- Gas strut to assist with opening
- Requires assembly and installation
- Made in Australia by The Cruiser Company
(9 reviews)
