Your cart is currently empty!
Land Cruiser
Showing 61–90 of 339 results
-
100 Series Land Cruiser IFS (1998-2007)
Dobinsons 100 Series Lift Kit | Toyota Land Cruiser IFS V8 Gas 1998-2007 (all options)
- Build a full suspension replacement here for your Toyota Land Cruiser 100 Series, with all possible options listed on this one page
- Lexus LX470 and Land Cruiser 100 Series share the same suspension parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A base kit includes 2 Front Shocks, 2 Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs
- You can choose from twin tube, IMS Monotube or MRA 3-Way Adjustable Monotube shocks in the drop down menus
- If you have a diesel engine, you need to use this other kit page instead
From $1,330.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-169 Rear Coil Springs | Land Cruiser
- 80 SERIES (1990-1997) – Dobinsons C59-169 1.75″ with up to 220lbs weight
- 100 SERIES (1998-2007) – Dobinsons C59-169 – 1″ lift, linear rate, with stock weight. For slightly above OE stock height. Ideal if someone is doing AHC removal but doesn’t want to add lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 465/475mm free height, 227 LB spring rate
$270.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-612V 3″ Flexi Front Coil Springs | Land Cruiser 80 series
- 3″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 540/550mm free height, 17mm wire, 180-275LBF/in variable rate
- Sold in Pairs
$405.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A687 3-Way Adjustable MRA Rear Shocks | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 4-5″ of lift, or when used in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VT Dual Rate 2.5″ Rear Coils | 80 Series 1990-1997
- Lifts 2.5″ with 400LBS rear constant load. Lifts more with less weight on the vehicle
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
$485.00 Add to cart -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 22+ Sequoia 23+
- Made specifically for the 4×4 Toyota Tundra from 2022-2024 and Toyota Sequoia from 2023+ and 2022+ Land Cruiser 300 Series
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
- Assembly Instructions
$120.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS59-50649 Monotube IFP Rear Shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
$580.00 Add to cart -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-559V 1.5-2″ Land Cruiser 200 Series Rear Coils
- C59-559V – 1.5-2.0″ Lift Variable Rate – great for towing – lift height depends on rear vehicle weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 440/470 mm free height and 19mm wire diameter
- Sold as a Pair
$305.00 Select options -
200 Series Land Cruiser (2008-2021)Ships FREE !!
within 48 US StatesDobinsons Tubular UCA Kit | Land Cruiser 200 Series + Lexus LX570
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
$795.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons Adjustable Front Poly Caster Bushing Kit 0° 2.5° 3.5° | Land Cruiser
- For 0″ to 4″ of lift, Recommended when replacing 20+ year old suspension parts
- Contains all 4 bushings for the front of the radius arm to axle
- Can be set to 3 different caster settings quite easily
- The inner core can be slid out and rotated to go to the next caster setting without requiring a press
- This kit is a must for any lifted Landcruiser so that the steering control is correct giving you the best ride quality possible
- Dobinsons offer other separate bush kits for Caster and Radius Arms. Contact us for more information
- Installation Instructions
$140.00 Add to cart -
Rear Drawers
Dobinsons 100 Series Drawers for Toyota Land Cruiser 1998-2007
- The best rattle-free drawer system on the market for 100 Series Land Cruisers and Lexus LX470 Wagons!!
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Aluminum Edging Protection, Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
From $1,465.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-613V 3″ Flexi Rear Coil Springs | Land Cruiser 80 series
- 3″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 540/550mm free height, 18mm wire, 175-275LBF/in variable rate
- Sold in Pairs
$405.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60782 Front IMS Shocks | Land Cruiser 100 Series (0-2″ lift)
- Front shocks only. To order full kit, click here
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart -
4Runner 4th Gen (2003-2009)
Dobinsons GS59-637 Pair of Twin Tube Shocks for Toyota 4×4’s
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-637 Specifications: 581mm extended, 349mm compressed, 50mm body size
$310.00 Add to cart -
Accessories
Dobinsons 80 Series Drawers for Toyota Land Cruiser (1990-1997)
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Aluminum Edging Protection, Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
From $1,465.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-185 Rear Coil Springs | Land Cruiser
- 80 Series (1990-1997) – Dobinsons c59-185 – 3″ lift with up to 220lbs weight
- 100 Series (1998-2007) – Dobinsons C59-185 – 1.5″ lift, linear rate, with 440LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 480/490mm free height, 19mm wire, 277LB rate
- Sold in Pairs
$305.00 Add to cart -
Replacement Bushings
Dobinsons Lower Shock Bushings (2 Halves) for -682 -687 -685 -649 -651 -637
- Dobinsons replacement rear lower shock bushing – 2 half bushings for 1 shock
- Suits a variety of Dobinsons shocks, part numbers ending in -682 -687 -685 -649 -651 -637
- Full list of part numbers this fits is below
- This is for a single bushing set only for 1 shock
- 2 half bushings, they go in from either side of the lower eyelet to form a complete bushing
- High quality natural rubber bushing
$20.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
From $1,510.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons 0-3.5″ IMS Lift Kit Builder | Land Cruiser 80 Series
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- IMS Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, you can add any other parts you need – you choose
- Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift
From $1,840.00 Select options -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-542 2″ Land Cruiser 200 Series Front Coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445/440mm free height, 19mm wire, 580LB rate
- Sold as a Pair
$270.00 Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60688 IFP Front Struts | Land Cruiser 200 Series
- Front struts only (no coils). For a full suspension, click here
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 606mm extended, 438mm compressed
- SOLD IN PAIRS
$720.00 Add to cart -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons 100 Series IMS Kit | Toyota Land Cruiser IFS V8 Gas 1998-2007
- For 1998-2007 Land Cruiser 100 Series and Lexus LX470
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- IMS Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Standard Kit Includes 2 Front Shocks, 2 Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs – select your preferences
From $2,010.00 Select options -
60 62 Series Land Cruiser (1980-1989)
Dobinsons HJ61-7L-R Rear Medium Load Leaf Springs Pair for 60 62 Series
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
- 50mm rear lift with 0-220LBS of additional weight
$430.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-614V 4″ Flexi Front Coil Springs | Land Cruiser 80 series
- 4″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 570/580mm free height, 17mm wire, 180-275LBF/in variable rate
- Sold in Pairs
$405.00 Add to cart -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons GS59-782 Pair of Front Shocks | Land Cruiser 100 Series (0-2″ lift)
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-782 Specifications: 442mm extended, 288mm compressed, 60mm body size
- **Photo for illustration purposes, not of actual shocks
$310.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Bumper with Tire and Jerry Can Carrier
- See product walk-around video down below
- Comes with Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire, on right side (US Passenger side)
- Includes single or dual Jerry Can Carrier on the left side (US Driver’s side)
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$2,860.00 Select options -
100 Series Land Cruiser IFS (1998-2007)Ships FREE !!
within 48 US StatesDobinsons MRA59-A786 MRA Extended Travel Adj Front Shocks | 100 Series (2-2.5″ Lift)
- Extended Travel Front Shocks for 100 Series and LX470 – these require a Diff Drop Kit and UCA’s to be installed for full articulation and to prevent axle binding
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Reservoir mounts to the empty holes forward of the shock on both sides
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
$1,350.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons 10mm Coil Spacer (Single) for Front of Toyota Land Cruiser 80 105
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Lifts 10mm (0.4″)
$35.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons 3-Way Adjustable MRA Front Struts Toyota Land Cruiser 200 Series
- Suits 2008-2021 Toyota Land Cruiser 200 Series
- Adjuster rings on strut body are black, not purple
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Reservoir mounting installation
- Must mount the banjo fitting and hose inwards to engine on MRA struts
$1,410.00 Add to cart