Your cart is currently empty!
Toyota
Showing 871–900 of 1258 resultsSorted by popularity
-
4Runner 4th Gen (2003-2009)OME 2884 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2884
- Bar Size : 16.5mm
- Free Height : 390mm
- Number of Turns : 9.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
- These are comparable to Dobinsons C59-300 coils
(13 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD129 Rear Air Locker Toyota 8.4″ 30 Spline
- For Use only with Toyota 8.4″ 12 Bolt 30 spline Rear Axle
- Suits multiple vehicles, the full list is down below. Used in older Tacoma, Sequoia, Tundra and T100 Trucks.
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(16 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD146 Rear Tundra Air Locker 5.7L V8 10.5″
- For Use only with Toyota Tundra 5.7L V8 REAR 2007 to 2021 with 10.5″ 12 Bolt Ring Gear and 36 spline axles
- Will not suit 4.6L or 4.7L engines, as they use a smaller rear differential (RD152)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD121 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.73-
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.73 And Down Factory Gears
- Usually all models that came with a manual transmission used 3.73- factory gear ratios, but you must check before ordering
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are re-gearing, check with the gear manufacturer for which Air Locker to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421110 Under Vehicle Protection Kit | Toyota 4Runner 5th Gen (with KDSS) 2010-2024
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITH KDSS
- You must check to make sure you have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(9 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
- Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(11 reviews) -
Sale!Add-a-LeafFREE SHIPPING
within 48 US StatesWheeler’s 1.5″ Lift Add-A-Leaf Set for 1996-2004 Toyota Tacoma
- Suits 1996 to 2004 Tacoma 4×4 and Pre-Runner
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 1.5″ of lift approximately on dual cab short bed models. Single or Access cab models may see different lift heights
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Toyota Land Cruiser 80 Series 1991-1997 Long Range Replacement Fuel Tank (1FZ Gas)
- Suits Toyota Landcruiser 80 Series 1991-1997 and Lexus LX450 with the 1FZ Gas Engine
- For US-spec 80 series with a single original tank (not dual tanks)
- Replacement tank – 37 gallon capacity replaces original 25 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Part Number TLC80FR-PA-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
60 62 Series Land Cruiser (1980-1989)
Toyota Land Cruiser 62 Series 1988-90 Long Range Replacement Fuel Tank (EFI USA Spec)
- Suits Toyota Landcruiser 62 Series Wagons 1988-1990 with EFI engine
- Replacement tank – 40 gallon capacity replaces original 23.8 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 3 hours
- Part Number TLC602RE
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Tacoma Snorkel SS171HP – Toyota Tacoma 2nd Gen 2005-2015
- Suits Toyota Tacoma 2005-2015 Models – 2nd Gen Tacoma
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions.
- Vehicle specific design and factory airbox adaption fitment.
- Manufactured using durable, UV stable cross linked polyethylene material.
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets.
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream.
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(25 reviews) -
Tacoma 2nd Gen (2005-2015)
RCI Tacoma Rock Sliders | 2005-2015 Toyota Tacoma
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Fits 2005-2015 4wd access cab and double cab trucks
- Made to order from your selections below
- Made in USA
(4 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDirt King Performance Tacoma Lower Control Arms Pair for 2016-2023
- Suits 2016-2023 3rd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US StatesDirt King Performance Tundra Lower Control Arms Pair – Tundra + Sequoia
- Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
55 Series (1970-80)
Dobinsons 1.75″ Suspension Kit for Toyota Land Cruiser FJ55 1970-1980
- Full 1.75″ suspension for Toyota Land Cruiser Wagon FJ55 models, from 1970 to 1980
- All parts are also available separately, HERE
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Hand made leaf springs, built in Queensland, Australia
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add the home delivery fee below. We will be in touch with that delivery address
(3 reviews) -
Front Bumpers
Dobinsons 100 Series Front Bumper | Land Cruiser 100 Series IFS 1998 to 2007
- Suits all year models of Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. Removable Top Tubes
- Supplied Black, but can be painted by your paint shop. Suits 10000 – 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Rear Bumpers
Dobinsons Land Cruiser 70 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 and 78 Series Land Cruiser Wagons pre-2007 – 5 Door Models
- Will not suit any Prado variant 70x series without modifications
- Comes standard as Black Powder Coat
- 542mm (21.3″) wing length (length of the side wings from the rear bumper forward down the bottom of the quarter panel)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- ***Does not include Hi-Lift Jack carrier as shown in photos***
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(15 reviews) -
Snorkel
Dobinsons 4×4 Snorkel Kit | Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985-07 3.4L/4.0L
- Dobinsons SN59-3374 Suits 4.0L Diesel, 4.0L Petrol, 3.4L Diesel
- 1985 to 2007 (Narrow Front) 70 Series Toyota Land Cruisers, including the 70, 71, 73, 74, 75, 78, and 79 Series variant
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
(8 reviews) -
Sale!Skid Plates - 3rd Gen 4Runner
RCI Fuel Tank Skid Plate | 1996-2002 Toyota 4Runner
- Suits 1996-2002 Toyota 4Runner
- Smooth, flat surface that easily slides over obstacles
- Black powder coat for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware included and instructions link below
- Direct bolt on addition to existing factory attachment points, no drilling
- Material: 3/16” Steel
- Weight: 3/16” Steel- 43lbs.
- Finish: Heavy Duty Black Powder Coat
- MADE IN USA
- Fuel Tank Skid Installation Guide
(7 reviews) -
Sale!Suspension
Dobinsons GS59-651 Rear Twin Tube Shocks Pair | Scratch & Dent
- Scratch & Dent Pair. Customer ordered the wrong size shocks, attempted to install but they’re too long for his vehicle, returned. Mild shipping scuffs back and forth, but never actually used
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- See list of suitable vehicles down below
- 591mm extended, 363mm compressed
- 60mm diameter outer tube size
(0 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA45-A913 3-Way Adjustable MRR Rear Shocks Pair
- Suits REAR Nissan Patrol GQ Y60 1987-1998 4″ Lifts, and Nissan Patrol GU Y61 2007+ 3-4″ Lifts, and Toyota Land Cruiser 78/79 Series Trucks 1999+ with 3″ lift, Dodge Ram 1500 4×4 1994-2008, Dodge Ram 4×4 1500 2009-2021, Dodge Ram 4×4 2500HD 1994-2013, Dodge Ram 4×4 3500HD 1994-2021,
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Bump stop extensions and longer brake lines must be run with these longer shocks on some models
- Full 2 year limited warranty, no set rebuild time period
(9 reviews) -
Dobinsons
Front Remote Resi Mounting Bracket Kit for Patrol GU GQ
- Suits FRONT Nissan Patrol GQ Y60 1987-1998 4″ Lifts, and Nissan Patrol GU Y61 2007+ 3-4″ Lifts, and Toyota Land Cruiser 78/79 Series Trucks 1999+ with 4″ lift.
- This is recommended to run with Dobinsons front MRR remote resi shocks for an easier mounting and access point for the front reservoir
- Includes both sides to install the resi onto the coil tower
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA45-A914 3-Way Adjustable MRR Front Shocks Pair
- Suits FRONT Nissan Patrol GQ Y60 1987-1998 4″ Lifts, and Nissan Patrol GU Y61 2007+ 3-4″ Lifts, and Toyota Land Cruiser 78/79 Series Trucks 1999+ with 4″ lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Full 2 year limited warranty, no set rebuild time period
- It is recommended to run these shocks with Remote Resi bracket kit RM45-007 for a cleaner and easier installation
(6 reviews) -
Sale!Performance Upgrades - Tundra 2nd Gen
TG Hub-Centric Wheel Spacers Pair 5×150 | From 3/4″ to 2.0″
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 REAR WHEELS ONLY
- Front and Rear for these: 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570, 2008-2022 Toyota Sequoia, 2007-2021 Toyota Tundra
- Multiple thickness options from 3/4″ up to 2.0″ thick
- 5x150mm Bolt Pattern
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- Class 10.9 M14-1.5 studs and nuts
- For Toyota and Lexus Vehicles with Hub-Centric Wheels (must be Hub-Centric)
- Sold in Pairs
- NOTE! Please verify pattern before ordering!
- See vehicle list down below
- On the ¾” & 1” thick wheel spacers, you will need to trim your wheel studs in order for the wheel to seat on the face of the wheel spacer
- Sold in Pairs
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(4 reviews)$132.70 – $154.86 Select options This product has multiple variants. The options may be chosen on the product page -
Bumpers + Roof Racks - LC250
Toyota Land Cruiser 250 Front Bumper – High Clearance
- Suits 2024+ Toyota Land Cruiser 250 Series and Land Cruiser Prado 250 Series
- 100% Australian Made In-House
- +- 136lbs add weight
- Air Bag Compliant
- PDC sensor mounts
- Retains functional radar and front camera
- 5mm Steel Construction
- 10mm Thick Mounting Plate With Eyelet
- 2 3/8 inch (60.3mm) Tube With 0.156″ (3.9mm) DOM Wall
- Included Satin Black Powder Coat
- Power coat can be painted over by your local paint shop to color match your vehicle, and also to add extra protection for longer life
- All bumpers are grit blasted, zinc powder primed, and powder coated satin black
- Low Mount Winch Compatible (with remote-mounted control box)
- Roadvision ADR Approved Indicator
- Roadvision Recessed Accessory Light ( Compatible with Baja designs S2s )
- 4 x Antenna / Aerial Mounts
- 9″ Spot / Driving Light Compatible
- Note: It is highly recommended to add shipping insurance during checkout in case the freight line damages or scratches it in transit.
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A461 3-Way Adjustable Rear Shocks Pair | Toyota Hilux Rogue
- Suits Toyota Hilux Rogue GR Sport 2022-2025+ with the shocks mounted outside the frame rails
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)FREE SHIPPING
within 48 US StatesETA is end of JulyDobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota Hilux Rogue
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks
- Suits 2022-2025+ Toyota Hilux Rogue and GR Sport Wide Track Models
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- *Must reuse OEM Washers
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered Here
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)
Dobinsons UB59-440K U-Bolt Kit (2 Pairs)
- UB59-440K Suits 2022+ Toyota Hilux Rogue and GR Sport Wide Track Models
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 2 leaf springs
- These are square at the top
- Suits Dobinsons L59-171-R, L59-173-R, L59-174-R, L59-175-R, L59-176-R leaf springs
- Photo for Illustration purposes only
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)
Dobinsons UB59-439K U-Bolt Kit (2 Pairs)
- UB59-439K Suits 2022+ Toyota Hilux Rogue and GR Sport Wide Track Models
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 2 leaf springs
- These are square at the top
- Suits Dobinsons L59-171-R and L59-178-RP leaf springs
- Photo for Illustration purposes only
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50461 Monotube 2.2″ IFP Rear Shocks Pair | Hilux Rogue GR Sport
- Suits 2022-2025+ Toyota Hilux Rogue and GR Sport Wide Track Models (not sold in the USA)
- These mount in the factory positions on the OUTSIDE of the frame/chassis
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photo for illustration purposes
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50460 Front 2.2″ IFP Struts | Hilux Rogue GR Sport
- Suits 2022-2025+ Toyota Hilux Rogue and GR Sport Wide Track Models (not sold in the USA)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Height adjustable with a fully threaded body
- Suits any lift height from 0-3″
- Use with Dobinsons C59-302 or C59-314 coils to add lift
- These do not come set to any specific preload height
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – set to 250mm
- Photos for illustration purposes
(0 reviews)
