Your cart is currently empty!
Toyota
Showing 991–1020 of 1257 resultsSorted by popularity
-
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesAir Lift LoadLifter 5000 Airbag Kit for Toyota Tacoma 2024-2025+
- Made specifically for the 2024-2025+ Toyota Tacoma with coil spring rear suspension
- Suits 2WD and 4×4 Models, including all factory variants
- Up to 5,000 lbs. of leveling capacity
- Air Springs fully adjustable from 5-100 PSI for precise control
- Levels your vehicle when towing or hauling for a safe, comfortable ride.
- Eliminates sag and bottoming out
- Upper and lower roll plates to protect air springs
- Easy to install with included instructions
- No frame drilling required
- Installs on the outside of the coils (not inside)
- Features Air Lift’s Limited Lifetime Warranty and 60 Day Ride Satisfaction Guarantee
- Intended for stock ride height trucks and not those that are lifted 2″ or more
- Installation Guide
- Will not work with rear leaf-spring equipped models!!
(8 reviews) -
Dobinsons
Dobinsons Single Caster Wedge 60MM Wide – 3 Degrees
- 3 Degree Caster shim can be used to correct front caster / pinion angle or rear pinion angle on a 60mm wide leaf spring
- Sold individually
- Suits the following Dobinsons leaf spring part numbers:
- 106-4+3-R
- 106-5+3-R
- B2600-4X4-R
- DAI-009-F
- DAI-011-R
- DAI-015-R
- DAI-020-F
- DAI-021-R
- F77-5+2-R
- F77-5L-F
- HIL-001-F
- HIL-002-F
- HIL-003-F
- HIL-006-R
- HIL-010-F
- HIL-034-R
- HIL-035-R
- HIL-4+2-R
- HIL-5+2-R
- L19-131-R
- L19-132-R
- L19-133-R
- L21-140-R
- L21-141-R
- L21-142-R
- L39-030-R
- L39-031-R
- L39-032-R
- L45-002-R
- L45-003-R
- L45-004-R
- L45-151-R
- L45-152-R
- L45-153-R
- L45-154-R
- L59-040-R
- L59-041-R
- L59-042-R
- L59-110-R
- L59-111-R
- L59-112-R
- L59-120-R
- MAZ-003-R
- MK-6L-F
- MK-7L-F
- MQ-6L-F
- MQ-7L-F
- MQ-UTE-R
- MQ-WAG-R
- NAV-005-R
- NAV-4WD-R
- NIS-260-F
- RODE-008-R
- RODE-011-R
- RODE-012-R
- RODE-013-R
- TOY-470-R
- UAZ-004-R
- UAZ-006-R
(7 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesLongfield IFS +3.5″ CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- +3.5″ length for use on +3.5″ long travel kits (cannot be used with stock lower control arms)
- Longfield IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- 35-spline CV Joint stars & axle shafts.
- Available in direct stock replacement versions & long-travel versions.
- CV Joints housings are 100% SAE 4340 Chromoly Steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 Chromoly Steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-Resistant 52100 Alloy Steel Bearing Balls.
- All Components Precision Polished to Remove Imperfections and Prevent Stress Risers.
- CV Joints Black Oxide & Powder-Coat Finish for Corrosion Resistance.
- CV Joints are pre-lubricated with racing-grade Red Line CV-2 Moly Grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(5 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesLongfield IFS +2.75″ CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- +2.75″ length for use on +2.75″ long travel kits (cannot be used with stock lower control arms)
- Longfield IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- 35-spline CV Joint stars & axle shafts.
- Available in direct stock replacement versions & long-travel versions.
- CV Joints housings are 100% SAE 4340 Chromoly Steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 Chromoly Steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-Resistant 52100 Alloy Steel Bearing Balls.
- All Components Precision Polished to Remove Imperfections and Prevent Stress Risers.
- CV Joints Black Oxide & Powder-Coat Finish for Corrosion Resistance.
- CV Joints are pre-lubricated with racing-grade Red Line CV-2 Moly Grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(7 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesLongfield IFS +2.00″ CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- +2.00″ length for use on +2.00″ long travel kits (cannot be used with stock lower control arms)
- Longfield IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- 35-spline CV Joint stars & axle shafts.
- Available in direct stock replacement versions & long-travel versions.
- CV Joints housings are 100% SAE 4340 Chromoly Steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 Chromoly Steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-Resistant 52100 Alloy Steel Bearing Balls.
- All Components Precision Polished to Remove Imperfections and Prevent Stress Risers.
- CV Joints Black Oxide & Powder-Coat Finish for Corrosion Resistance.
- CV Joints are pre-lubricated with racing-grade Red Line CV-2 Moly Grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(5 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesLongfield IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard/Stock length for use on lifted and non-lifted applications
- Longfield IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- 35-spline CV Joint stars & axle shafts.
- Available in direct stock replacement versions & long-travel versions.
- CV Joints housings are 100% SAE 4340 Chromoly Steel.
- Double-offset inboard CV joint with 1-inch diameter all bearings.
- SAE 4340 Chromoly Steel axle shafts with black powder-coat finish.
- 300M internal components.
- Proprietary elastomer boot material for enhanced puncture & tear resistance.
- Wear-Resistant 52100 Alloy Steel Bearing Balls.
- All Components Precision Polished to Remove Imperfections and Prevent Stress Risers.
- CV Joints Black Oxide & Powder-Coat Finish for Corrosion Resistance.
- CV Joints are pre-lubricated with racing-grade Red Line CV-2 Moly Grease
- Includes IFS axle spindle nuts.
- Sold as a pair
- Made in the USA
- Installation Guide
(8 reviews) -
PowerbrakeFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | 60/62 Series Front
- Suits Toyota Land Cruiser 60 and 62 Series 1980-1990 Front
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(7 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesPower Flow Toyota Land Cruiser 200 Series Steering Rack – All New
- Direct replacement for Toyota OEM Part Number 44200-60170 for Land Cruiser 200 Series and Lexus LX570 5.7L V8 2008-2021
- High-quality LC200 OEM-style Replacement
- Brand New Rack, NOT rebuilt
- No core charge and no return shipping of the old unit required
- Largest & strongest Toyota-size steering rack
- Has 3rd rack mount that Tacoma or Tundra racks do not have.
- High-temperature seals
- M22-1.5 Threaded Tie Rod ends
- Can be used as an OEM replacement or as part of the All Pro +3.50″ Modular Long Travel Kit or similar
- Adaptation is required for this to fit Tacoma, 4Runner, GX470, GX460 and FJ Cruiser – that adaptation comes with the long travel kit (sold separately)
- Includes only what is in the photos
- You can add a Tie Rod Kit down below to make your own tie rods
(3 reviews) -
Apache OffroadFREE SHIPPING
within 48 US StatesApache Offroad AX2 IFP Rear Shocks Pair | 2005-2023 Tacoma 00-06 Tundra
- Suits Toyota Tacoma 2nd and 3rd Gen, 2005-2023, and Toyota Tundra 1st Gen 2000-2006
- Suits 0-3″ of lift
- Direct Bolt on Installation
- Includes upper bushings and washers, and lower bushings already pressed in
- Includes shock boots to protect the shock shaft
- Proprietary high-Zinc content paint coating for superior protection against rock chips and abrasion damage
- Nitrogen Charged Monotube Design
- Internal Floating Piston- Separates the oil and nitrogen to prevent shock fade
- Fully rebuildable and revalveable
- Linear Valving
- Hardened Chrome Piston shaft- resists rock damage and corrosion
- Precision Japanese CNC machined, High Flow Piston
- Heavy Duty Ultra Low Friction Japanese 3 Stage Seal System
- High Quality German Oil
- Heavy Duty Lower Leg
- Hardened Rubber Lower Bushing provides a long and quiet life
- Heavy Duty 1/8″ (3mm) DOM wall thickness
- 2 Year Warranty
- 379mm Compressed, 614mm Extended
- SOLD IN PAIRS – Includes new washers and bushings for the top, and lower bushings are pressed in
(10 reviews) -
Apache OffroadFREE SHIPPING
within 48 US StatesApache Offroad AX2 IFP Struts Pair | 03-09 4Runner, 06-09 FJ, 05-23 Tacoma, GX470
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009, suitable for 0 – 3.5″ of lift
- 3 Spring seat settings: OEM height 0″ (213mm), +1″ (226mm), and +1.5″ (231mm)
- Use with OEM coils for a mild lift by preloading, or run lifted coils like Dobinsons
- Direct Bolt on Installation
- Proprietary high-Zinc content paint coating for superior protection against rock chips and abrasion damage
- Nitrogen Charged Monotube 2.2″ Body Design
- Internal Floating Piston- Separates the oil and nitrogen to prevent shock fade
- Fully rebuildable and revalvable
- Linear Valving
- Hardened Chrome Piston shaft- resists rock damage and corrosion
- Precision Japanese CNC machined, High Flow 50mm Piston
- Heavy Duty Ultra Low Friction Japanese 3 Stage Seal System
- High Quality German Oil
- Heavy Duty Lower Leg
- Hardened Rubber Lower Bushing provides a long an quiet life
- T6 6061 Aluminum Spring Seat
- Heavy Duty Spring Seat Circlip
- Heavy Duty 1/8″ (3mm) DOM wall thickness
- Down travel Spacer (under top hat spacer shaft spacer/extender) to provide adequate down travel for lift heights of 3-3.5″- Eliminates the need to rebuy extended travel struts when making changes to taller lift heights. Ideal for those who change their lift height overtime. Works by extending the point at which the upper washer sits on the shaft, thus raising the mounting position of the top hat and increasing down travel. Use for lifts 3-3.5″
- Works from 0-3.5″ of lift
- 2 Year Manufacturer’s Warranty
- No set rebuild periods
- 430mm Compressed, 570 mm Extended without DT Spacer, 575mm Extended with DT Spacer
- SOLD IN PAIRS – Includes new washers and bushings for the top, and lower bushings are pressed in
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesApache Offroad Assembled Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Hilux 2005-2024 and Fortuner 2005-2024
- Complete assembled kit for both left and right hand side, includes new Moog ball joints, ball joint caps, rubber frame bushings
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Manufactured from Black Powder coated 1.5″ Steel Tube
- The Apache UCAs Feature Hardened Rubber Bushings for a quiet ride
- Comes assembled with OE sized Greaseable Moog Problem Solver Ball Joints
- Includes Machined Aluminum Dust Covers with dust seals
- Works for any lift height of 2.0″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Do not forget to grease your ball joints 🙂 They do not come pre-greased.
- Product Video
(10 reviews) -
Upper Control Arms
SPC 35101 Replacement Ball Joint Set for 25470 25540 25560 25660
- Replaces Ball Joint on SPC Arms – 25470, 25540, 25560, 25660
- Will not work on OEM or any other brand aftermarket upper control arms (UCA’s)
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Suits Nissan Frontier 2005-2021, Nissan Frontier 2022+, Nissan Navara 2005-2020. Nissan NP300 2016+, Nissan Xterra (2005-2015), Nissan Pathfinder R51 2005 to 2012
- Nissan Titan and Armada
- Ford Ranger T6
- Sold in Pairs
- Fully seated boot to keep grease in and contaminants out for a maintenance-free joint
- High strength steel forging with offsets provides camber & caster adjustability
- One piece polymer race tests like OE and provides low & smooth turning torque
- Oversized ball generates 80˚ of articulation with a 25% increase in neck cross section vs. OE for added strength
- Modern grease formula ensures quiet and smooth operation with reduced wear for extended life
- Extended threads on ball stud will work with most popular spindle gusset kits
- These ball joints are reverse compatible and a direct replacement for the SPC upper control arm sets
- Installation Instructions
(10 reviews) -
RCI Off Road
RCI Toyota Tundra Crewmax Roof Rack 2007-2021
- Suits 2007-2021 Toyota Tundra CrewMax Only
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, a spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing. 1″x 2″ black anodized aluminum T-slot cross-bars. 1/8″ 5052 aluminum front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is features injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- All hardware and installation instructions provided
- On models with the shark fin antenna, the rear fairing may need to be removed and the rearmost extrusion may need to be moved to avoid the shark fin
- Weighs approximately 32lbs
- Made in the USA
- INSTALL GUIDE
(6 reviews) -
Full Suspension Kits - Tacoma 4th GenFREE SHIPPING
within 48 US StatesDobinsons 2-3″ MRR 3-Way Adjustable Lift Kit | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma 4×4 Models with coil springs in the back
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose from 2 or 3″ of front lift, and 2″-3″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit leaf spring equipped models
- Coil seat for MRA59-A490 should be set at 251mm (9.9″) from the strut bushing eye
- Front MRA struts assembly instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
(0 reviews) -
Full Suspension Kits - Tacoma 4th GenFREE SHIPPING
within 48 US StatesDobinsons 2-3″ IMS Lift Kit | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma 4×4 Models with coil springs in the back
- Choose from 2 or 3″ of front lift, and 2″-3″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit leaf spring equipped models
- Coil seat for IMS59-60490 should be set at 251mm (9.9″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
- Note: A diff drop kit should be run if you have a base model Tacoma or if you’re running 3″ of lift
(0 reviews) -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons 2-3″ MRR 3-Way Adjustable Lift Kit | Toyota Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 4×4 Models
- These specs are based on the 2.4L and 2.7L 4Cyl Engine models
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Choose from 2″, 2.5″ or 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Front MRR struts assembly instructions
- Front MRR installation instructions
- Rear Shocks Installation Instructions
- This kit is also available with Twin Tube or IMS Monotube Struts and Shocks
(0 reviews) -
250 Series Land Cruiser (2024-2025+)
Dobinsons C59-816 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with 150-220 constant front end weight (bumper, winch, etc) with the 2.4L or 2.7L gas engine.
- Lifts Lexus GX550 2.0″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Tacoma Strut Mounts Pair for Toyota Tacoma 2024+
- Made specifically for the 4×4 Toyota Tacoma 2024-2025+
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesETA is SeptemberDobinsons MRA59-A490 3-Way Adjustable Front Struts Pair | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma
- Can be used with OEM coils or with Dobinsons lifted coils
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A490 should be set at 251mm (9.9″) from the strut bushing eye
- Photos for illustration purposes only
- New Dobinsons Strut Mounts should be run with these for strength and longevity
(0 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesIcon 2024+ Tacoma Rear 0.5″ Lift Triple Rate Coil Spring Pair
- Suits 2024-2025+ Toyota Tacoma with coil spring rear end
- Will not fit 2024 Toyota Tacoma TRD PreRunner
- Sold as a Pair
- 0.5″ rear lift height over stock
- Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
- Significantly improves on- and off-road ride quality and performance over stock
- Dual stage powder coating for corrosion resistance
- Lifetime guarantee against sagging/breakage
(0 reviews) -
Full Suspension Kits - Prado 90 95FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable Land Cruiser Prado 90 95 MRR Lift Kit
- Suits 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Common installation instructions
- Note: This Prado 90 platform shares the same suspension design as the 3rd Gen Toyota 4Runner, so many descriptions will list the 3rd Gen 4Runner as that’s what these parts are most commonly sold for. However the weight of the Prado 90 is different, so the coil specs have been adjusted to suit the Prado 90.
(0 reviews) -
Prado 90 + 95 - RZN VZN KZN KDJ (1996-2002)FREE SHIPPING
within 48 US StatesDobinsons Toyota Land Cruiser Prado 90 95 Snorkel Kit for 1996-2002
- Suits 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models VZJ90, VZJ95 with the 3.4L V6 gasoline engine
- Mounts to the right hand side
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(0 reviews) -
4Runner 3rd Gen (1996-2002)
Dobinsons C59-303R Rear Lifted Coils | 3rd Gen 4Runner & Prado 90 95 – Pair
- Suits 1996-2002 Toyota 4Runner 3rd Gen and 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Gives 2″ of lift with 600-800LBS of rear constant weight (rear bumper, drawers, roof rack, tent, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – RED
- 395mm free height, 18mm wire, 388LBF/in spring rate
- Sold in Pairs
(0 reviews) -
Prado 90 + 95 - RZN VZN KZN KDJ (1996-2002)
Dobinsons Rear Bumper with Tire and Jerry Can Carrier | Prado 90 & 95
- Made for 1996-2002 Toyota Land Cruiser Prado 95 and 95 Series RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Comes standard as Black Powder Coat
- Full bolt on installation to replace your stock rear bumper
- Moves the spare tire off the back door and onto the bumper
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Choose from a single or dual jerry can carrier below
- Watch the video below for how to install it
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(10 reviews) -
Silverado 1500 (2019-2024)FREE SHIPPING
within 48 US StatesDobinsons 2″ IMS Quick Ride Suspension Kit | Chevy Silverado + GMC Sierra 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Does not suit Trailboss or AT4 models
- Affordable 2.0″ Lift Suspension System without requiring new rear leaf packs, with 2.6″ Body Shocks!!
- Complete Quick Ride suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to provide comfort and lift
- Choose your desired suspension parts to build the kit best suited to your weight
- Fully rebuildable and re-valvable IMS struts and shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Struts feature clip adjustment levels for fine tuning of lift height
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 231mm (9.07″)
- Photos for illustration purposes
(0 reviews) -
Silverado 1500 (2019-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS09-60178 2.6″ IFP Front Struts Pair | Chevy Silverado 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- Recommended to run with Dobinsons coils
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 231mm (9.07″)
- Photos for illustration purposes
(0 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesFront +2″ FJ Cruiser Long Travel Kit | Toyota FJ Cruiser
- Suits Toyota FJ Cruiser 2006-2016 2WD and 4WD
- Adds 2.0″ of width to either side for a total of 4″ total track width added!!!
- 4WD requires long travel axle shafts or full axle assemblies
- 2” Wider Per Side: Adds 2” of width per side, boosting suspension travel by 25%.
- Stock Fender Compatibility: Works with stock fenders when using positive offset wheels.
- Aggressive Look Option: Supports zero or negative offset wheels with flared fenders.
- Extended Wheelbase: Allows proper fitment of 35” tires.
- SilentSpin Bushings: Greaseless bushings in upper control arms for low maintenance.
- Delrin Bushings with PTFE: Smooth operation in lower control arms with PTFE-infused Delrin.
- Heavy-Duty Moog Ball Joints: Reliable outer pivots with heavy-duty Moog ball joints.
- Aluminum Skid Plates: Replaceable skid plates protect lower arms on rough trails.
- Flexible Installation: Compatible with coilovers, coilovers with bypasses, or coilovers with bump stops.
- Aluminum Strike Pads: Designed for optimal bump stop engagement.
- Complete Hardware Included: Comes with all necessary mounting hardware.
- Made in the USA: Proudly designed and manufactured in the United States.
- What’s Included:
- Boxed plate upper control arms
- Boxed plate lower control arms
- 8″ quad wrapped limit straps
- Weld on adjustable limit strap mounts
- 17-4 stainless steel tie rod extensions
- DOT approved extended brake lines
- Grade 8 mounting hardware
- Billet aluminum bump stop strike pad
- Zinc plated bushing washers
- No coilovers or bump stops are included!!
- Installation instructions 2009 and Older and 2010+
(0 reviews) -
Suspension
Tundra Spindle Gussets | Toyota Tundra 2007-2021
- Suits 2007-2021 Toyota Tundra
- The factory Toyota spindles commonly bend during extreme off-road use
- Our spindle gussets solve this issue by reinforcing the problematic areas
- The preformed gussets simply weld to the factory forged spindles, dramatically increasing the strength
- This product is designed to allow for maximum wheel backspacing and eliminates the use of the factory sway bar
- Check out this in depth review on the product: [Trail Tacoma]
- Welding Required
- Made in the USA
(0 reviews)
