Your cart is currently empty!
Toyota
Showing 1201–1230 of 1231 resultsSorted by popularity
-
AccessoriesFREE SHIPPING
within 48 US StatesCompressor Mount & Connection Kit – Tacoma Engine Bay For Dual Air Compressor
- 16-22 Toyota Tacoma Engine Mount Install Bracket Kit.
- For ARB Dual Air Compressor
- Designed to fit into your engine bay
- Heavy Duty Mounting Bracket and hardware
- Powder Coated Black
- 23 inch Hi Temp/Hi Pressure Air Line Hose
- 2 x 90 degree 3/8 Inch Swivel Push-to-Connect Fitting
(3 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)Dobinsons Rear Heavy Load Leaf Springs Pair for FJ45 HJ45 pre 8/1980 (30mm eyes)
- Rear Leaf Springs for the Toyota FJ45 HJ45 4×4 up to 8/1980 models and they give 40mm (1.6″) of lift with 440LBS of constant rear weight.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
(2 reviews) -
Full Suspension Kits - FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74FREE SHIPPING
within 48 US StatesDobinsons 2.0″ 3-Way Adjustable MRA Suspension Kit | Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Full 2″ MRA Suspension Kit Replacement for 1985-1989 Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Select medium or heavy load leaf spring options
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
(7 reviews) -
FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
Dobinsons HJ61-8L-R Rear Super Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with SUPER HEAVY rear end weight of 660LBS+
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
(6 reviews) - Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
-
Dobinsons
Dobinsons HJ61-7L-R Rear Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989
- 50mm rear lift with 330LBS of additional constant weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
(4 reviews) -
4Runner 4th Gen (2003-2009)
OME 2899 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2899
- Bar Size : 19 mm
- Free Height : 400mm
- Number of Turns : 6.75
- Coil Weight (each): 6.9 Kg | 15.2 lbs
- Spring Rate : 387 lbs
- Sold in Pairs
(12 reviews) -
4Runner 4th Gen (2003-2009)
OME 2898 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2898
- Bar Size : 18 mm
- Free Height : 400mm
- Number of Turns : 6.75
- Coil Weight (each): 6.1 Kg | 13.4 lbs
- Spring Rate : 318 lbs
- Sold in Pairs
(11 reviews) -
4Runner 4th Gen (2003-2009)
OME 2896 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2896
- Bar Size : 18 mm
- Free Height : 390mm
- Number of Turns : 6.75
- Coil Weight (each): 6.1 Kg | 13.4 lbs
- Spring Rate : 318 lbs
- Sold in Pairs
(13 reviews) -
4Runner 4th Gen (2003-2009)
OME 2888 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2888
- Bar Size : 17 mm
- Free Height : 405mm
- Number of Turns : 10.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are comparable to Dobinsons C59-314 front coils
(11 reviews) -
4Runner 4th Gen (2003-2009)
OME 2887 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2887
- Bar Size : 17 mm
- Free Height : 400mm
- Number of Turns : 10.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
(7 reviews) -
Sale!Accessories
RCI Tacoma Aluminum Roof Rack | 2005-2023 Tacoma
- RCI 2nd and 3rd Gen Toyota Tacoma Aluminum Roof Rack – suits 2005-2023 DUAL CAB models
- Only suits the dual cab models, will not suit access cabs
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, roto-pax, spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is the only one on the market that utilizes injection molded / CNC cut rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs approximately 32lbs
- Installation Instructions
- Made in the USA
(8 reviews) -
55 Series (1970-80)
Toyota FJ55 Series 1967-1980 Long Range Replacement Fuel Tank (55gal)
- Suits Toyota FJ55 Series Land Cruiser 1967-1980
- This is a replacement tank that replaces your OE fuel tank, it holds 55 gallons instead of the stock 23.8 gallons and fills the same way an OE tank fills
- 55 gallon capacity, replaces the original tank
- Suits gasoline or diesel fuel
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 3.5 hours
- THIS TANK IS A SPECIAL ORDER – ALLOW APPROX 4-6 MONTHS TO BRING FROM AUSTRALIA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- Special order tank, once an order has been placed, it cannot be cancelled.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD152 Rear Air Locker Toyota 9.5″ 32 Spline
- For Use only with Toyota 9.5″ 12 Bolt 32 spline Rear Axle
- Suits multiple vehicles, the full list is down below
- Will not suit 5.7L Tundra engines, as they use a larger rear differential (RD146)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(16 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD193 Rear Air Locker Toyota 8.15″ 12 Bolt
- For Use With Toyota 8.15″ 12 Bolt Shim Adjusted 30 Spline solid axle – used for many years in some rear applications
- Full vehicle fitment list is further down in the main description, includes 5th Gen 4Runner, Lexus GX460, FJ Cruiser – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD153 Rear Air Locker Toyota 12 Bolt Semi Float
- For Use With Toyota 12 Bolt Semi Float 30 Spline solid axle – used for many years in some rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75Â Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD142 Air Locker Toyota 12 Bolt Full Float
- For Use With Toyota 12 Bolt Full Float 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75Â Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons TOY-036-R Rear Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Heavy Load
- Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
- Gives 45-50mm lift with 300LBS+ of constant rear weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
(2 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons HJ47-7L-F Front Leaf Springs Pair for 1980+ FJ40 BJ40 35mm eyes
- Suits 1980+ Toyota Land Cruiser FJ40 BJ40 FJ45 HJ47 BJ45 BJ46 models with 35mm eyes
- Gives 45mm lift with 300LBS+ constant front end weight on a FJ40 and BJ40
- Gives 45mm lift stock weight on a FJ45 HJ47 BJ45 BJ46
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
(6 reviews) -
Hilux Revo (2016+)FREE SHIPPING
within 48 US StatesDobinsons 4×4 Snorkel Kit for Toyota Hilux Revo 2016+ 2.8L TDI Diesel
- Suits Toyota Hilux Revo 2016-2024+, Suits the wide body models only!!
- Made for the 2.8L TDI Diesel engine
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(9 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Tundra Snorkel SS56HF – Tundra 2014-2021
- Created to Fit 2014-2021 Toyota Tundra Models
- Safari V-Spec Snorkel
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(22 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Snorkel SS172HP – Toyota Tacoma 3rd Gen 2016-2023
- Suits Toyota Tacoma 2016-2023 Models – 3rd Gen Tacoma
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions
- Vehicle specific design and factory airbox adaption fitment
- Manufactured using durable, UV stable cross linked polyethylene material
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided
(23 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-317 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-317 6″ lift with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 560/570mm free height, 21mm wire, 303LBF/in rate
- Sold in Pairs
(17 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDirt King Heim UCA Pair with Uniballs | Tacoma Hilux Fortuner 2005-23
- Suits 2005-2023 Toyota Tacoma 2WD / 4WD, 2005-2015 Toyota Hilux Vigo 2WD / 4WD
- CAD designedÂ
- Boxed plate construction
- Utilizes American made FK bearings
- 4130 chromoly uniball cups
- Brushed stainless steel logo plates
- Preassembled for fast installation
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDirt King Heim UCA’s with Uniballs Pair – FJ Cruiser 4Runner GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- CAD designedÂ
- Boxed plate construction
- Utilizes American made FK bearings
- 4130 Chromoly uniball cups
- Brushed stainless steel logo plates
- Preassembled for fast installation
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Tacoma 2nd Gen (2005-2015)FREE SHIPPING
within 48 US StatesDirt King Performance Tacoma Lower Control Arms Pair for 2005-2015
- Suits 2005-2015 2nd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Armor
Dobinsons Front Deluxe Winch Bumper | Toyota Land Cruiser 200 Series 10/2015-2021
- Suits 10/2015-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(6 reviews) -
Coil Springs
Dobinsons C59-424 Front 1″ Coil Springs for Toyota Rav4 2006 to 2011 4Cyl – Pair
- Suits Toyota Rav4 from 2006 to 2011, ACA33 model with the 4 cylinder engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil spring pair
(18 reviews) -
Coil Springs
Dobinsons C59-425 Rear 1″ Coil Springs for Toyota Rav4 2006 to 2011 4Cyl – Pair
- Suits Toyota Rav4 from 2006 to 2011, ACA33 model with the 4 cylinder engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil spring pair
(15 reviews) -
Tacoma 1st Gen (1996-2004)FREE SHIPPING
within 48 US StatesDobinsons Rear Shocks for Toyota Tacoma 1998 to 2004
- Suits 1998 to 2004 Toyota Tacoma 4×4 Extra/Double Cab and 4×2 Prerunner Models
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
(9 reviews) -
Add-a-Leaf
Dobinsons 2″ Rear Lift Quick Ride Kit Toyota Tundra 2000 to 2021
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended – GS59-711
- Only to be used with OE height leaf springs
- Installation Instructions
(6 reviews)
