Your cart is currently empty!
Full Suspension Kits - Sequoia 1st Gen
Showing all 7 resultsSorted by popularity
-
Sequoia 1st Gen (2001-2007)Dobinsons 1.75-2.5″ Sequoia Suspension Kit for 2001-2007 4.7L V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- All 3 different Dobinsons shock types are available to choose from below
(9 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons 0-2.5″ Sequoia IMS Suspension Kit for 2001 to 2007 4.7L V8
- For Toyota Sequoia 2001 to 2007 models, lift 0-2.5″ depending on options chosen
- Adding preload with the adjustable height IMS struts gives you 2.5″ of lift, or set to the standard coil seat height for 1.75-2″ of lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged IMS Shocks, Superior Design, thicker walls, longer travel
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
(13 reviews) -
Sale!Pro Comp
Pro Comp 65175 2.5″ Leveling Kit – Sequoia 01-07 & Tundra 00-06
- Fits 2000 to 2006 Toyota Tundra
- Fits 2001 to 2007 Toyota Sequoia
- Level Lift Front Strut Spacers
- Includes Diff Drop Kit
- Lift Height: 2.5 Inch
- Max Tire Size: 32 Inch
- Easy to return to stock height
- View/Download Installation Instructions
- This item is on clearance and is not returnable
(9 reviews) -
Sequoia 1st Gen (2001-2007)
Dobinsons Stock Height Sequoia Suspension Kit for 2001 to 2007 4.7L V8
- Complete suspension kit for replacing the original Sequoia wearable suspension parts
- Coils are specifically suited to bring the ride height back up to original stock height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- New high performance IMS Monotube front and rear shock options are available to choose from
- If your vehicle has factory airbags in the rear, you’ll need to add the airbag conversion kit to run the new coil springs, option is below
(13 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA 0-2.5″ Sequoia Lift Kit | 2001-2007
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
- Additional optional parts can be added from the drop down menus
(6 reviews)
