Your cart is currently empty!
Tacoma
Showing 181–210 of 282 resultsSorted by popularity
-
Full Suspension Kits - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesFront +2″ Tacoma Long Travel Kit | Toyota Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 2WD and 4WD
- Adds 2.0″ of width to either side for a total of 4″ total track width added!!!
- 4WD requires long travel axle shafts or full axle assemblies
- 2” Wider Per Side: Adds 2” of width per side, boosting suspension travel by 25%.
- Stock Fender Compatibility: Works with stock fenders when using positive offset wheels.
- Aggressive Look Option: Supports zero or negative offset wheels with flared fenders.
- Extended Wheelbase: Allows proper fitment of 35” tires.
- SilentSpin Bushings: Greaseless bushings in upper control arms for low maintenance.
- Delrin Bushings with PTFE: Smooth operation in lower control arms with PTFE-infused Delrin.
- Heavy-Duty Moog Ball Joints: Reliable outer pivots with heavy-duty Moog ball joints.
- Aluminum Skid Plates: Replaceable skid plates protect lower arms on rough trails.
- Flexible Installation: Compatible with coilovers, coilovers with bypasses, or coilovers with bump stops.
- Aluminum Strike Pads: Designed for optimal bump stop engagement.
- Complete Hardware Included: Comes with all necessary mounting hardware.
- Made in the USA: Proudly designed and manufactured in the United States.
- What’s Included:
- Boxed plate upper control arms
- Boxed plate lower control arms
- 8″ quad wrapped limit straps
- Weld on adjustable limit strap mounts
- 17-4 stainless steel tie rod extensions
- DOT approved extended brake lines
- Grade 8 mounting hardware
- Billet aluminum bump stop strike pad
- Zinc plated bushing washers
- No coilovers or bump stops are included!!
- Installation instructions for 2005-2015 and 2016-2023
(0 reviews) -
Replacement BushingsOn Sale All November!!
Dobinsons Lower Shock Bushing – For -941
- Dobinsons replacement lower shock bushing
- Suits Dobinsons shock part number IMS59-50941 and MRA59-A941
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 shock
- High quality natural rubber bushing
- Photo is of actual bushing
- These do not suit GS59-940, IMS59-50940 or MRA59-A940, those use a different size bushing
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons Rear Adjustable Hydro Bump Stop Kit | Tundra Tacoma
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Tundra 2022+ and Toyota Tacoma 2024+ with coil spring rear end
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-027FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
(0 reviews) -
DobinsonsOn Sale All November!!
Dobinsons C59-822 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / 110-150lb Constant Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 19mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)Original price was: $270.00.$229.50Current price is: $229.50. Select options This product has multiple variants. The options may be chosen on the product page -
DobinsonsOn Sale All November!!
Dobinsons C59-820 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / Stock Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 18mm wire diameter, 485 LBF/in spring rate
- Sold in Pairs
(0 reviews)Original price was: $270.00.$229.50Current price is: $229.50. Select options This product has multiple variants. The options may be chosen on the product page -
Tacoma 4th Gen (2024+)On Sale All November!!ETA is Spring 2025
Dobinsons IMS59-60490 2.6″ IFP Front Struts Pair | 2024+ Tacoma
- Suits Toyota Tacoma 2024+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 251mm (9.9″)from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- New Dobinsons Strut Mounts should be run with these for strength and longevity
(0 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Rear Adjustable Panhard Rod for 2024+ Tacoma
- Suits Toyota Tacoma 2024+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(0 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.5 Tacoma DCA Remote Resi Shocks | 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Suits up to 1.5″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- What’s Included:
- 2.5 DCA shocks with remote reservoirs Pair
- Shock shaft boots
- Reservoir mounts
- All necessary mounting hardware
- Installation instructions
- Matching Front Coilovers
(4 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.5 Tacoma DCA Remote Resi Coilovers | 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Comes preset to 2.5″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.5 DCA coilover shocks with remote reservoirs Pair
- Coils installed are 14” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts with reservoir brackets
- Spanner wrench
- All necessary mounting hardware
- Installation instructions
- Installation video is down below
- Matching Rear Shocks
(4 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP Tacoma Mid Travel Package | Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Includes preassembled front Coilovers, Rear Shocks, and preassembled UCA’s
- Front comes preset to 2.5″ of lift with stock weight
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of front lift, rear shocks suit 1.5″ of lift
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.0 Dirt King IFP Series coilovers Pair
- Coils installed are 14” long, 700 LBF/in Spring Rate
- 2.0 Dirt King IPF Smooth Body Rear Shocks Pair
- Dirt King Tubular Ball Joint UCA’s
- Sway bar relocation mounts
- Spanner wrench to adjust height/preload
- All necessary mounting hardware
- Installation instructions
(7 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP Smooth Body Shocks Pair | Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 2WD and 4WD
- Allows for up to 1.5″ lift
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- What’s Included:
- 2.0” IFP smooth body shocks Pair
- Shock shaft boots
- All necessary mounting hardware
- Installation instructions
- Matching front coilovers
(4 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP Tacoma Coilovers Pair | Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Comes preset to 2.5″ of lift with stock weight
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.0 Dirt King IFP Series coilovers Pair
- Coils installed are 14” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts
- Spanner wrench to adjust height/preload
- All necessary mounting hardware
- Installation instructions
(4 reviews) -
Full Suspension Kits - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesFront Tacoma Long Travel Kit | Toyota Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 2WD and 4WD
- Adds 3.5″ of width to either side for a total of 7″ total track width added!!!
- 4WD requires long travel axle shafts or full axle assemblies
- Wheel Travel Specs, Tire Size and Shock recommendations are down below
- Bolt on application, minimal modifications required
- Utilizes American made FK bearings
- 4130 chromoly uniball cups
- Choice of ¾” heims or poly bushings for the UCA’s
- Delrin bushings for the LCA’s
- Zinc plated inner bushing sleeves
- Grease fittings for easy servicing
- 3/16″ and 1/8” boxed plate construction
- Internally ribbed with extrusions for weight reduction
- Bump stop plating
- Limit strap tabbing
- Bypass Tabbing
- To achieve the full amount of travel on 4WD models you must install a 1” diff drop kit and machine the inner CV’s for more articulation
- MADE IN THE USA
(7 reviews) -
Leaf Springs - Tacoma 1st Gen
OMESB121 Tacoma Leaf Spring Bushing Kit | 1998-2004 Tacoma
- Suits 1998-2004 Toyota Tacoma 4×4 and Prerunner
- 1 kit fits both ends of ONE leaf spring (the fixed end and the shackle end top and bottom)
- Each kit comes with as pictured
- Order 2 kits to replace the bushings in 2 leaf springs
- Polyurethane bushings with steel sleeves
- Color: Yellow
- Material: Polyurethane
- Includes Shackle Bushing: Yes
- Includes Spring Pad Bushings: Yes
- Includes Sleeve: Yes
- Includes Hardware: No
- Estimated Install Time (Hours): 2
(9 reviews) -
Leaf Springs - Tacoma 1st Gen
OME EL122RB 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RB – which is the sjhorter side and usually mounts onto the passenger side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 189 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
(11 reviews) -
Leaf Springs - Tacoma 1st Gen
OME EL122RA 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RA – which is the taller side and usually mounts onto the driver’s side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 204 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
(5 reviews) -
Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesLD TACT Truck Bed Tent – Mid-Size Truck 5.0FT Bed
- For Mid-Size Truck Beds measuring 5.0-5.2 FT in length
- For Vehicles such as Chevy Colorado, Ford Ranger, GMC Canyon, Nissan Frontier, Toyota Tacoma
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 3 sizes, 5FT, 5.5FT and 6.0FT Truck Beds
(3 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate IFS CV Axle Set | Tacoma 96-04 & 4Runner 96-02
- Suits Toyota 4Runner 1996-2002, Toyota Tacoma 1995.5-2004, Toyota Hilux Surf 1996-2002, Toyota Prado 90 Series 1996-2002
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Does NOT fit manual locking hub versions
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota Tacoma and 4Runner IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by .8415″ balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 30 spline 4340
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
(9 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1-inch balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 35 spline 300M, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
(9 reviews) -
Sale!On BackorderDobinsonsOn Sale All November!!ETA is late December
Dobinsons UCA Ball Joint for Tacoma Hilux and Fortuner
- Suits Dobinsons UCA’s that fit Toyota Tacoma 2nd and 3rd Gen, Toyota Fortuner 2005-2023, Toyota Hilux 2005-2023
- This ball joint will fit UCA part numbers UCA59-003K, UCA59-203K
- Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Sold individually
- Includes new ball joint, boot, split pin and nut (subject to design changes)
(6 reviews) -
Tacoma 1st Gen (1996-2004)On Sale All November!!
Tacoma 2.7L Exhaust Header – 1995-1998 Toyota Tacoma 2.7L 4 Cylinder
- Suits Toyota Tacoma 2.7L 4 Cylinder from 1995 to 1998
- Polished, 1/16” thick stainless steel tubes going into a ½” thick header-to-head mounting flange
- TIG welded and polished
- Comes with all gaskets and hardware
- Stainless steel full-band exhaust clamp
- Smog legal in California, making it legal in all 50 states
- Installation Instructions
(9 reviews) -
MRA Remote Resi 3-Way Adjustable MonotubeFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 2.6″ 3-Way Adjustable Front Long Travel Coilovers Pair | Toyota & Lexus
- Dobinsons Long Travel Coilovers for the front of Toyota and Lexus Trucks and SUV’s
- Intended to be used on 4th and 5th Gen 4Runners, Lexus GX470 and GX460, FJ Cruisers, and Toyota Tacoma 2nd and 3rd Gens – with all Long Travel Parts Installed (upper and lower arms, axles, custom bump stops, limit straps, etc)
- Includes Different bolt pattern adapters for Top mount plate
- Specifications: 602mm (23.7″) extended, 399 mm (15.7″) compressed, uses 1.5″ long x 1/2″ Bolt for lower mounting
- Pair of Coilover Struts only, no coils included
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Does not include coil springs – sold separately
- These can only be run with aftermarket UCA’s for coilover clearance and full long travel lower arms – they will not work with OEM sized upper or lower arms
- Recommended Coils to run with these:
- C92-3016550 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 550lb/in
- C92-3016600 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 600lb/in
- C92-3016650 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 650lb/in
(9 reviews)