Tacoma 1st Gen (1996-2004)

Showing 1–30 of 50 resultsSorted by popularity

Full Suspension Kits - Tacoma 1st Gen (7)
Struts + Shocks - Tacoma 1st Gen (1)
Coil Springs - Tacoma 1st Gen (5)
Control Arms - Tacoma 1st Gen (2)
Leaf Springs - Tacoma 1st Gen (9)
Bed Racks - Tacoma 1st Gen (5)
Skid Plates - Tacoma 1st Gen (4)
Sale!
4Runner 3rd Gen (1996-2002)
On Sale All November!!
Dobinsons PS59-4030 1/2″ Lift Alloy Strut Top Mount Spacer | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits various vehicles, as listed below
- Dobinsons PS59-4030 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Fits between the strut top mount and the chassis of the vehicle
- Note: See 2nd photo to make sure you have enough threads left to install the spacer. This vehicle came with short studs that don’t allow the spacer to be installed without changing out to thicker studs
Rated 5.00 out of 5
(12 reviews)
Original price was: $55.00.Current price is: $46.75. Add to cart
Sale!
Tacoma 3rd Gen (2016-2023)
On Sale All November!!
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 1998-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
Rated 5.00 out of 5
(10 reviews)
Original price was: $90.00.Current price is: $76.50. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons IMS59-50222 Extended Travel Front 2.2″ IFP Struts Pair | Tacoma 4Runner Tundra Sequoia
- Suits 1996-2002 3rd Gen 4Runner, 1996-2004 1st Gen Tacoma, 2000-2006 Toyota Tundra, 2001-2007 Toyota Sequoia, Toyota Prado 90
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Extended Travel
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Standard coil seat height is 164mm
- Struts only, sold as a pair – the coils are sold separately
- 473mm extended, 335mm compressed lengths
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel and a diff drop kit
- Note: Anyone lifting over 2″ shock install the included droop spacer, as pictured, and run a diff drop kit and UCA’s
Rated 5.00 out of 5
(13 reviews)
Original price was: $650.00.Current price is: $552.50. Add to cart
Sale!
4Runner 3rd Gen (1996-2002)
On Sale All November!!
Dobinsons SC59-002 Pair of Strut Top Plates | Tacoma 98-04 + 4Runner 96-02
- Suits Toyota Tacoma 1st Gen 1998-2004, 4Runner 3rd Gen 1996 to 2002, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Photo is of actual product and parts included
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Assembly Instructions
Rated 5.00 out of 5
(9 reviews)
Original price was: $120.00.Current price is: $102.00. Add to cart
Sale!
4Runner 3rd Gen (1996-2002)
On Sale All November!!
Dobinsons GS59-222 Struts for 4Runner 96-02 Tacoma 98-04 Sequoia 01-07 Tundra 00-06
- Suits 3rd Gen 4Runner, 1st Gen Tacoma, 1st Gen Tundra, 1st Gen Sequoia, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 465mm extended, 335mm compressed
- Sold in Pairs
(0 reviews)
Original price was: $350.00.Current price is: $297.50. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons IMS59-50649 2.2″ IFP Rear Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
- Should be run with a suspension lift of 1.75″ or more
Rated 5.00 out of 5
(15 reviews)
Original price was: $580.00.Current price is: $493.00. Add to cart
Sale!
Coil Springs
On Sale All November!!
Dobinsons C59-276 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair Teal
- 3rd Gen 4Runner 4×4 (1996-2002) – Lifts 2″ on a stock to medium load front end
- Toyota Tacoma 4×4 1998 to 2004 – 1.5″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- 362mm free height, 586LBF/in spring rate
- Sold in Pairs
- Also offered in Black Powder Coat
Rated 5.00 out of 5
(18 reviews)
Original price was: $270.00.Current price is: $229.50. Add to cart
Sale!
Suspension
On Sale All November!!
Dobinsons GS59-649 Rear Twin Tube Shocks Pair – Comfort Option
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- GS59-649 is a comfort version (softer) of the GS59-651
  
  See full vehicle list below for fitment
- 591mm extended, 363mm compressed, 51mm body diameter
Rated 5.00 out of 5
(9 reviews)
Original price was: $310.00.Current price is: $263.50. Add to cart
Sale!
Suspension
On Sale All November!!
Dobinsons C59-134 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 370mm free height, 17mm wire thickness, 586LBF/in spring rate
Rated 5.00 out of 5
(4 reviews)
Original price was: $270.00.Current price is: $229.50.
Coil Color Clear

Dobinsons C59-134 Front Lifted Coil Springs for Toyota 4x4 Trucks and SUV's - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Replacement Bushings
On Sale All November!!
Dobinsons Lower Strut Bushing – For -222 -220 -221 -782 -470
- Dobinsons replacement lower strut bushing
- Suits a variety of Dobinsons struts/shocks, part numbers ending in -222 -220 -221 -782 -470
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
(0 reviews)
Original price was: $20.00.Current price is: $17.00. Add to cart
Sale!
Suspension
On Sale All November!!
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
Rated 5.00 out of 5
(7 reviews)
Original price was: $165.00.Current price is: $140.25. Add to cart
Sale!
Add-a-Leaf
On Sale All November!!
Wheeler’s 3 Leaf Progressive Add-A-Leaf Set – 1.5″ Lift | 95-23 Tacoma 99-06 Tundra
- Suits 1995-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Includes 2 x Progressive add-a-leaf sets (3 leaves each), 2 longer center pins and replacement longer U-bolts
- Adds 1.5″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm diamond cut ends and anti-friction pads for smooth, squeak free performance
- On some years and/or models, you may need to remove the front clamp from the Add-A-Leaf to avoid interference with the overload spring and gas tank strap
- Instructions
Rated 5.00 out of 5
(6 reviews)
Original price was: $208.00.Current price is: $176.80. Add to cart
Sale!
Suspension
On Sale All November!!
Dobinsons 30mm (1.2″) Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only designed to be used with OE height leaf springs
- Built-in correction for pinion angle
- Full vehicle range is listed down below
- Installation Instructions
Rated 5.00 out of 5
(7 reviews)
Original price was: $165.00.Current price is: $140.25. Add to cart
Sale!
Trail-Gear
On Sale All November!!
TG Diff Drop Kit – 95-04 Tacoma 96-02 4Runner 00-06 Tundra
- Solid aircraft-grade 6061-T6 aluminum spacers
- Zinc-plated Grade 8 hardware
- Aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skid plate down
- Fits the following applications:
  
  Toyota Tacoma 1995-2004 (4×4)
  
  Toyota Tundra 2000-2006 (4×4)
  
  Toyota 4Runner 1996-2002 (4×4)
  
  Toyota Sequoia 2000-2006 (4×4)
  
  Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Made in USA
Rated 5.00 out of 5
(9 reviews)
Original price was: $57.00.Current price is: $48.45. Add to cart
Sale!
Suspension
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons MRA59-A649 3-Way Adjustable Rear Shocks Pair for Toyota
- Suits various vehicles, list is down below
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- 626mm extended, 400mm compressed
- 22mm / 7/8″ shaft diameter
- Full 2 year limited warranty, no set rebuild time period
- Should be run with a suspension lift of 1.75″ or more
Rated 5.00 out of 5
(15 reviews)
Original price was: $1,150.00.Current price is: $977.50. Add to cart
Sale!
Dobinsons
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons MRA59-A222 3-Way Adjustable MRA Extended Travel Front Struts Pair
- Suits 2001-2007 Toyota Sequoia 4×4, 1998-2004 Toyota Tacoma 4×4, 2000-2006 Toyota Tundra 4×4, 1996-2002 Toyota 4Runner 4×4
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- 458mm extended length, 335mm compressed
- Standard coil seat height is 164mm
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
Rated 5.00 out of 5
(15 reviews)
Original price was: $1,280.00.Current price is: $1,088.00. Add to cart
SPC
FREE SHIPPING
within 48 US States
Take 10% off with Coupon
Code "BLACKFRIDAY"!!
SPC 25460 | UCA’s for Tacoma 98-04 & 4Runner 96-02 Pair
- Suits Toyota Tacoma 1998-2004 & 4Runner 1996-2002
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
Rated 5.00 out of 5
(13 reviews)
$795.95 Add to cart
Sale!
Tacoma 1st Gen (1996-2004)
On Sale All November!!
Dobinsons 2-2.5″ Pre-Assembled IMS Tacoma Coilovers for 1998-2004
- Suits 1998-2004 Toyota Tacoma 4×4 Models
- Looking for a quick and easy way to lift your Tacoma? This is your answer
- Extended Travel IMS59-50222 Coilovers – 473mm extended, 335mm compressed lengths
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
- Link to Matching rear shocks, regular travel, or long travel
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(4 reviews)
Original price was: $1,165.00.Current price is: $1,009.00. Select options
Sale!
Upper Control Arms
FREE SHIPPING
within 48 US States
On Sale All November!!
Icon Tubular UCA DJ Pair for 96-02 4Runner + 95-04 Tacoma
- Suits 1996-2002 Toyota 4Runner and 1995-2004 Toyota Tacoma 4×4 (6 lug models)
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Direct bolt-in design makes for a simple and straightforward installation
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- CNC machined steel taper adapter
- 1026 DOM steel construction
- CNC bent and notched tubing
- Serviceable dual stage bushings
- CNC machined bushing housings and sleeves
- Built-In caster correction
- Black semi-gloss powder coat finish
- Delta Joint upper control arms carry ICON’s exclusive 5 year limited warranty when used in a complete ICON suspension system
- Installation Guide
- Warranty Info
Rated 5.00 out of 5
(7 reviews)
Original price was: $849.95.Current price is: $722.00. Add to cart
Sale!
Bump Stops
On Sale All November!!
Wheeler’s Rear Superbumps for 95-23 Tacoma and 99-06 Tundra
- Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), goes under the factory u-bolts
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Installation Instructions
Rated 5.00 out of 5
(9 reviews)
Original price was: $216.00.Current price is: $183.60. Add to cart
Sale!
All Pro Offroad
FREE SHIPPING
within 48 US States
On Sale All November!!
All Pro Complete CV Boot Kit | Toyota Tacoma 1995-2004
- Complete CV boot replacement kit – Suits 1995-2004 Toyota Tacoma 4×4 trucks
- Includes inner and outer CV boots and all related clamps.
- Qty 2 – Long Travel Neoprene Outer CV Boots (can be used on regular or long travel axles)
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
Rated 4.96 out of 5
(25 reviews)
Original price was: $160.00.Current price is: $136.00. Add to cart
Sale!
Tacoma 1st Gen (1996-2004)
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons 2-2.5″ 3-Way Adjustable MRA Tacoma Coilovers for 1998-2004
- Suits 1998-2004 Toyota Tacoma 4×4 Models
- Looking for a quick and easy way to lift your Tacoma? This is your answer
- Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(2 reviews)
Original price was: $1,795.00.Current price is: $1,544.50. Select options
Sale!
Dobinsons
On Sale All November!!
Dobinsons IMS59-50229 Monotube 2.2″ IFP Rear Shocks Pair
- Suits the rear of Toyota Hilux Revo 2016+ and Toyota Tacoma 1998-2004 (for long travel)
- For the Tacoma, these are considered long travel shocks for maximum droop. Additional parts may be required to get that travel out of the truck, such as bump stop extensions, longer brake lines, etc
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Dobinsons IMS59-50229 Specifications: 650mm extended, 416mm compressed, 56mm body size
Rated 5.00 out of 5
(11 reviews)
Original price was: $580.00.Current price is: $493.00. Add to cart
Sale!
Roof Racks
On Sale All November!!
RCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
  
  5ft (46″) 86lbs
  
  5ft6in(52″) 92lbs
  
  6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
Rated 5.00 out of 5
(2 reviews)
Original price was: $609.99.Current price is: $518.00. Select options
Sale!
Tacoma 1st Gen (1996-2004)
On Sale All November!!
Dobinsons 1.5-2.0″ IMS Lift Kit Toyota Tacoma 1998 to 2004 with Blocks or AAL
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully re-buildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(9 reviews)
Original price was: $1,500.00.Current price is: $1,275.00. Select options
Sale!
Tacoma 1st Gen (1996-2004)
On Sale All November!!
Dobinsons 1.5″ to 2.0″ Front Coils for Toyota Tacoma 1998 to 2004
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Coil springs are sold as a pair, powder coated teal
- C59-276 – 1.5″ with stock weight
- C59-134 – 1.5″ with bumper and winch
- C59-134 – 2.0″ with stock weight
Rated 5.00 out of 5
(10 reviews)
Original price was: $270.00.Current price is: $229.50. Select options
Sale!
Tacoma 1st Gen (1996-2004)
On Sale All November!!
Dobinsons 1.5-2.0″ Lift Kit Toyota Tacoma 1998-2004 with Blocks or AAL
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- Option now to use Wheeler’s add-a-leaf kit instead of blocks if you’d prefer
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(9 reviews)
Original price was: $930.00.Current price is: $790.50. Select options
Sale!
Accessories
On Sale All November!!
Dobinsons Pickup Rear Drawers Kit with Fridge Slide 39x51x10″
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
Rated 5.00 out of 5
(12 reviews)
Original price was: $1,845.00.Current price is: $1,568.25. Select options
Sale!
Coil Springs
On Sale All November!!
Dobinsons C59-276B Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair Black
- 3rd Gen 4Runner 4×4 (1996-2002) – Lifts 2″ on a stock to medium load front end
- Toyota Tacoma 4×4 1998 to 2004 – 1.5″ with stock weight
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 362mm free height, 586LBF/in spring rate
- Sold in Pairs
- Also offered in the Teal color
(0 reviews)
Original price was: $270.00.Current price is: $229.50. Add to cart
Sale!
4Runner 3rd Gen (1996-2002)
On Sale All November!!
RCI Transmission Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma V6 and 4×4 Models ONLY
- Protects transmission and second and third cross-members
- Built with laser cut 3/16″ steel
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide ANY coverage of transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- V6 and 4×4 Models ONLY – does not fit 4 cylinder models or 2 wheel drive
- Made in the USA.
Rated 5.00 out of 5
(2 reviews)
Original price was: $249.99.Current price is: $212.00. Add to cart