Your cart is currently empty!
hydro
Showing all 10 resultsSorted by popularity
-
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Front Adjustable Hydro Bump Stop Kit | Toyota 80 Series Land Cruiser 1990-97
- Complete Front hydro bump stop kit to replace the factory coil isolator and internal bump stops
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-012FK Mounting Kit
- HBS56-009 or HBS56-006 Hydraulic Bump Stops (choose below)
- HBS56-009 – 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- HBS56-006 – 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- Use Cases:
- HBS59-009 – Use if your shocks Compressed Length is between 382mm (15″) – 390mm (15.35″) – Usually 0-3″ Lift Length Shocks
- HBS59-006 – Use if your shocks Compressed Length is between 390mm (15.35″) – 467mm (18.38″) – For 4″ Lift Length Shocks or longer
(9 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | Toyota 80 Series Land Cruiser 1990-1997
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-019FK Mounting Kit
- HBS56-009 or HBS56-006 Hydraulic Bump Stops (choose below)
- HBS56-009 – 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- HBS56-006 – 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- Use Cases:
- HBS59-009 – Use if your shocks Compressed Length is between 382mm (15″) – 390mm (15.35″) – Usually 0-3″ Lift Length Shocks
- HBS59-006 – Use if your shocks Compressed Length is between 390mm (15.35″) – 467mm (18.38″) – For 4″ Lift Length Shocks or longer
- Installation Instructions
(7 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | LC 200 250 300 Sequoia GX550
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 and 2022+ Land Cruiser 300 Series, 2024+ Land Cruiser 250 Series, Lexus GX550, and 2023+ Toyota Sequoia
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-013FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.2″ Bump Stops – 2.0″ Stroke, 9.4″ Extended (Pair) – HBS56-006
- HBS56-006 – 56mm (2.2″) body | 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
- Photo attached shows these bump stops installed with the weld-on mounts
(4 reviews) -
Bump Stops - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | Tundra 2007-2021
- Suits the Rear of Toyota Tundra 2007 to 2021
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit and 2 hydro bump stops
- Kit Includes:
- HBS59-017FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | Toyota Tundra Tacoma
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Tundra 2022-2025+ and Toyota Tacoma 2024-2025+ with coil spring rear end
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-027FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
(0 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
(0 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.2″ Bump Stops – 1.8″ Stroke, 7.4″ Extended (Pair) – HBS56-009
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
- Photo attached shows these bump stops installed with the weld-on mounts
(0 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.6″ Bump Stops – 2.25″ Stroke, 12″ Extended (Pair) HBS66-002
- HBS66-002 – 57mm – 2.25″ Stroke, 185mm – 7.28″ Thread Length, 305mm – 12″ Extended Length, 248mm – 9.75″ Compressed Length
- CNC Machined 60mm Billet Aluminum Piston
- EDP Coated 3mm Thick 66mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 40mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
(10 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.2″ Bump Stops – 2″ Stroke, 10.75″ Extended (Pair) HBS56-001
- HBS56-001 – 50mm – 2″ Stroke, 145mm – 5.7 Thread Length, 273mm – 10.75″ Extended Length, 223mm – 8.75″ Compressed Length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
(6 reviews)
