Your cart is currently empty!
Shop
Showing 481–510 of 2002 resultsSorted by popularity
-
BilsteinBilstein 33-230337 – 5125 Series Rear Shock | 2005-2023 Tacoma
- Suits 2005-2023 Toyota Tacoma 4×4, with 2-3.5″ of lift
- Suits 2-3.5″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 24.38 Inch
- Compressed Length (IN): 15.01 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: Yes
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
- Recommended to run with extended brake lines and extended bump stops
(3 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A687 2.6″ 3-Way Adjustable Rear Shocks Pair | Tundra 2022+
- Suits 2022-2025+ Toyota Tundra Rear with 1.0-3.0″ of Lift
- Recommended for constant load rear ends, these shocks have HD valving
- If you run your truck empty or with light loads, check out MRA59-A887 instead
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
(15 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser 1990-1997
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-019FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews) -
Full Suspension Kits - FJC EarlyFREE SHIPPING
within 48 US StatesDobinsons 1.5-3.5″ Pre-Assembled IMS FJ Cruiser Coilovers for 2006-2009
- Suits Toyota FJ Cruisers from 2003-2009 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and load rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(4 reviews) -
Tacoma 1st Gen (1996-2004)FREE SHIPPING
within 48 US StatesDobinsons 2-2.5″ Pre-Assembled IMS Tacoma Coilovers for 1998-2004
- Suits 1998-2004 Toyota Tacoma 4×4 Models
- Looking for a quick and easy way to lift your Tacoma? This is your answer
- Extended Travel IMS59-50222 Coilovers – 473mm extended, 335mm compressed lengths
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
- Link to Matching rear shocks, regular travel, or long travel
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(4 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | Nissan Frontier Xterra Pathfinder
- Super strong billet aluminum front upper control arms (UCA’s) for Nissan D40 and D41 platforms
- Suits 2005-2021 Nissan Frontier, 2022-Present Nissan Frontier, 2005-2015 Nissan Xterra, 2005-2012 Nissan Pathfinder R51
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Includes detailed instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
(6 reviews) -
Sale!AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 180° Awning – Dark Gray With Black Bag
Features:
- 88 Square Feet of Freestanding Covered Shelter
- 600D Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover
- 10 Lb Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
- Can mount to driver or passenger side of vehicle
What’s included:
- 180 Degree Awning With 4 Built-In Aluminum Rafters
- 3 Pivoting and Telescoping Aluminum Poles + 2 Telescoping Aluminum Poles
- 4 Sets of Shock Cord
- 4 Heavy Duty Stakes
- Travel Cover
- 3 Heavy Duty Mounting Brackets and Hardware
- Nylon Reinforced Tie Down Kit
- Opened: 240 x 78.5 Inch
- Closed: 88 x 7 x 6 Inch
- Download Instructions
(8 reviews) -
Dobinsons
Dobinsons HJ60-7L-R Rear Medium Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with stock rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
(2 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-634 Front Twin Tube Long Travel Shocks Pair | 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights, and 1994+ RJ70, RJ73, KZJ70, KZJ71, KZJ73 with Square Headlights, and LJ78, LJ79, RJ77, KZJ78
- For 2.5″ of lift only
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
(8 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-288 1.75″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Teal
- Dobinsons C59-288 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96 1.75″ with bumper OR winch weight of 110lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(7 reviews) -
Sale!Accessories
RCI 5th Gen 4Runner Full Length Aluminum Roof Rack 2010-2024
- RCI 5th Gen 4Runner Full Length Aluminum Roof Rack – suits 2010-2024 models
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, roto-pax, spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is the only one on the market that utilizes injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes and rubber load bearing pads at front of rack.
- Rack is only 3″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs ONLY 54lbs
- Made in the USA
(3 reviews) -
Add-a-Leaf
Wheeler’s 2.0″ Lift Add-A-Leaf Set for 2005-2023 Tacoma
- Suits 2005-2015 and 2016+ Tacoma 4×4 and Pre-Runner
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 2.0″ of lift approximately on dual cab short bed models. Long bed models won’t see as much lift
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm width, diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(10 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Tundra 2.25-3.0″ IMS Suspension Kit for 2007-2021 Double Cab 4×4 V8
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Photos show full kit with most options purchased – choose what you’d like
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- IMS struts – Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-310 Front Coil Springs | Land Cruiser 80 series 6.0″ Lift with 220LBS – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-310 are Front Linear rate coils to give 6.0″ of lift with 220 LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 575/585mm free height, 20mm wire, 333LBF/in rate
- Sold in Pairs
(17 reviews) -
Sale!GX460 (2010-2023)
RCI Rock Sliders | Lexus GX460 2010-2023
- Suits Lexus GX460 2010-2023
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate provides up to 15 mounting points on each side of the vehicle, guaranteeing a slider as strong or stronger than anything else on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard with 20 degree upward angle, creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Made to order from your selections below
- Made in USA
(5 reviews) -
Suspension
Dobinsons PB59-1033K Rear Greasable Poly Bush Kit for Toyota 1979-1989
- Suits Toyota 4Runner and Pickup 1979-1989 with leaf springs in the rear
- NOTE: Check Shank & Locating Bolt On Pin Flange Plate before ordering!!
- For any lift height, or no lift. These are OE replacement bushings
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Photo not of actual bushings supplied in kit
(4 reviews) -
60 62 Series Land Cruiser (1980-1989)
Dobinsons 60 Series Drawers for Toyota Land Cruiser 1980-1990
- Suits FJ60 and FJ62 Land Cruiser models from 1980-1990
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide, 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive Optional universal outer wing trim kit to provide a factory fit
- Aluminum Edging Protection
- Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Axle-End Radius Arms Bushings Kit, OE Rubber Replacement Land Cruiser 80 Series 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- For any lift height, or no lift. These are OE replacement rubber bushings.
- High quality rubber, producing the highest ride quality
- Pressing of bushings is required during installation
- Replaces OE bushings holding front radius arms to the axle in all 4 positions
(8 reviews) -
Rear BumpersFREE SHIPPING
within 48 US StatesDobinsons 60 Series Rear Bumper with Tire + Jerry Can Carrier FJ60 FJ62 Series 9/1985+
- Late-1985 and onwards models only due to rear cross member difference. Using it on an earlier model will require customization on customer’s end
- The earlier model frames are not as wide as the later model, so you’ll have to make fill-in pieces for proper fitment
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included. Now includes twin jerry can holder
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-308 Front Coil Springs | Land Cruiser 80 Series 4.0″ Lift 110-160LBS Load – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-308 are Front Linear rate coils to give 4.0″ of lift with 110 to 160 LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 555/565mm free height, 19mm wire, 276LBF/in spring rate
- Sold in Pairs
(14 reviews) -
Recovery
Dobinsons 4×4 Tree Trunk Protector Strap for Winching 26000 LB (12000 KG)
- Rated at 26,000 LB (12,000KG)
- Length is 10FT (3M), and 3″ Strap Thickness
- Green in color to not confuse with Snatch Straps
- Rolls up small, compact, and easy to keep in the vehicle
(9 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesApache Offroad 2″ Rear Bump Stop Extensions | 4Runner FJ Cruiser GX470 GX460
- Apache Offroad 2″ Rear Offset Bump Stop Extensions are required for rear long travel applications
- Prevents the shock from limiting out during up travel and damaging the shock, thus shortening its life
- Our 2″ extensions allow for maximum travel and are offset to allow for the use of larger tires without rubbing, as they are prone to do in the factory location
- They also reposition the bump stop to account for correct alignment with your long travel suspension
- Fabricated out of 3/16″ steel and powder coated black.
- Grade 8 Mounting Hardware Included
- Sold as a pair, 1 per vehicle needed
- Use with OEM bump stops or aftermarket ones, depending on how much you need to limit your up travel
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesApache Offroad HD Chromoly Rear Adjustable Sway Bar Links | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Adjustable (on vehicle) from 165mm – 206mm – Suits standard and long travel rear lifts
- Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
- Premium Silicone Dust Boots
- High Carbon Steel Center Link
- Black EDP Coating for corrosion resistance
- High Quality Polyurethane Bushings on frame side
- Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install
- Mounting hardware included
- Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation
- Sold as a pair
- Maintenance Free Design
- 2 year unlimited mile warranty
(10 reviews) -
Bronco (2021-2025+)
Dobinsons Ford Bronco Sway Bar Relocation Bracket Kit
- Suits 2021+ Ford Bronco 2-door and 4-door models (not Bronco Sport)
- Lowers stock front sway bar for better working angle and clearance
- Includes machined aluminum spacers
- Easy bolt-on installation
- Includes new correct grade longer hardware
- Recommended for lift heights of 2″ or more to correct sway bar operating angle
- Installation Instructions
(2 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro 2014-2024 4Runner Windshield Washer Bottle Skid – Raw Steel
- Great addition to your 2014-2024 4Runner if you’ve added a high clearance cut to the side and have left your washer bottle exposed
- Recommended to be added when using the All Pro High Clearance Side Supports
- Can be used with any aftermarket bumper, easily attaches to the body mount
- Made of 11 GA steel
- Washer Bottle Skid Comes as RAW STEEL, you will need to paint or powder coat it when you receive it
- Easy bolt-on installation
- Weighs 3lbs
- BUILT 100% IN THE USA!!
- NOTE: Not compatible with Limited Edition 4Runners
- Installation Instructions
- Also available already powder coated
(7 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | 07-21 Tundra and 08-22 Sequoia
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
(12 reviews) -
Rear Drawers
Dobinsons DW59-022K Wing Side Panel Kit for 80 Series LX450 1990-1997
- Suits Toyota Land Cruiser 80 Series 1990-1997 or Lexus LX450
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
Brake LinesFREE SHIPPING
within 48 US States80 Series Extended Brake Line Kit for 1991-1992 ONLY – for 0-4″ lift
- Suits 1991 to 1992 80 Series Land Cruisers ONLY
- Extended brake line kit to suit lift heights of up to 4″ of lift ONLY
- Extruded PTFE (Teflon) Hose with Braided Stainless Steel Cover and Clear PVC Outer Jacket
- Permanently Crimped Zinc-Plated Fittings
- Includes 1 front and 1 rear extended brake line
- Includes Retention Clips
- Meets DOT MVSS-106
- Always compare stock brake lines and fittings to the new ones before disconnecting the old lines
- Instructions
(35 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesTax Return Sale, 10% off
Use Coupon TAXTIMEIcon Tubular UCA DJ Pro Pair for 22-25 Tundra + 23-25 Sequoia
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Installation Guide
- Warranty Info
(11 reviews) -
Coil Springs - 4th Gen 4Runner
Dobinsons Front Coil Spring Options for V6 Toyota 4th Gen 4Runner 2003-2009 – Pair
- THIS IS FOR V6 ENGINE 4X4 MODELS ONLY – V8 models use a different set of specs
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- All specs are listed for 4×4 models. 2WD models lift about 1″ more due to less weight
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 3/4″ to 1″
- C59-296 – Stock front end, 1.5″ lift
- C59-300 – Stock front end, 1.75-2.0″ lift
- C59-302 – Stock – 2.5″ | with 110-150lbs – 2″
- C59-314 – Stock – 3″ | with 110-220lbs – 2.5″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 220-300lbs – 2″ | Heavy rate coils
- C59-354 – With 220-300lbs – 2.5″ | Heavy rate coils
(13 reviews)
