Shop

Showing 961–990 of 1945 resultsSorted by popularity

Sale!
All Pro Offroad
FREE SHIPPING
within 48 US States
On Sale All November!!
2005-2023 Tacoma Transmission Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Does not fit 2WD Pre-Runner or 2.7L Automatic Single Cab Tacoma
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Made in USA
- Requires All-Pro IFS Skid Plate
Rated 4.57 out of 5
(7 reviews)
Original price was: $145.00.Current price is: $123.25. Add to cart
Sale!
Front Bumpers
FREE SHIPPING
within 48 US States
On Sale All November!!
2016-23 Tacoma Steel Low Profile Front Bumper – Center Hoop
- Suits 2016-2023 Toyota Tacoma
- Ships in bare steel. You powder coat or paint it after you receive it
- This design allows you to keep the look of the OEM bumper while adding new high-quality features
- This bumper provides an increased approach angle in the front
- Made from a CNC laser cut, brake-formed, 3/16″ steel faceplate and the 1/4″ steel winch plate
- We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
- It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
- This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
- Made in the USA
- Installation Instructions
- Also available without the center hoop attached
Rated 4.71 out of 5
(7 reviews)
Original price was: $779.00.Current price is: $662.15. Add to cart
On Backorder
TJ Wrangler (1996-2006)
FREE SHIPPING
within 48 US States
King 4WD Premium TJ Wrangler Soft Top w/All Tinted Windows
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (not LJ Unlimited)
- Includes full soft top with upper half door windows – ALL WINDOWS ARE TINTED
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint on rear windows and TINTED front door windows
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
Rated 5.00 out of 5
(10 reviews)
$279.99 Add to cart
Front Bumpers
WARN 102146 Full Width Crawler Front Winch Bumper for JK JL & JT
- Suits Jeep Wrangler JK 2007-2017, Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned On Top Of Bumper For Easy Mounting And Access
- Standard Rock Crawler Front Bumper Features Pre-Drilled Holes For Auxiliary Lights
- Features Recessed Jack Points For Increased Recovery Options
- Has Recessed Ports And Mounts For Factory Or Auxiliary Lights
- Optional skid plate for further front-end protection, 101445
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: Yes
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Ring Mounts
- With Light Cutouts: Yes
- Light Type: Lights – Sold Separately
- With Mounting Hardware: Yes
- With Skid Plate: No, optional
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
Rated 5.00 out of 5
(4 reviews)
$805.00 Read more
Sale!
Performance Upgrades - Lexus GX460
FREE SHIPPING
within 48 US States
On Sale All November!!
Powerbrake D-Line HP Rotor and Pad Kit | Lexus GX460 Rear
- Suits Lexus GX460 2010-2023 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
  
  Rotors are cast from a proprietary high carbon cast-iron alloy.
  
  Rotors are machined to tolerances up to three times tighter than the industry norm.
  
  All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
  
  Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
  
  Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
  
  Matched high friction PB05 brake pads take the guesswork out of pad selection.
  
  Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
  
  Reduced stopping distances in both wet and dry conditions.
  
  Reduced brake fade and improved brake consistency.
  
  Improved initial brake response (bite).
  
  Improved brake modulation particularly during emergency stops.
  
  Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
  
  2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
  
  An axle set of matched PB05 high-performance brake pads – Made in Japan.
  
  Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
Rated 5.00 out of 5
(5 reviews)
Original price was: $840.00.Current price is: $714.00. Add to cart
Sale!
Performance Upgrades - 4th Gen 4Runner
FREE SHIPPING
within 48 US States
On Sale All November!!
Powerbrake D-Line HP Rotor and Pad Kit | 4Runner 03-09 Rear
- Suits Toyota 4Runner 4th Gen 2003-2009 Rear
- Powerbrake D-Line Features
  
  Rotors are cast from a proprietary high carbon cast-iron alloy.
  
  Rotors are machined to tolerances up to three times tighter than the industry norm.
  
  All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
  
  Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
  
  Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
  
  Matched high friction PB05 brake pads take the guesswork out of pad selection.
  
  Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
  
  Reduced stopping distances in both wet and dry conditions.
  
  Reduced brake fade and improved brake consistency.
  
  Improved initial brake response (bite).
  
  Improved brake modulation particularly during emergency stops.
  
  Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
  
  2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
  
  An axle set of matched PB05 high-performance brake pads – Made in Japan.
  
  Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
Rated 5.00 out of 5
(9 reviews)
Original price was: $810.00.Current price is: $689.00. Add to cart
Sale!
Performance Upgrades - 100 Series
FREE SHIPPING
within 48 US States
On Sale All November!!
Powerbrake D-Line HP Rotor and Pad Kit | 100 Series Front
- Suits Toyota Land Cruiser 100 Series 1998-2007 Front and Lexus LX470 1998-2007 Front
- Powerbrake D-Line Features
  
  Rotors are cast from a proprietary high carbon cast-iron alloy.
  
  Rotors are machined to tolerances up to three times tighter than the industry norm.
  
  All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
  
  Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
  
  Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
  
  Matched high friction PB05 brake pads take the guesswork out of pad selection.
  
  Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
  
  Reduced stopping distances in both wet and dry conditions.
  
  Reduced brake fade and improved brake consistency.
  
  Improved initial brake response (bite).
  
  Improved brake modulation particularly during emergency stops.
  
  Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
  
  2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
  
  An axle set of matched PB05 high-performance brake pads – Made in Japan.
  
  Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
Rated 5.00 out of 5
(3 reviews)
Original price was: $810.00.Current price is: $689.00. Add to cart
Sale!
Performance Upgrades - 80 Series
FREE SHIPPING
within 48 US States
On Sale All November!!
Powerbrake D-Line HP Rotor and Pad Kit | 80 Series Front
- Suits Toyota Land Cruiser 80 Series 1990-1997 and Lexus LX450 Front
- Powerbrake D-Line Features
  
  Rotors are cast from a proprietary high carbon cast-iron alloy.
  
  Rotors are machined to tolerances up to three times tighter than the industry norm.
  
  All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
  
  Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
  
  Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
  
  Matched high friction PB05 brake pads take the guesswork out of pad selection.
  
  Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
  
  Reduced stopping distances in both wet and dry conditions.
  
  Reduced brake fade and improved brake consistency.
  
  Improved initial brake response (bite).
  
  Improved brake modulation particularly during emergency stops.
  
  Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
  
  2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
  
  An axle set of matched PB05 high-performance brake pads – Made in Japan.
  
  Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
Rated 5.00 out of 5
(3 reviews)
Original price was: $810.00.Current price is: $689.00. Add to cart
Sale!
Performance Upgrades - Tundra 2nd Gen
FREE SHIPPING
within 48 US States
On Sale All November!!
Powerbrake D-Line HP Rotor and Pad Kit | Tundra 07-21 Front
- Suits Toyota Tundra 2007-2021 Front
- Also offered for the REAR
- Powerbrake D-Line Features
  
  Rotors are cast from a proprietary high carbon cast-iron alloy.
  
  Rotors are machined to tolerances up to three times tighter than the industry norm.
  
  All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
  
  Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
  
  Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
  
  Matched high friction PB05 brake pads take the guesswork out of pad selection.
  
  Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
  
  Reduced stopping distances in both wet and dry conditions.
  
  Reduced brake fade and improved brake consistency.
  
  Improved initial brake response (bite).
  
  Improved brake modulation particularly during emergency stops.
  
  Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
  
  2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
  
  An axle set of matched PB05 high-performance brake pads – Made in Japan.
  
  Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
Rated 5.00 out of 5
(4 reviews)
Original price was: $999.00.Current price is: $849.00. Add to cart
Sale!
JK Wrangler (2007-2018)
On Sale All November!!
Jeep Wrangler JK 4DR Long Range Auxiliary Fuel Tank (17gal) 2007-2011
- Suits Jeep Wrangler JK 4-Door Models from 2007-2011 with the 3.8L V6 Gas engine (will not fit 2-door models)
- This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
- 17 gallons plus your original 22.5 gallon tank gives you a capacity of 39.5 gallons in total!!
- Tank fills using the OEM gas door and supplied parts – fuel goes into both tanks at the same time
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- Fitting time – approximately 5 hours
- Part Number JWJKPA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
Rated 5.00 out of 5
(5 reviews)
Original price was: $2,245.00.Current price is: $1,570.00. Select options
Sale!
Jimny (2018+)
On Sale All November!!
Dobinsons Front Jimny Crossmember Drop Kit | Jimny 2018+
- Suits Suzuki Jimny 1998-2017 and 2018+
- Zinc plated for a long lasting finish
- Solid steel construction, includes all necessary longer bolts for simple installation
- See attached photo to show how it looks when installed
- Dobinsons transmission and transfer case cross member spacer kit
- Designed to correct the angle of the front driveshaft after lifting the vehicle
- Lifting the vehicle can cause driveline vibration issues, so reduce those, this kit is recommended.
Rated 5.00 out of 5
(7 reviews)
Original price was: $60.00.Current price is: $51.00. Add to cart
Sale!
Bronco (2021-2024+)
On Sale All November!!
Dobinsons Ford Bronco Rear Coils | C19-565V – Pair
- Dobinsons C19-565V Variable Rate Springs Suits Ford Bronco:
  
  2 Door – Base, Big Bend, Black Diamond, Outer Banks – 110-220Lb Load
  
  2 Door – BL, Wildtrack, First Edition – 110-220Lb Load
  
  4 Door – Base, Big Bend, Black Diamond, Outer Banks – 110-220Lb Load
  
  4 Door – BL, Wildtrack, First Edition- 0-110lb Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50099
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(13 reviews)
Original price was: $270.00.Current price is: $229.50. Select options
Sale!
Bronco (2021-2024+)
On Sale All November!!
Dobinsons Ford Bronco Front Coils | C19-564 – Pair
- Dobinsons C19-564 Suits Ford Bronco:
  
  2 Door – Base, BL 2.3L, Black Diamond, Outer Banks – 2.7L – 110-200lb Load
  
  2 Door – BL, Wildtrack, FE 2.7L – Stock Load
  
  4 Door – Base, BB, Outer Banks – 110-200lb Load
  
  4 Door – BS, BL 2.3L – Stock Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50098
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(18 reviews)
Original price was: $270.00.Current price is: $229.50. Select options
Sale!
Shocks + Struts - Tacoma 3rd Gen
On Sale All November!!
Dobinsons GS Shock Kit for Tacomas 2005-2023
- Dobinsons GS Twin Tube Strut and Shock Absorber Kit – Front and Rear
- Suits 2005-2023 Toyota Tacomas
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Painted
- Body Design: 51mm OD
- Rod: Double Chrome 18mm
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Japanese NOK Multi-Lip
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: Twin tube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- Reuse original coil spring or buy new Dobinsons springs
- Offered in Yellow or Black, choose below
Rated 5.00 out of 5
(12 reviews)
Original price was: $660.00.Current price is: $561.00. Select options
Sale!
Shocks + Struts - Lexus GX470
On Sale All November!!
Dobinsons GS Shock Kit for Lexus GX470
- Dobinsons GS Twin Tube Strut and Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Lexus GX470
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Painted
- Body Design: 51mm OD
- Rod: Double Chrome 18mm
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Japanese NOK Multi-Lip
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: Twin tube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- Reuse original coil spring or buy new Dobinsons springs
- Offered in Yellow or Black, choose below
Rated 5.00 out of 5
(13 reviews)
Original price was: $660.00.Current price is: $561.00. Select options
Sale!
Shocks + Struts - Lexus GX460
On Sale All November!!
Dobinsons GS Shock Kit for Lexus GX460
- Dobinsons GS Twin Tube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2023 Lexus GX460
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Painted
- Body Design: 51mm OD
- Rod: Double Chrome 18mm
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Japanese NOK Multi-Lip
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: Twin tube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- Reuse original coil spring or buy new Dobinsons springs
Rated 5.00 out of 5
(12 reviews)
Original price was: $660.00.Current price is: $561.00. Select options
Bump Stops - 200 Series
FREE SHIPPING
within 48 US States
Timbren Bump Stops Front & Rear | 200 Series Land Cruiser
- Suits 2008-2021 Land Cruiser 200 Series
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC2 replaces the rear OEM bump stops and ABSTOF replaces the fronts on the Land Cruiser 200 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
Rated 5.00 out of 5
(14 reviews)
$538.72 Add to cart
Brake Lines + Bump Stops - Lexus GX470
FREE SHIPPING
within 48 US States
Timbren Bump Stops Front & Rear | Lexus GX470
- Suits 2003-2009 Lexus GX470
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORSEQ replaces the rear OEM bump stops and ABSTOF replaces the fronts on the Lexus GX470. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
Rated 5.00 out of 5
(13 reviews)
$538.72 Add to cart
Sale!
Rock Sliders
On Sale All November!!
RCI Tundra Rock Sliders | Tundra 2022-2023+
- Suits Toyota Tundra 2022+ Dual Cab Short Bed and Crew Max Short Bed
- Will not fit any long bed models
- Compatible with Hybrid and Gas models
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
  
  Sliders come STANDARD with 1.75″ DOM outer rails for uncompromised strength
  
  Heavy duty 1/4″ thick gussets on all Five legs
  
  Mitered main tube ends provide a superior aesthetic appearance that matches the contours of the truck
  
  Full length, 3/16″ frame plate and Five leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 5 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for step surface provides many benefits
  
  Added safety for kids and pets getting in and out of the vehicle
  
  Added protection to rocker panels from rocks and debris thrown from tires
  
  Dimpled surface gives added grip and provides structural rigidity to the slider
- Easy install with only basic hand tools
- Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
- All hardware provided (grade 5 & 8 hardware where applicable)
- Standard with RCI’s signature low profile rear kick-out
- Made to order from your selections below
- Tundra Sliders ship by Truck Freight! Additional Charge for home delivery
- MADE IN THE USA
Rated 5.00 out of 5
(6 reviews)
Original price was: $1,199.99.Current price is: $1,020.00. Select options
Sale!
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
On Sale All November!!
RCI Tacoma Transfer Case Skid Plate
- Fits Toyota Tacoma 2005-2023
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- All models include a heavy duty 3/16″ steel cross-member- aluminum option includes a powder coated steel cross-member
- All Cross-members come powder coated black for ALL options (bare steel/aluminum and powder coat steel/aluminum)
- Direct bolt on addition to existing factory attachment points, no drilling required
- Designed around stock exhaust system
- Made in the USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $299.99.Current price is: $255.00. Select options
Sale!
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
On Sale All November!!
RCI Gas Tank Skid Plate | Tacoma 2005-2023
- Fits all Toyota Tacoma from 2005-2023
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surface that easily slides over obstacles
- Material: 3/16” Steel or 1/4” 5052 Aluminum Alloy
- Weight: 3/16” Steel- 52lbs. Aluminum- 26lbs.
- Finish: Heavy Duty Black Powder Coat or Bare Metal
- Made in the USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $299.99.Current price is: $255.00. Select options
Bumpers + Roof Racks - 5th Gen 4Runner
FREE SHIPPING
within 48 US States
Warn 100022 Semi-Hidden Winch Bumper | 2014-2024 4Runner
- Suits 2014-2024 Toyota 4Runner 5th Gen (not Limited models)
- Provides Two Recovery Points For Shackles
- Low-Profile 2 Inch Grille Guard Tube Adds Frontend Protection
- Constructed Of Heavy-Gauge Steel With A Durable Black Textured Powder Coated Finish To Protect Against Corrosion
- Built-In Port For Clutch Lever Access Or Lighting (4Runner Only)
- Easy Install – No Need To Relocate The Winch Control Pack
- Limited 1 Year Warranty
- Installation Instructions
- Compatibility: Mid-Frame Winches Up To 12000 Pound Except PowerPlant/ 9.0RC/ M8274-50
- Type: Front Bumper Mount
- Includes Winch: No
- Includes Winch Carrier: Yes
- Includes Grille Guard: Yes
- Includes Brush Guard: No
- Includes Light Mounting Bar: No
- Includes Mounting Brackets: No
- Estimated Install Time (Hours): 4
- Please note the Semi-Hidden Kit is not compatible with the factory Toyota TSS system. The upper tube may interfere with it working 100% properly
Rated 5.00 out of 5
(5 reviews)
$1,149.19 Add to cart
Winches
FREE SHIPPING
within 48 US States
Warn 103253 VR Evo 10-S Winch 10K | Synthetic Rope
- Winch; VR10-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 10000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
- Black Tactical Look Puts You At The Head Of The Off-Road Pack
- Waterproof Albright® Contactor Control For The Ultimate In Reliability
- One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
- Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
- Powerful, Efficient Series-Wound Motor
- Best-In-Class Load-Holding Cone Brake For Superior Control
- Limited 7 Year Warranty
- Winch Rating: 10000 Pound
- Recommended Use: Jeep/Truck/SUV
- Operation Type: Electric
- Mount Type: Fixed Mount
- Voltage: 12 Volt
- Free Spooling: Yes
- Line Length (FT): 90 Feet
- Line Material: Synthetic
- Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
- Brake Type: Spring Applied Disc
- Max Amp Draw: 358 Amp Draw At 1000 Pound
- Gear Reduction Ratio: 218:1
- Includes Mounting Hardware: Yes
- Thermal Shutoff: No
- Color: Black
- Fairlead Type: Hawse
- Remote Type: Wired
- Line Speed At Max Pull: 5.2 Feet Per Minute At 1000 Pound
- Electrical Control Type: Contactors
- Motor Type: Series Wound
- Drive Gear Type: Planetary
- Line Diameter (IN): 3/8 Inch
- Mounting Hole Quantity: 4
- Drum Material: Steel
- Estimated Install Time (Hours): 2
- Warn Warranty information is all listed here: https://www.warn.com/warranties
Rated 5.00 out of 5
(5 reviews)
$864.99 Add to cart
Sale!
Bumpers - Bronco 2021+
FREE SHIPPING
within 48 US States
Warn 108160 Elite Ford Bronco Rear Bumper | 2021-2023
- Suits Ford Bronco 2021-2023 (Fullsize Bronco)
- MADE IN USA
- State-Of-The-Art Flat-Black Powder-Coated Finish Stands Up To 408 Hour Salt Spray Testing And Excellent UV Protection
- Accommodates Most 37 Inch Tires Mounted On Factory Tailgate
- Warn Ford Bronco Rear Bumper Retains Factory Receiver
- Maintains Factory Eyelets To Retain Recovery Options
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: No
- Winch Compatible: No
- Tow Hooks: Not Compatible With Tow Hooks
- D-Rings: With D-Ring Mounts
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 4
Rated 5.00 out of 5
(9 reviews)
Original price was: $1,099.99.Current price is: $925.00. Read more
Sale!
Sliders Skids + Steps - FJ Cruiser Early
FREE SHIPPING
within 48 US States
On Sale All November!!
Apex 2006-2014 Toyota FJ Cruiser Rock Sliders
- Suits 2006-2014 Toyota FJ Cruiser
- All Pro Offroad APEX FJ Cruiser Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- EASY BOLT ON APPLICATION
- CLASS 10.9 HARDWARE INCLUDED
- They are built from heavy-duty .120″ wall tubing
- The shape of our FJ Cruiser Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the FJ Cruiser Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock FJ Cruiser Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
Rated 5.00 out of 5
(3 reviews)
Original price was: $949.00.Current price is: $806.65. Select options
On Backorder
270° Awnings
FREE SHIPPING
within 48 US States
Overland Vehicle Systems Nomadic 270LTE Driver Side 270 Degree Awning
- Driver Side Mount
- The Overland Vehicle Systems Nomadic 270LTE Awning is the perfect solution for anyone in need of reliable, free-standing shelter.
- Made with quality materials, this awning provides up to 75 square feet of coverage and can be used at a full 270 degrees.
- The Overland Vehicle Systems Nomadic 270LTE Awning is both easy to set up
- The Nomadic 270LTE Awning is supported by 4 integrated drop-down legs, 4 integrated 1-1/8″ tubular heavy-duty rafters supported on a Heavy-Duty Aluminum Frame.
- The Nomadic 270LTE Awning is made from 280G poly cotton rip stop material with heat sealed seams, easily folds, and secures in a 1000g PVC cover.
- This Nomadic 270LTE awning features a universal “L” mounting bracket solution that can be mounted onto a variety of roof racks, making it perfect for your off-road rig.
- The awning comes with a 4-year warranty, ensuring your satisfaction.
Rated 5.00 out of 5
(8 reviews)
$499.99 Add to cart
On Backorder
JK Wrangler (2007-2018)
FREE SHIPPING
within 48 US States
King 4WD Premium Jeep JK 2 Door Soft Top w/ Tinted Windows | 2010-2018
- Suits 2010-2018 Jeep Wrangler JK 2 Door soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
Rated 5.00 out of 5
(6 reviews)
$249.99 Add to cart
TJ Wrangler (1996-2006)
FREE SHIPPING
within 48 US States
King 4WD Premium TJ Wrangler Soft Upper Door Windows
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (and LJ Unlimited) with Factory Half Door and Soft Door Uppers
- Does not include any framework
- Includes left and right side windows
- Black Diamond Fabric with clear windows
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Also available with Tinted Windows
- We also sell a full soft top with replacement soft half door uppers as well, click for details
Rated 5.00 out of 5
(8 reviews)
$99.99 Read more
TJ Wrangler (1996-2006)
FREE SHIPPING
within 48 US States
King 4WD Premium TJ Wrangler Soft Top w/ Tinted Windows
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (not LJ Unlimited)
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
- We also sell a full soft top with replacement soft half door uppers as well, click for details
Rated 5.00 out of 5
(8 reviews)
$199.99 Read more
Sidekick/Tracker (1988-1998)
FREE SHIPPING
within 48 US States
King 4WD Premium Soft Top w/ Tinted Windows, 1989-1994 Suzuki Sidekick Geo Tracker
- Suits 1989-1994 Suzuki Sidekick and Geo Tracker 2-door soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
Rated 5.00 out of 5
(8 reviews)
$189.99 Add to cart