Your cart is currently empty!
Dobinsons Spring & Suspension
Showing 721–750 of 1123 resultsSorted by popularity
-
Full Suspension Kits - FJC LateFREE SHIPPING
within 48 US StatesDobinsons 1.5-2.5″ 3-Way Adjustable MRA FJ Cruiser Coilovers for 2010-2014
- Suits Toyota FJ Cruiser 2010-2014
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- MRA59-A700 – 560mm extended, 420mm compressed
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(7 reviews) -
Full Suspension Kits - GX460FREE SHIPPING
within 48 US StatesDobinsons 2-3.5″ Extended Travel 3-Way Adjustable MRA Coilovers for Lexus GX460
- Suits 2010-2023 Lexus GX460
- Looking for a quick and easy way to lift your GX460? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- MRA59-A574 Travel – 575mm extended, 420mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(4 reviews) -
Full Suspension Kits - XterraDobinsons 1.6″ Suspension Kit | Nissan Xterra Lift Kit 2005-2015
- Complete Dobinsons Suspension Kit for your Nissan Xterra 4×4 (2005-2015)
- Choose what front and rear lift heights and load ratings you would like
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Full 2 year limited warranty
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Upgraded shock options are also available in other kits
(13 reviews) -
Ranger 2019+ (US Spec)FREE SHIPPING
within 48 US StatesDobinsons Front UCA’s Pair | Ford Ranger USA Spec 2019-2023
- Suits Ford Ranger 2019+ with Steel Knuckles Only
- Complete kit for both left and right hand side, includes new ball joints (installed), OE style rubber frame bushings (installed), and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable OE style ball joints, fully sealed for maintenance free life
- Will not work on Aluminum Knuckles!!!
- Product Video
- Installation Instructions
- Images for illustration and detail purposes
(4 reviews) -
Ranger 2019+ (US Spec)
Dobinsons C19-534 Front Coils for Ford Ranger USA Spec – 1.75″ Heavy Load – Pair
- Suits 2019-2023 Ford Ranger USA Spec – lifts 1.75″ with 150-220LBS added weight
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- Photo shows how they would look when installed on the IMS19-50096 Struts
(6 reviews) -
Ranger 2019+ (US Spec)
Dobinsons C19-532 Front Coils for Ford Ranger USA Spec – 1.75″ – Pair
- Suits 2019-2023 Ford Ranger USA Spec – lifts 1.75″ with stock weight
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- Each pair of coils lift 1.75″ over stock height
- Photo shows how they would look when installed on the IMS19-50096 Struts
(5 reviews) -
Steering DampersFREE SHIPPING
within 48 US StatesDobinsons Monotube JL Adjustable Steering Damper | Wrangler JL Gladiator JT
- Suits 2018+ Jeep Wrangler JL and 2020+ Jeep Gladiator JT
- 56mm Extruded and CNC machined 6061-T6 hard anodized aluminum body
- Hard-anodized and clear coated for a durable finish.
- External reservoir design separates oil and high-pressure nitrogen gas
- Black-anodized, CNC machined 6061-T6 billet aluminum Components
- 5/8” hard chrome plated heat treated alloy steel Shaft
- 50mm high-flow 6061-T6 CNC machined Piston
- Natural rubber OEM style bushings
- Direct replacement for stock and after-market lifts kits
- 12 stage adjustment range
- Installation Instructions
(5 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 6″ Lift IMS Kit Builder | Land Cruiser 80 Series 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- Kit requires additional parts for this lift height, see below
- **Kit photo may show with additional options purchased**
- Coils are specifically suited to match lift height and added weight
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- IMS shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Kit includes front and rear shocks and coils, steering damper, 5 degree castor kit, Front and Rear adjustable panhard rods for left hand drive, front sway bar extensions and rear proportioning valve extension – or whatever you add to the cart. If you don’t add it, it’s not included
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
(10 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons 3″ MRA Suspension Kit for Jeep Gladiator JT
- For 2020+ Jeep Gladiator JT 2020+
- Select from different coil spring options below
- Complete MRA suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Monotube Shocks, 2 Rear MRA Monotube Shocks, and 4 Coil Springs – Select your preferences
(9 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons SK59-015/16 Greasable Shackle Kit Pair for Toyota 45/55 Series
- Suits front or rear of FJ55 Land Cruisers, and the rear of FJ45 HJ45 pre 8/1980 Models
- Comes with 1 left and 1 right side (SK59-015 x 1 and SK59-016 x 1)
- Suits leaf springs with 30mm spring eyes
- Recessed twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo for illustration purposes only
(6 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons SP59-022 Greasable Pin Kit (Pair) Land Cruiser FJ45 HJ45 Rear pre 8/1980
- Dobinsons SP59-022 Greasable Pin Kit – Toyota Land Cruiser 45 Series rear end with 30mm spring eyes.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- Photo for reference only, actual product may appear different
(8 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons 40mm Suspension Kit | Toyota Land Cruiser FJ45 HJ45 Pre-8/1980
- 40mm Lift Kit – Land Cruiser 45 series 1960 to 1979 models with 25mm eye front and 30mm eye rear leaf springs
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
(13 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons PB59-1014K Polyurethane Leaf Spring Bush Kit for FJ45 HJ45 FJ55 30mm eyes
- Suits FJ45 and HJ45 Series Land Cruisers REAR ONLY and FJ55 Land Cruisers Front and Rear with 35mm spring eyes
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- 1 Kit suits 1 pair of leaf springs
(7 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons Rear Medium Load Leaf Springs Pair for FJ45 HJ45 pre 8/1980 (30mm eyes)
- Rear Leaf Springs for the Toyota FJ45 HJ45 4×4 up to 8/1980 models and they give 40mm (1.6″) of lift with stock weight.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
- You can use the heavier version and remove the #3 leaf from both sides to make them the same as these medium load springs
(6 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons TOY-029-R Rear Heavy Load Leaf Springs Pair for FJ40 BJ40 up to 1979
- Rear Leaf Springs for the Toyota FJ40 BJ40 up to 1979 with 25mm spring eyes
- 45mm rear lift with 300LBS rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, springs only
(6 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons HJ45-7L-F Front Leaf Springs Pair for FJ/BJ40 FJ/BJ45 up to 1979
- Front Leaf Springs for the Toyota FJ/BJ40 and FJ/BJ45 up to 1979 with 25mm eyes
- 45mm front lift with 400LBS constant weight on an FJ40/BJ40
- 45mm front lift with stock front end weight on an FJ45/BJ45
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
(5 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square HeadlightsFREE SHIPPING
within 48 US StatesDobinsons 2.5″ IMS Lift Kit Toyota Land Cruiser 1/90-5/93 LJ70/72/73/77 | 1994+ RJ70/73 KZJ 70/71/73/78
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement shocks for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Shocks are Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and IMS shocks. Add other parts below
(9 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons JL JT Adjustable Front Lower Arms Pair | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with highly flexible rubber bushings installed
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- More details and installation instructions are down below
(4 reviews) -
JL Wrangler (2018-2025+)FREE SHIPPING
within 48 US StatesDobinsons IMS29-60737 Rear 2.6″ IMS Shocks Pair | Jeep JL Wrangler
- Fits Jeep Wrangler JL 2018+ 2-door and 4-door
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 732mm extended, 460mm compressed
(14 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS29-60736 Front 2.6″ IMS Shocks Pair | Jeep Gladiator & JL Wrangler
- Fits Jeep Gladiator JT 2020+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 682mm extended, 425mm compressed
(13 reviews) -
Dobinsons
Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu + Honda – 1145mm (45.08″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1550 are 1145mm (45.08″), 30mm bar thickness
- Also may fit some Honda Passport models from 2/1999 to 2002, but be sure to measure your stock length first
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(4 reviews) -
Pathfinder R51 (2005-2012)FREE SHIPPING
within 48 US StatesDobinsons GS45-643 Rear Shocks Pair | Nissan Pathfinder R51 2005-2012
- Suits Nissan Pathfinder R51 from 2005 to 2012 models
- Suitable for stock height up to 2.0″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
(8 reviews) -
Explorer U502 AWD 2012+
Dobinsons C19-439 2″ Lift Rear Coils for Ford Explorer U502 2012-21 AWD 3.5L 3.7L – Pair
- 2″ rear lift coils for a Ford Explorer AWD 3.5L and 3.7L from 2012-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(4 reviews) -
Explorer U502 AWD 2012+
Dobinsons C19-438 2″ Lift Front coils for Ford Explorer U502 2012-21 AWD 3.5L 3.7L – Pair
- 2″ front lift coils for a Ford Explorer AWD 3.5L and 3.7L from 2012-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(5 reviews) -
Coil Springs
Dobinsons C45-422 Front 30mm lift Coil Springs for Nissan Pathfinder 4×4 R52 – Pair
- C45-422 Front coils will lift 30mm over original height with the added weight of 110-180LBS of constant weight, such as a bumper or winch
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
(5 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons GS29-726 Pair of Front Struts for Jeep Grand Cherokee WK and Commander
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS29-726 Specifications: 517mm extended, 358mm compressed
(8 reviews) -
55 Series (1970-80)
Dobinsons 1.75″ Suspension Kit for Toyota Land Cruiser FJ55 1970-1980
- Full 1.75″ suspension for Toyota Land Cruiser Wagon FJ55 models, from 1970 to 1980
- All parts are also available separately, HERE
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Hand made leaf springs, built in Queensland, Australia
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add the home delivery fee below. We will be in touch with that delivery address
(3 reviews) -
Rear Bumpers
Dobinsons Lexus GX470 Rear Bumper with Tire and Jerry Can Carrier
- Suits Lexus GX470 from 2003 to 2009
- Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes Jerry can carrier and single spare tire carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Does not include any hitch or towing ability. Designed to work around standard type tow hitch below rear cross member
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(14 reviews) -
Coil Springs
Dobinsons C45-420 Front 30mm lift Coil Springs for Nissan Pathfinder 4×4 R52 – Pair
- C45-420 Front coils will lift 30mm over original height with no added front weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Photo is not of actual coil springs for this vehicle
- Sold in Pairs
(16 reviews) -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons Front Lifted Coil Options for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Jeep Cherokee AD1 is Sport and Latitude models generally
- Jeep Cherokee AD2 is Trailhawk models generally
- Choose the appropriate coils to suit your model and added weight
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold in pairs
(17 reviews)
