Your cart is currently empty!
Dobinsons Spring & Suspension
Showing 751–780 of 1057 resultsSorted by popularity
-
LightingFREE SHIPPING
within 48 US StatesDobinsons 8.25″ Zenith 155 Watt LED Driving Light Pair with 12700 Raw Lumens
- 155w (9 – 32v DC), 210mm (8.25″) Diameter to fit most front aftermarket bumper designs
- 4 x 20 Watt 6000K Long Distance Center LED’s
- 15 x 5 Watt 6000K Spread Center LED’s
- 50,000+ Hours Life Span
- Highly resistant to vibration and corrosion
- IP68 Water and Dust Proof Rating
- 12,700 Raw Lumens Per Light, 25,400 Per Pair!!!
- Poly carbonate Smash Resistant Lens
- Heavy Duty Braced Steel Mount
- Wiring Harness sold separately (if needed)
(18 reviews) -
Fridge/FreezersFREE SHIPPING
within 48 US StatesDobinsons 4×4 12V Portable 50L Fridge Freezer w/FREE cover
- Utilizes Highest Quality Danfoss BD-35F Compressor – Maximum Cooling Efficiency with Minimal Power Drain
- 12/24V DC, comes with AC 240V external adapter, Includes FREE Cover
- Suitable for car, truck, SUV, RV, Boat, Bus, Ambulance, Travel Trailers
- Integrated 3 stage low voltage cut-off battery protection with auto restart
- High quality insulation to minimize exterior sizing but maximize internal capacity
(5 reviews) -
Sale!Fridge/FreezersFREE SHIPPING
within 48 US StatesDobinsons 4×4 12V Portable 40L Fridge Freezer
- Utilizes Highest Quality Danfoss BD-35F Compressor – Maximum Cooling Efficiency with Minimal Power Drain
- 12/24V DC, comes with AC 240V external adapter
- Suitable for car, truck, SUV, RV, Boat, Bus, Ambulance, Travel Trailers
- Integrated 3 stage low voltage cut-off battery protection with auto restart
- High quality insulation to minimize exterior sizing but maximize internal capacity
(5 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons 4×4 Snorkel Kit | Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985-07 3.4L/4.0L
- Dobinsons SN59-3374 Suits 4.0L Diesel, 4.0L Petrol, 3.4L Diesel
- 1985 to 2007 (Narrow Front) 70 Series Toyota Land Cruisers, including the 70, 71, 73, 74, 75, 78, and 79 Series variant
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
(8 reviews) -
Recovery
Dobinsons 4×4 Off Road Rapid Tire Deflator with Gauge and Pouch
- 0-60 PSI Gauge Included at 1PSI Increments, giving easy and accurate readings
- Quick Release Coupling to Allow Pressure Checking at any time during Deflation
- Corrosion Resistant Brass Fittings for Long Life
- Includes Carry Case
- Combine with Dobinsons Air Compressor and Deluxe Tire Repair Kit for a Complete Tire Maintenance Package
(7 reviews) -
Awnings
Dobinsons 4×4 Roll Out Awning 4.6FT x 6.5FT Small Size with LED Light
- Measures 1.4M (4.6FT) against the vehicle, extending out 2.0M (6.5FT) away from the vehicle
- Heavy Duty Waterproof, Breathable Rip-stop 420D PU Oxford Polyester
- Could mount to left or right hand side or facing rear, due to small size
- Complete with Fitting Instructions & Tools, Poles, Ropes & Pegs
- Quick, Simple Setup & Pack Up. Manually opens and closes (not automatic)
- Included LED Strip Light
(10 reviews) -
Recovery
Dobinsons 4×4 4.75T Rated Bow Shackles / D-Rings with 3/4″ Pin – Pair
- Rated 4.75 Ton Bow Shackles
- 3/4″ Pin
- Sold as a Pair
- Painted – red pin and black bow
(8 reviews) -
Dobinsons
Dobinsons Coil Spring Silencer
- For +-17mm Wire Diameter Coil Springs
- Measure the thickness of the wire on your coil springs before ordering
- Offered in 2 different sizes for different inner diameter (ID) coil springs
- Suits 102-124mm (4.0″ – 4.88″) ID Coil Springs
- Suits 130mm -146mm (5.1″ – 5.75″) ID Coil Springs
- To be installed in the softer section of a variable rate coil spring. (The part of the coil spring that collapses first, up top)
- Made from High-Durometer Rubber
- Has adhesive inside to stay in place
- Sold INDIVIDUALLY, order 2 for 2 coil springs
(0 reviews)$10.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-485VT Dual Rate 4.0″ Rear Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 4.0″ with a heavy load rear end of 300-400LBS of added weight (bumper, drawers, tent, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Recommended to run with Dobinsons 6″ lift shocks for maximum travel
(0 reviews)$485.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-484VT Dual Rate 4.5″ Front Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 4.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Recommended to run with Dobinsons 6″ lift shocks for maximum travel
(0 reviews)$485.00 Select options This product has multiple variants. The options may be chosen on the product page -
Ineos GrenadierFREE SHIPPING
within 48 US StatesDobinsons MRA 3-Way Adjustable 1.75″ Ineos Grenadier Suspension Kit
- Full Suspension kit that lifts 1.75″ over stock height, Suits Ineos Grenadier 2023-2025+
- Choose from standard load or heavy load coils front and rear
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Suspension has a Full 2 year limited warranty
- Photos for illustration purposes
- If you’re building out a sick overland rig, don’t forget to think about adding some Fuel Capacity!!
(0 reviews) -
Ineos GrenadierFREE SHIPPING
within 48 US StatesDobinsons IMS Monotube 1.75″ Ineos Grenadier Suspension Kit
- Full Suspension kit that lifts 1.75″ over stock height, Suits Ineos Grenadier 2023-2025+
- Choose from standard load or heavy load coils front and rear
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Suspension has a Full 2 year limited warranty
- Photos for illustration purposes
- If you’re building out a sick overland rig, don’t forget to think about adding some Fuel Capacity!!
(0 reviews) -
Ineos Grenadier
Dobinsons Steering Damper with Bracket for Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+
- Relocates the steering damper to up above the drag link for proper clearance
- Use in conjunction with SD59-824 steering damper
- Bundle includes the steering damper and necessary bracket for fitment
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place with included bracket
- 650mm extended, 420mm compressed
(0 reviews) -
Ineos Grenadier
Dobinsons WA51-625K Brake Line Extension Kit – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+
- Includes necessary parts for front and rear in one kit
- Required to run with Dobinsons IMS or MRA front shocks on the Grenadier
(0 reviews) -
Ineos Grenadier
Dobinsons SE51-619 Front Sway Bar Extension – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+
- Set of 2 sway bar extensions for the front
- Required to run with Dobinsons IMS or MRA front shocks on the Grenadier
(0 reviews) -
Ineos Grenadier
Dobinsons WA51-626K Front Steering Damper Relocation Bracket – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+
- Relocates the steering damper to up above the drag link for proper clearance
- Use in conjunction with SD59-824 steering damper
(0 reviews) -
Ineos Grenadier
Dobinsons C51-153V Rear Coil Springs Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Rear, lifts 45mm (1.75″) with a stock weight rear end
- Variable rate springs for great ride quality when fully loaded or not
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- SOLD IN PAIRS
(0 reviews) -
Ineos Grenadier
Dobinsons C51-155V Rear HD Coil Springs Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Rear, lifts 45mm (1.75″) with 300-650LBS added rear end weight, like from a bumper, 2nd fuel tank, roof top tent, etc
- Variable rate springs for great ride quality when fully loaded or not
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- SOLD IN PAIRS
(0 reviews) -
Ineos Grenadier
Dobinsons C51-154 Front HD Coil Springs Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Front, lifts 45mm (1.75″) with 110-220LBS added front end weight, like from a bumper, winch, 2nd battery, etc
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- SOLD IN PAIRS
(0 reviews) -
Ineos Grenadier
Dobinsons C51-152 Front Coil Springs Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Front, lifts 45mm (1.75″) with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- SOLD IN PAIRS
(0 reviews) -
Ineos GrenadierFREE SHIPPING
within 48 US StatesDobinsons MRA51-A270 2.6″ 3-Way Adjustable Shocks Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Front and Rear (this SUV uses the same shocks front and rear)
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photo for illustration purposes
- Note: These shocks should be run with Dobinsons front sway bar extensions and front and rear brake line extension kits to prevent any binding or damage
(0 reviews) -
Ineos GrenadierFREE SHIPPING
within 48 US StatesDobinsons IMS51-60270 2.6″ Monotube IFP Shocks Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Front and Rear (this SUV uses the same shocks front and rear)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Photo for illustration purposes
- Note: These shocks should be run with Dobinsons front sway bar extensions and front and rear brake line extension kits to prevent any binding or damage
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons 2-3″ MRA 3-Way Adjustable MRA Lexus GX550 Lift Kit
- Suits 2024-2025+ Lexus GX550
- Choose from 2 to 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Front MRA struts assembly instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons 2-3″ IMS Lexus GX550 Lift Kit
- Suits 2024-2025+ Lexus GX550
- Choose from 2 to 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat height should be set at 237mm (9.3″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
(0 reviews) -
Dobinsons
Dobinsons Single Caster Wedge 60MM Wide – 3 Degrees
- 3 Degree Caster shim can be used to correct front caster / pinion angle or rear pinion angle on a 60mm wide leaf spring
- Sold individually
- Suits the following Dobinsons leaf spring part numbers:
- 106-4+3-R
- 106-5+3-R
- B2600-4X4-R
- DAI-009-F
- DAI-011-R
- DAI-015-R
- DAI-020-F
- DAI-021-R
- F77-5+2-R
- F77-5L-F
- HIL-001-F
- HIL-002-F
- HIL-003-F
- HIL-006-R
- HIL-010-F
- HIL-034-R
- HIL-035-R
- HIL-4+2-R
- HIL-5+2-R
- L19-131-R
- L19-132-R
- L19-133-R
- L21-140-R
- L21-141-R
- L21-142-R
- L39-030-R
- L39-031-R
- L39-032-R
- L45-002-R
- L45-003-R
- L45-004-R
- L45-151-R
- L45-152-R
- L45-153-R
- L45-154-R
- L59-040-R
- L59-041-R
- L59-042-R
- L59-110-R
- L59-111-R
- L59-112-R
- L59-120-R
- MAZ-003-R
- MK-6L-F
- MK-7L-F
- MQ-6L-F
- MQ-7L-F
- MQ-UTE-R
- MQ-WAG-R
- NAV-005-R
- NAV-4WD-R
- NIS-260-F
- RODE-008-R
- RODE-011-R
- RODE-012-R
- RODE-013-R
- TOY-470-R
- UAZ-004-R
- UAZ-006-R
(7 reviews) -
Dobinsons
Dobinsons 80 Series Coil Spacers Front or Rear 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- All coil spring spacers are sold individually
- Order 2 spacers to lift the left and right side the same amount
- Made of long lasting high quality polyurethane
- The lift height is exactly the amount you will lift from the height you have now
- Perfect fit between OE isolator and coil seat
- Coil spacers cannot be stacked – use only one spacer per coil
(9 reviews) -
Full Suspension Kits - Jeep TJFREE SHIPPING
within 48 US StatesDobinsons 3″ Basic Lift Kit for Jeep Wrangler TJ 1997-2006
- Suits 1997-2006 Jeep Wrangler TJ and LJ
- Lifts 3″ front and rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
- Shocks are yellow, coil springs are teal
- Photos for illustration purposes
(8 reviews) -
Full Suspension Kits - Tacoma 4th GenFREE SHIPPING
within 48 US StatesETA is Spring 2025Dobinsons 2-3″ MRA 3-Way Adjustable Lift Kit | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma 4×4 Models with coil springs in the back
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose from 2 or 3″ of front lift, and 2″-3″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit leaf spring equipped models
- Coil seat for MRA59-A490 should be set at 251mm (9.9″) from the strut bushing eye
- Front MRA struts assembly instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
(0 reviews) -
Full Suspension Kits - Tacoma 4th GenFREE SHIPPING
within 48 US StatesETA is Spring 2025Dobinsons 2-3″ IMS Lift Kit | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma 4×4 Models with coil springs in the back
- Choose from 2 or 3″ of front lift, and 2″-3″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit leaf spring equipped models
- Coil seat for IMS59-60490 should be set at 251mm (9.9″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
- Note: A diff drop kit should be run if you have a base model Tacoma or if you’re running 3″ of lift
(0 reviews) -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons 2-3″ MRA 3-Way Adjustable Lift Kit | Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 4×4 Models
- These specs are based on the 2.4L and 2.7L 4Cyl Engine models
- Choose from 2″, 2.5″ or 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Front MRA struts assembly instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
(0 reviews)
