Your cart is currently empty!
Dobinsons Spring & Suspension
Showing 781–810 of 1057 resultsSorted by popularity
-
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons 2-3″ IMS Lift Kit | Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 4×4 Models
- These specs are based on the 2.4L and 2.7L 4Cyl Engine models
- Choose from 2, 2.5″ or 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat height should be set at 237mm (9.3″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
(0 reviews) -
250 Series Land Cruiser (2024-2025+)ETA is Spring 2025
Dobinsons C59-885V Rear Coil Springs Pair
- Lifts the Rear of a 2024+ Toyota Land Cruiser 250 series 40mm (1.6″) with stock weight up to 110LBS of added weight and Lexus GX550 2.0″ with stock weight up to 110LBS of added weight
- These variable rate coils handle loaded weight better than a liner coil, as they get stronger when they get compressed further
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024-2025+)ETA is Spring 2025
Dobinsons C59-816 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with 150-220 constant front end weight (bumper, winch, etc) with the 2.4L or 2.7L gas engine.
- Lifts Lexus GX550 2.0″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024-2025+)ETA is Spring 2025
Dobinsons Strut Mounts Pair for Toyota Land Cruiser 250 + GX550
- Made specifically for the 4×4 Toyota Land Cruiser 250 Series and Lexus GX550 2024-2025+
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(0 reviews) -
DobinsonsETA is Spring 2025
Dobinsons C59-869V Rear Coil Springs Pair
- Dobinsons C59-869V Rear Coils for the 2024+ Toyota Tacoma – 2.0″ lift with stock weight, 1.25″ lift with 100lbs constant added weight.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are recommended
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
DobinsonsETA is Spring 2025
Dobinsons Tacoma Strut Mounts Pair for Toyota Tacoma 2024+
- Made specifically for the 4×4 Toyota Tacoma 2024-2025+
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesETA is Spring 2025Dobinsons MRA59-A490 3-Way Adjustable Front Struts Pair | Tacoma 2024+
- Suits 2024+ Toyota Tacoma
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A490 should be set at 251mm (9.9″) from the strut bushing eye
- Photos for illustration purposes only
- New Dobinsons Strut Mounts should be run with these for strength and longevity
(0 reviews) -
Full Suspension Kits - Prado 90 95FREE SHIPPING
within 48 US StatesDobinsons Land Cruiser Prado 90 95 MRA Lift Kit
- Suits 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Common installation instructions
- Note: This Prado 90 platform shares the same suspension design as the 3rd Gen Toyota 4Runner, so many descriptions will list the 3rd Gen 4Runner as that’s what these parts are most commonly sold for. However the weight of the Prado 90 is different, so the coil specs have been adjusted to suit the Prado 90.
(0 reviews) -
Prado 90 + 95 - RZN VZN KZN KDJ (1996-2002)FREE SHIPPING
within 48 US StatesDobinsons Land Cruiser Prado 90 95 Snorkel Kit for 1996-2002
- Suits 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models VZJ90, VZJ95 with the 3.4L V6 gasoline engine
- Mounts to the right hand side
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(0 reviews) -
4Runner 3rd Gen (1996-2002)
Dobinsons C59-303R Rear Lifted Coils | 3rd Gen 4Runner & Prado 90 95 – Pair
- Suits 1996-2002 Toyota 4Runner 3rd Gen and 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Gives 2″ of lift with 600-800LBS of rear constant weight (rear bumper, drawers, roof rack, tent, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – RED
- 395mm free height, 18mm wire, 388LBF/in spring rate
- Sold in Pairs
(0 reviews) -
Prado 90 + 95 - RZN VZN KZN KDJ (1996-2002)FREE SHIPPING
within 48 US StatesDobinsons Rear Bumper with Tire and Jerry Can Carrier | Prado 90 & 95
- Made for 1996-2002 Toyota Land Cruiser Prado 95 and 95 Series RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Comes standard as Black Powder Coat
- Full bolt on installation to replace your stock rear bumper
- Moves the spare tire off the back door and onto the bumper
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Choose from a single or dual jerry can carrier below
- Watch the video below for how to install it
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(10 reviews) -
Silverado 1500 (2019-2024)FREE SHIPPING
within 48 US StatesDobinsons 2″ IMS Quick Ride Suspension Kit | Silverado + Sierra 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Does not suit Trailboss or AT4 models
- Affordable 2.0″ Lift Suspension System without requiring new rear leaf packs, with 2.6″ Body Shocks!!
- Complete Quick Ride suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to provide comfort and lift
- Choose your desired suspension parts to build the kit best suited to your weight
- Fully rebuildable and re-valvable IMS struts and shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Struts feature clip adjustment levels for fine tuning of lift height
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 231mm (9.07″)
- Photos for illustration purposes
(0 reviews) -
Silverado 1500 (2019-2024)
Dobinsons C09-074 Front Coil Springs Pair | Silverado + Sierra 1500 2019+
- Suits 2019-2024 Chevy Silverado 1500 and GMC Sierra 1500 4×4
- Gives 2.0″ of lift on a base model with 160-330LBS of constant front weight (bumper, winch, skid plates), and 1.0″ of lift over Trailboss and AT4 models (which came lifted already) with 160-330LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Matching front Struts
(0 reviews)$365.00 Select options This product has multiple variants. The options may be chosen on the product page -
Silverado 1500 (2019-2024)
Dobinsons C09-072 Front Coil Springs Pair | Silverado + Sierra 1500 2019+
- Suits 2019-2024 Chevy Silverado 1500 and GMC Sierra 1500 4×4
- Gives 2.0″ of lift on a base model with stock weight up to 120LBS, and 1.0″ of lift over Trailboss and AT4 models (which came lifted already)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$365.00 Select options This product has multiple variants. The options may be chosen on the product page -
Silverado 1500 (2019-2024)
Dobinsons 2″ Rear Lift Quick Ride Kit | Chevy Silverado GMC Sierra 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 from 2019-2024, Does Not Suit Trailboss or AT4 Models
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended – IMS09-60179
- Only to be used with OE height leaf springs
- Installation Instructions
(0 reviews) -
Silverado 1500 (2019-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS09-60179 2.6″ IFP Rear Shocks Pair | Chevy Silverado 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Recommended to run with Dobinsons coils
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 635mm extended, 410mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(0 reviews) -
Silverado 1500 (2019-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS09-60178 2.6″ IFP Front Struts Pair | Chevy Silverado 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- Recommended to run with Dobinsons coils
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 231mm (9.07″)
- Photos for illustration purposes
(0 reviews) -
4Runner 1st Gen Leaf/Leaf (1984-1985)
Dobinsons Full 2.0″ Suspension Kit for Toyota 4Runner 1984-1985
- Suits 1984-1985 Toyota 4Runner 4×4 models with straight axle and leaf springs front and rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- When installing, compare the camber of the new springs with the old, as one side is taller than the other. Match them up to prevent vehicle lean
- Photos for illustration purposes
(10 reviews) -
Replacement Bushings
Dobinsons Lower Shock Bushing – For -941
- Dobinsons replacement lower shock bushing
- Suits Dobinsons shock part number IMS59-50941 and MRA59-A941
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 shock
- High quality natural rubber bushing
- Photo is of actual bushing
- These do not suit GS59-940, IMS59-50940 or MRA59-A940, those use a different size bushing
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | Tundra Tacoma
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Tundra 2022-2025+ and Toyota Tacoma 2024-2025+ with coil spring rear end
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-027FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
(0 reviews) -
LX600 (2022+)FREE SHIPPING
within 48 US StatesDobinsons Lexus LX600 IMS Lift Kit (0-3″ Lift)
- Suits Lexus LX600 from 2022 onwards
- Upgrade your suspension from stock height up to 3″ of lift with all new Dobinsons parts
- Shocks Do Not Suit Sahara ZX And GR Sport Models With Factory Electronic Shock Absorbers
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Australian Center-of-Hub to Fender original measurements are as follows: (compare to your vehicle for correct lift height estimate)
- Front: 20.25″
- Rear: 22.5″
(0 reviews) -
LX600 (2022+)FREE SHIPPING
within 48 US StatesDobinsons Lexus LX600 MRR Lift Kit (0-3″ Lift)
- Suits Lexus LX600 from 2022 onwards
- Upgrade your suspension from stock height up to 3″ of lift with all new Dobinsons parts
- Shocks Do Not Suit Sahara ZX And GR Sport Models With Factory Electronic Shock Absorbers
- Complete MRR suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- MRR = Monotube Remote Reservoir
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front MRR Struts, 2 Rear MRR Shocks, and 4 Coil Springs
- Australian Center-of-Hub to Fender original measurements are as follows: (compare to your vehicle for correct lift height estimate)
- Front: 20.25″
- Rear: 22.5″
(0 reviews) -
300 Series Land Cruiser (2021+)FREE SHIPPING
within 48 US StatesDobinsons 300 Series Land Cruiser MRR Lift Kit (0-3″ Lift)
- Suits Toyota Land Cruiser 300 Series from 2022 onwards (not sold in the USA)
- Upgrade your suspension from stock height up to 3″ of lift with all new Dobinsons parts
- Shocks Do Not Suit Sahara ZX And GR Sport Models With Factory Electronic Shock Absorbers
- Complete MRR suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- MRR = Monotube Remote Reservoir
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front MRR Struts, 2 Rear MRR Shocks, and 4 Coil Springs
- Australian Center-of-Hub to Fender original measurements are as follows: (compare to your vehicle for correct lift height estimate)
- Front: 20.25″
- Rear: 22.5″
(2 reviews) -
Dobinsons
Dobinsons C59-846 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 75mm – 3″ / 160-220LB Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 460mm free height, 19mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-844 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 75mm – 3″ / Stock Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 460mm free height, 18mm wire diameter, 485 LBF/in spring rate
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-824 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / 160-220lb Constant Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 19mm wire diameter, 531 LBF/in spring rate
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
300 Series Land Cruiser (2021+)FREE SHIPPING
within 48 US StatesDobinsons 300 Series Land Cruiser IMS Lift Kit (0-3″ Lift)
- Suits Toyota Land Cruiser 300 Series from 2022 onwards (not sold in the USA)
- Upgrade your suspension from stock height up to 3″ of lift with all new Dobinsons parts
- Shocks Do Not Suit Sahara ZX And GR Sport Models With Factory Electronic Shock Absorbers
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Australian Center-of-Hub to Fender original measurements are as follows: (compare to your vehicle for correct lift height estimate)
- Front: 20.25″
- Rear: 22.5″
(3 reviews) -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A660 3-Way Adjustable Front Struts Pair
- Suits 2024+ Toyota Land Cruiser 250 Series and Lexus GX550
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Photos for illustration purposes only
(0 reviews) -
Dobinsons
Dobinsons C59-818 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Stock Height / 110-220lb Constant Front End Load, and 2024+ Toyota Land Cruiser 250 Series – 3.0″ lift with stock weight, or 2.5″ lift with 110-220LBS constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 420mm free height, 18mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-822 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / 110-150lb Constant Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 19mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page
