Your cart is currently empty!
Shop
Showing 781–810 of 2180 resultsSorted by popularity
-
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Twin Tube Rear Shocks Pair | Toyota Tundra 2022+
- Suits the rear of a 2022-2025+ Toyota Tundra with 2-2.5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Sold in Pairs
(8 reviews) -
Full Suspension Kits - 200 SeriesFREE SHIPPING
within 48 US StatesDobinsons 1-2.5″ Pre-Assembled IMS Coilovers for Toyota Land Cruiser 200 Series 2008-2021
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 Models with 5.7L V8 Gas Engine
- Looking for a quick and easy way to lift your 200 Series? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 606mm extended, 438mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(8 reviews) -
70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 - 87-96
Dobinsons Full Length Roof Rack for Land Cruiser 76 and 78 Series including LJ78 and KZJ78
- Suits Toyota Land Cruiser 76 and 78 Series including LJ78 and KZJ78 with Gutter Rails on the roof line
- Will not suit high-roof models or PRP fiberglass tops
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes gutter mount fitting kit to secure the rack to your factory gutter rails
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
(8 reviews) -
Roof Racks
Dobinsons Full Length Roof Rack for Land Cruiser 60 80 90 Series
- Suits 1980-1997 Toyota Land Cruiser 60 and 80 Series and Lexus LX450 and Toyota Land Cruiser Prado 95 (LWB) Models RZJ95, VZJ95, KZJ95, KDJ95
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes gutter mount fitting kit to secure the rack to your factory gutter rails
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
(8 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Toyota Tundra IMS 2.25″-3.0″ Quick Ride Kit or AAL for 2007-2021 4×4 V8
- Suits 2007-2021 Toyota Tundra 4×4 V8 Dual Cabs
- Complete Quick Ride or AAL suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- In the back, you can either lift your truck with the Dobinsons Quick Ride (block and U-bolt) Kit or the Wheeler’s Add-a-leaf Kit
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Affordable suspension system without requiring new rear leaf packs
- Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
Dobinsons
Dobinsons Rear 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the rear
(2 reviews) -
Gladiator JT (2020-2025+)
Dobinsons C29-247VB Rear 3.0″ Lift Coils for Jeep Gladiator – Extra Heavy Load – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck
- Lifts 3.0″ with 440-660LBS rear end constant weight (bumper, camper, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold as a Pair
(8 reviews) -
Ram 1500 2019+FREE SHIPPING
within 48 US StatesDobinsons IMS 2.5″ Lift Kit | Dodge Ram 1500 4×4 2019+
- 2.5″ Front and 2.0″ Rear Lift Kit for Dodge Ram 1500 4×4 Models from 2019+
- Slightly less rear lift to help level out the truck
- Fully rebuildable and re-valvable monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
(7 reviews) -
Ram 1500 2019+
Dobinsons C16-048 Front 2.5″ Coils with 110-220LB Load | Dodge Ram 1500 4×4 2019-2022 – Pair
- Dobinsons C16-048 Front 2.5″ Lift Coils with 110-220LB Load | Dodge Ram 1500 4×4 2019-2022
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(9 reviews) -
Ram 1500 2019+FREE SHIPPING
within 48 US StatesDobinsons IMS 2.6″ Rear Shocks Pair | Dodge Ram 1500 2019-2022
- Pair of IMS rear shocks for Dodge Ram 1500 2019+ Models
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Frontier D41 (2022-2025+)
Dobinsons L45-003-R Leaf Springs Pair | Frontier D40 and D41
- 3″ Lift with stock weight on a 2022+ Nissan Frontier D41 Truck, or 2″ with 550LBS Constant Rear Load, 2.0″ Lift on a 2005-2021 D40 Frontier with 550LBS Constant Rear Load
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- To make these springs lighter in light height and payload, remove the #3 leaf (2 down from the top), making them the same as the L45-002-R leaf pack
- These are leaf springs ONLY and don’t come with bushings or any other parts
- Photo for illustration purposes only
(3 reviews) -
Frontier D41 (2022-2025+)
Dobinsons L45-002-R Leaf Springs Pair | Frontier D40 and D41 Stock Weight
- 2″ Lift with stock weight on a 2005-2021 Frontier D40 and 2022+ Nissan Frontier D41 Truck
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Photo for illustration purposes only
- These are leaf springs ONLY and don’t come with bushings or any other parts
(4 reviews) -
Sale!Camping EquipmentFREE SHIPPING
within 48 US StatesOVS Komodo Camp Kitchen – Dual Grill + Skillet + Folding Shelves + Rocket Tower – Stainless Steel
- The OVS Komodo Camp Kitchen is a Lightweight, Compact and Portable Camp Kitchen
- Dual Grills/Burners
- Large Cooking Skillet
- Rocket Tower (Use Wood or Briquettes to cook your food!!)
- 2 Folding Shelves
- Expandable Legs
- Storage for Cooking Utensils
- Handles
- 4 Pull Latches
- Made from Durable Aluminum and Stainless Steel
- Weight – 51 LBS
- Dimension Closed: 23.5 x 14.5 x 13″
- Dimension Open: 86 x 39.5 x 24″
- Leg Length: 10″
- Skillet Dimension: 18 x 10.5″
- Grill Station Dimension: 21 x 10.5″
- Rocket Tower Dimension: 4 x 4 x 13″
- Top Storage Dimension: 20.5 x 10.5″
(6 reviews) -
Camping EquipmentFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Cargo Box Storage Drawer w/Fridge Slide & Working Station
- Marine grade carpet that will not stain or mildew
- 4 Tie downs points that will allow you to secure your load or can be used to stack an additional box
- Two Stage dual powder coat with a 5 Year finish warranty
- Stainless steel mil spec bearings that will last you a lifetime
- Removal drawer with quick release
- Top completely slides forward to access hard to reach areas
- Top can be used as a Fridge Slide
- Feature HDPE (high-density polyethylene plastic) workstation that can act as a cutting board
- Over-sized lockable paddle lock that fits your hand nicely
- Marine grade stainless steel hardware
- Download Instructions
- Thickness Outside Case – 0.075 Inches
- External Dimensions – 25 1/4 x 16 7/16 x 13 1/4 Inches (without Tie Down Points Attached)
- Weight – 61 lbs
- Internal Drawer Dimensions – 22 1/4 x 14 x 8 7/16 Inches
- Cutting Board – 18 7/8 x 12 Inches
- Top Slide Dimensions – 25 1/4 x 16 7/16 Inches
- Storage Drawer Weight Capacity – 132.28 lbs
- Top Slide Weight Capacity – 132.28 lbs
- Cutting Board Weight Capacity – 33 lbs
(6 reviews) -
Sale!AwningsFREE SHIPPING
within 48 US StatesOVS Nomadic 270° Awning – Dark Gray Cover With Black Transit Cover & Brackets – Driver Side
Features:
- Driver Side Application
- 129 Square Feet of Freestanding Covered Shelter
- 600D Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover
- 10 Lb Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
What’s included:
- 270 Degree Awning With 6 Built-In Aluminum Rafters
- 3 Pivoting and Telescoping Aluminum Poles + 3 Telescoping Aluminum Poles
- 6 Sets of Shock Cord
- 6 Heavy Duty Stakes
- Travel Cover
- 3 Heavy Duty Mounting Brackets and Hardware
- Nylon Reinforced Tie Down Kit
(8 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOVS Soft Shackle 7/16″ 41,000 lb. With Collar – 22″ With Storage Bag
- Dyneema Synthetic Fiber that is lighter and stronger than traditional shackles
- Over Sized Heavy Duty Collar provides a quick and extremely secure retention
- Super lightweight material wont overload recovery bag
- Our standard soft shackles feature a protective sleeve that can be used for any
- All OVs shackles come with a quick deploying storage bag with a pull cinch top
- OVS soft shackles are safer to use because it doesn’t store kinetic energy when under-load
- Soft shackles are rattle free and won’t damage bumpers and other recovery rigging
- All OVS soft shackles come with a Limited Lifetime Warranty
- Quick and easy to use and requires no tools
- Can be used as a snatch block when used with OVS recovery ring
(8 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOVS Receiver Mount Recovery Shackle 3/4″ 4.75 Ton Rated
- Cross drilled so it can be used vertically or horizontally
- Includes rated 3/4″ shackle
- Includes pin and clip to slide mount into a 2″ receiver hitch
- All black
(3 reviews) -
Sale!RecoveryFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Digital Tire Deflator with Valve Kit & Storage Bag
- Oversized Digital Gauge
- Heavy Duty Rubber Protective Cover
- Illuminated Display
- Anti Rust Brass and Stainless Steel Components
- Reinforced Nylon Wrapped Air line
- 3 Inch Circle Dial
- 17 Inch Hose
- Removes The Valve Core For Fastest Deflation
- Instantly Read The PSI
(3 reviews) -
Camping EquipmentFREE SHIPPING
within 48 US StatesOVS LED Light Adjustable Dimmer With Adaptor Kit 47″ for Awning & Tent
- 47″ with energy efficient LED Technology
- Fully adjustable dimmer switch to control brightness
- Built in threads for added security and protection from the elements
- Tongue and groove slide-in design
- Compatible with our Awning & Tent organizer
- Powered through your vehicles auxiliary power outlet
- Specifications: DC12V/1A, 860lm
(3 reviews) -
Sale!Air CompressorsFREE SHIPPING
within 48 US StatesEGOI Portable Air Compressor System 5.6 CFM With Storage Bag + Hose + Attachments
- Maximum Air Flow 5.6 CFM
- Maximum Air Pressure 150 PSI
- Maximum Voltage 13.8
- Maximum AMP draw 45
- Maximum
- 8 foot 12.0V heavy duty power cables with alligator clips that allow connect directly to the battery easy and quick
- This work horse features a 1/3 horsepower motor makes this one of the largest motors in the portable class
- Built in Thermal cut off switch make sure your system doesn’t overheat and protects your investment
- 24 foot coiled hose with pressure gauge and quick release fittings make this unit easy to use and stow
- Fits nicely in a ballistic nylon bag with caring handles
- Capable of handle the smallest to the largest jobs
(8 reviews) -
4Runner
OME 2885 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2885
- Bar Size : 16.5mm
- Free Height : 395mm
- Number of Turns : 9.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
- These are comparable to Dobinsons C59-302 front coils
(12 reviews) -
Pathfinder R51 (2005-2012)
Dobinsons C45-255 Rear 1.5″ Lifted Coil Springs | Nissan Pathfinder R51 – Pair – Teal
- Suits Nissan Pathfinder R51 Rear, 2005 to 2012 models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Spring rate is 392 LBF/in
- Sold as a Pair
(6 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons MRA45-A645 3-Way Adjustable MRR Rear Shocks Pair | Xterra Frontier
- Suits 2005-2015 Nissan Xterra, 2005-2021 Nissan D40 Frontier and Navara with up to 2.0″ of lift
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 565mm extended, 361mm compressed
- Sold in Pairs
(16 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons GS21-015B Rear Shocks Pair | Isuzu Trooper
- Suits 1992 to 2002 Isuzu Trooper and Acura SLX
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
(8 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD111 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.91+
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.91 And Up FactoryGears
- Usually all models that came with an automatic transmission used 3.91+ gear ratios, but some more modern Toyota and Lexus use 3.73 gears from the factory
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are changing to aftermarket gears, check with that gear manufacturer on which gears to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota 4Runner 5th Gen (no KDSS) 2010-2024
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITHOUT KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(7 reviews) -
ARB
ARB 10000011 – ARB Speedy Seal Tire Repair Kit
- Easily and Quickly repair a tire without removing it from the vehicle
- Lubricant for easier tool insertion
- Additional valve accessories (valve core tool, spare valves and valve caps)
- 40 self vulcanizing repair cords for complete air sealing
- Allen key
- Blade to cut off excess cord
- Tire gauge
- Pliers to remove object that caused the hole
- Heavy Duty Insertion tool
- Heavy Duty Reamer tool
(7 reviews) -
Early FJ Cruiser (2006-2009)
Toyota FJ Cruiser 2007-2014 Long Range Auxiliary Fuel Tank (30gal)
- Suits Toyota FJ Cruiser 2007-2014 with any transmission
- This is an additional tank that goes behind the rear axle, it holds 30 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 30 gallon capacity, fits in the void behind the rear axle and in front of the rear bumper
- 30 gallons plus your original 19 gallon tank gives you a capacity of 49 gallons in total, or you can also add the LRA replacement tank which is 30 instead of 19 gallons, bringing total capacity up to 60 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
Montero Pajero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesDobinsons IMS43-50784 Monotube IFP Rear Shocks Pair | Mitsubishi Montero Pajero 2000+
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 609mm extended, 389mm compressed
(8 reviews) -
Montero Pajero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesDobinsons IMS Lift Kit for Mitsubishi Montero Pajero NM NP NS NT 2000-2019
- Suits 2000-2019 Mitsubishi Montero and Pajero SWB and LWB, gas or diesel engines Models NM, NP, NS, NT, NW
- This does not fit the Montero Sport or Challenger models
- Make your selections below based on if you have a 3-Door SWB Model or 5-door LWB Model
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed IMS (Internal reservoir Monotube Shocks) with Internal Floating Piston – huge 56mm bore size for maximum dampening control
- Adjustable height front struts to fine tune lift height and leveling if needed
- Japanese NOK Multi-Lip seals
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Coil seat should be set at 244mm from the center of the lower bushing to the notch in the coil seat, same as original coil seat height. The coils do the lifting. Fine tuning up or down can be done to tune the height or level the vehicle left to right, if required
- Full 2 year limited warranty, no set rebuild time period
(3 reviews)
