Dobinsons Spring & Suspension

Showing 751–780 of 1041 resultsSorted by popularity

Lighting
FREE SHIPPING
within 48 US States
Dobinsons 8.25″ Zenith 155 Watt LED Driving Light Pair with 12700 Raw Lumens
- 155w (9 – 32v DC), 210mm (8.25″) Diameter to fit most front aftermarket bumper designs
- 4 x 20 Watt 6000K Long Distance Center LED’s
- 15 x 5 Watt 6000K Spread Center LED’s
- 50,000+ Hours Life Span
- Highly resistant to vibration and corrosion
- IP68 Water and Dust Proof Rating
- 12,700 Raw Lumens Per Light, 25,400 Per Pair!!!
- Poly carbonate Smash Resistant Lens
- Heavy Duty Braced Steel Mount
- Wiring Harness sold separately (if needed)
(0 reviews)
$650.00 Add to cart
Fridge/Freezers
FREE SHIPPING
within 48 US States
Dobinsons 4×4 12V Portable 50L Fridge Freezer w/FREE cover
- Utilizes Highest Quality Danfoss BD-35F Compressor – Maximum Cooling Efficiency with Minimal Power Drain
- 12/24V DC, comes with AC 240V external adapter, Includes FREE Cover
- Suitable for car, truck, SUV, RV, Boat, Bus, Ambulance, Travel Trailers
- Integrated 3 stage low voltage cut-off battery protection with auto restart
- High quality insulation to minimize exterior sizing but maximize internal capacity
Rated 5.00 out of 5
(5 reviews)
$1,085.00 Add to cart
Fridge/Freezers
FREE SHIPPING
within 48 US States
Dobinsons 4×4 12V Portable 40L Fridge Freezer
- Utilizes Highest Quality Danfoss BD-35F Compressor – Maximum Cooling Efficiency with Minimal Power Drain
- 12/24V DC, comes with AC 240V external adapter
- Suitable for car, truck, SUV, RV, Boat, Bus, Ambulance, Travel Trailers
- Integrated 3 stage low voltage cut-off battery protection with auto restart
- High quality insulation to minimize exterior sizing but maximize internal capacity
Rated 5.00 out of 5
(5 reviews)
$960.00 Add to cart
Snorkel
FREE SHIPPING
within 48 US States
Dobinsons 4×4 Snorkel Kit | Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985-07 3.4L/4.0L
- Dobinsons SN59-3374 Suits 4.0L Diesel, 4.0L Petrol, 3.4L Diesel
- 1985 to 2007 (Narrow Front) 70 Series Toyota Land Cruisers, including the 70, 71, 73, 74, 75, 78, and 79 Series variant
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
Rated 5.00 out of 5
(8 reviews)
$355.00 Add to cart
Recovery
Dobinsons 4×4 Off Road Rapid Tire Deflator with Gauge and Pouch
- 0-60 PSI Gauge Included at 1PSI Increments, giving easy and accurate readings
- Quick Release Coupling to Allow Pressure Checking at any time during Deflation
- Corrosion Resistant Brass Fittings for Long Life
- Includes Carry Case
- Combine with Dobinsons Air Compressor and Deluxe Tire Repair Kit for a Complete Tire Maintenance Package
Rated 5.00 out of 5
(7 reviews)
$35.00 Add to cart
Awnings
Dobinsons 4×4 Roll Out Awning 4.6FT x 6.5FT Small Size with LED Light
- Measures 1.4M (4.6FT) against the vehicle, extending out 2.0M (6.5FT) away from the vehicle
- Heavy Duty Waterproof, Breathable Rip-stop 420D PU Oxford Polyester
- Could mount to left or right hand side or facing rear, due to small size
- Complete with Fitting Instructions & Tools, Poles, Ropes & Pegs
- Quick, Simple Setup & Pack Up. Manually opens and closes (not automatic)
- Included LED Strip Light
Rated 5.00 out of 5
(10 reviews)
$200.00 Add to cart
Recovery
Dobinsons 4×4 4.75T Rated Bow Shackles / D-Rings with 3/4″ Pin – Pair
- Rated 4.75 Ton Bow Shackles
- 3/4″ Pin
- Sold as a Pair
- Painted – red pin and black bow
Rated 5.00 out of 5
(8 reviews)
$15.00 Add to cart
Dobinsons
Dobinsons Single Caster Wedge 60MM Wide – 3 Degrees
- 3 Degree Caster shim can be used to correct front caster / pinion angle or rear pinion angle on a 60mm wide leaf spring
- Sold individually
- Suits the following Dobinsons leaf spring part numbers:
  
  106-4+3-R
  
  106-5+3-R
  
  B2600-4X4-R
  
  DAI-009-F
  
  DAI-011-R
  
  DAI-015-R
  
  DAI-020-F
  
  DAI-021-R
  
  F77-5+2-R
  
  F77-5L-F
  
  HIL-001-F
  
  HIL-002-F
  
  HIL-003-F
  
  HIL-006-R
  
  HIL-010-F
  
  HIL-034-R
  
  HIL-035-R
  
  HIL-4+2-R
  
  HIL-5+2-R
  
  L19-131-R
  
  L19-132-R
  
  L19-133-R
  
  L21-140-R
  
  L21-141-R
  
  L21-142-R
  
  L39-030-R
  
  L39-031-R
  
  L39-032-R
  
  L45-002-R
  
  L45-003-R
  
  L45-004-R
  
  L45-151-R
  
  L45-152-R
  
  L45-153-R
  
  L45-154-R
  
  L59-040-R
  
  L59-041-R
  
  L59-042-R
  
  L59-110-R
  
  L59-111-R
  
  L59-112-R
  
  L59-120-R
  
  MAZ-003-R
  
  MK-6L-F
  
  MK-7L-F
  
  MQ-6L-F
  
  MQ-7L-F
  
  MQ-UTE-R
  
  MQ-WAG-R
  
  NAV-005-R
  
  NAV-4WD-R
  
  NIS-260-F
  
  RODE-008-R
  
  RODE-011-R
  
  RODE-012-R
  
  RODE-013-R
  
  TOY-470-R
  
  UAZ-004-R
  
  UAZ-006-R
(0 reviews)
$40.00 Add to cart
Dobinsons
Dobinsons 80 Series Coil Spacers Front or Rear
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- All coil spring spacers are sold individually
- Order 2 spacers to lift the left and right side the same amount
- Made of long lasting high quality polyurethane
- The lift height is exactly the amount you will lift from the height you have now
- Perfect fit between OE isolator and coil seat
- Coil spacers cannot be stacked – use only one spacer per coil
Rated 5.00 out of 5
(9 reviews)
From $35.00 Select options
Full Suspension Kits - Jeep TJ
Dobinsons 3″ Basic Lift Kit for Jeep Wrangler TJ 1997-2006
- Suits 1997-2006 Jeep Wrangler TJ and LJ
- Lifts 3″ front and rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
- Shocks are yellow, coil springs are teal
- Photos for illustration purposes
Rated 5.00 out of 5
(8 reviews)
From $1,160.00 Select options
Full Suspension Kits - Tacoma 4th Gen
FREE SHIPPING
within 48 US States
ETA is Spring 2025
Dobinsons 2-3″ MRA 3-Way Adjustable Lift Kit | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma 4×4 Models with coil springs in the back
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose from 2 or 3″ of front lift, and 2″-3″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit leaf spring equipped models
- Coil seat for MRA59-A490 should be set at 251mm (9.9″) from the strut bushing eye
- Front MRA struts assembly instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
(0 reviews)
From $3,300.00 Select options
Full Suspension Kits - Tacoma 4th Gen
FREE SHIPPING
within 48 US States
ETA is Spring 2025
Dobinsons 2-3″ IMS Lift Kit | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma 4×4 Models with coil springs in the back
- Choose from 2 or 3″ of front lift, and 2″-3″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit leaf spring equipped models
- Coil seat for IMS59-60490 should be set at 251mm (9.9″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
- Note: A diff drop kit should be run if you have a base model Tacoma or if you’re running 3″ of lift
(0 reviews)
From $1,910.00 Select options
New Item
250 Series Land Cruiser (2024+)
FREE SHIPPING
within 48 US States
Dobinsons 2-3″ MRA 3-Way Adjustable Lift Kit | Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 4×4 Models
- These specs are based on the 2.4L and 2.7L 4Cyl Engine models
- Choose from 2 or 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Front MRA struts assembly instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
(0 reviews)
From $3,300.00 Select options
New Item
250 Series Land Cruiser (2024+)
FREE SHIPPING
within 48 US States
Dobinsons 2-3″ IMS Lift Kit | Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 4×4 Models
- These specs are based on the 2.4L and 2.7L 4Cyl Engine models
- Choose from 2 or 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat height should be set at 237mm (9.3″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
(0 reviews)
From $1,910.00 Select options
On Backorder
250 Series Land Cruiser (2024+)
ETA is Spring 2025
Dobinsons C59-885V Rear Coil Springs Pair
- Lifts the Rear of a 2024+ Toyota Land Cruiser 250 series 40mm (1.6″) with stock weight up to 110LBS of added weight
- These variable rate coils handle loaded weight better than a liner coil, as they get stronger when they get compressed further
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)
$270.00
Coil Color Clear

Dobinsons C59-885V Rear Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
On Backorder
250 Series Land Cruiser (2024+)
ETA is Spring 2025
Dobinsons C59-816 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with 150-220 constant front end weight (bumper, winch, etc) with the 2.4L or 2.7L gas engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)
$270.00
Coil Color Clear

Dobinsons C59-816 Front Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
On Backorder
250 Series Land Cruiser (2024+)
ETA is Spring 2025
Dobinsons Strut Mounts Pair for Toyota Land Cruiser 250 2024+
- Made specifically for the 4×4 Toyota Land Cruiser 250 Series 2024-2025+
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(0 reviews)
$120.00 Add to cart
On Backorder
Dobinsons
ETA is Spring 2025
Dobinsons C59-869V Rear Coil Springs Pair
- Dobinsons C59-869V Rear Coils for the 2024+ Toyota Tacoma – 2.0″ lift with stock weight, 1.25″ lift with 100lbs constant added weight.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are recommended
(0 reviews)
$270.00
Coil Color Clear

Dobinsons C59-869V Rear Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
On Backorder
Dobinsons
ETA is Spring 2025
Dobinsons Tacoma Strut Mounts Pair for Toyota Tacoma 2024+
- Made specifically for the 4×4 Toyota Tacoma 2024-2025+
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(0 reviews)
$120.00 Add to cart
On Backorder
Exceptions
FREE SHIPPING
within 48 US States
ETA is Spring 2025
Dobinsons MRA59-A490 3-Way Adjustable Front Struts Pair | Tacoma 2024+
- Suits 2024+ Toyota Tacoma
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A490 should be set at 251mm (9.9″) from the strut bushing eye
- Photos for illustration purposes only
- New Dobinsons Strut Mounts should be run with these for strength and longevity
(0 reviews)
$1,410.00 Add to cart
Full Suspension Kits - Prado 90 95
FREE SHIPPING
within 48 US States
Dobinsons Land Cruiser Prado 90 95 MRA Lift Kit
- Suits 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Common installation instructions
- Note: This Prado 90 platform shares the same suspension design as the 3rd Gen Toyota 4Runner, so many descriptions will list the 3rd Gen 4Runner as that’s what these parts are most commonly sold for. However the weight of the Prado 90 is different, so the coil specs have been adjusted to suit the Prado 90.
(0 reviews)
From $2,970.00 Select options
Prado 90 + 95 - RZN VZN KZN KDJ (1996-2002)
FREE SHIPPING
within 48 US States
Dobinsons Land Cruiser Prado 90 95 Snorkel Kit for 1996-2002
- Suits 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models VZJ90, VZJ95 with the 3.4L V6 gasoline engine
- Mounts to the right hand side
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(0 reviews)
$355.00 Add to cart
4Runner 3rd Gen (1996-2002)
Dobinsons C59-303R Rear Lifted Coils | 3rd Gen 4Runner & Prado 90 95 – Pair
- Suits 1996-2002 Toyota 4Runner 3rd Gen and 1996-2002 Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Gives 2″ of lift with 600-800LBS of rear constant weight (rear bumper, drawers, roof rack, tent, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – RED
- 395mm free height, 18mm wire, 388LBF/in spring rate
- Sold in Pairs
(0 reviews)
$270.00 Add to cart
Prado 90 + 95 - RZN VZN KZN KDJ (1996-2002)
Dobinsons Rear Bumper with Tire and Jerry Can Carrier | Prado 90 & 95
- Made for 1996-2002 Toyota Land Cruiser Prado 95 and 95 Series RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Comes standard as Black Powder Coat
- Full bolt on installation to replace your stock rear bumper
- Moves the spare tire off the back door and onto the bumper
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Choose from a single or dual jerry can carrier below
- Watch the video below for how to install it
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(0 reviews)
$2,860.00 Select options
Silverado 1500 (2019-2024)
Dobinsons 2″ IMS Quick Ride Suspension Kit | Silverado + Sierra 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Does not suit Trailboss or AT4 models
- Affordable 2.0″ Lift Suspension System without requiring new rear leaf packs, with 2.6″ Body Shocks!!
- Complete Quick Ride suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to provide comfort and lift
- Choose your desired suspension parts to build the kit best suited to your weight
- Fully rebuildable and re-valvable IMS struts and shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Struts feature clip adjustment levels for fine tuning of lift height
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 231mm (9.07″)
- Photos for illustration purposes
(0 reviews)
From $1,875.00 Select options
Silverado 1500 (2019-2024)
Dobinsons C09-074 Front Coil Springs Pair | Silverado + Sierra 1500 2019+
- Suits 2019-2024 Chevy Silverado 1500 and GMC Sierra 1500 4×4
- Gives 2.0″ of lift on a base model with 160-330LBS of constant front weight (bumper, winch, skid plates), and 1.0″ of lift over Trailboss and AT4 models (which came lifted already) with 160-330LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Matching front Struts
(0 reviews)
$365.00
Coil Color Clear

Dobinsons C09-074 Front Coil Springs Pair | Silverado + Sierra 1500 2019+ quantity
Select options This product has multiple variants. The options may be chosen on the product page
Silverado 1500 (2019-2024)
Dobinsons C09-072 Front Coil Springs Pair | Silverado + Sierra 1500 2019+
- Suits 2019-2024 Chevy Silverado 1500 and GMC Sierra 1500 4×4
- Gives 2.0″ of lift on a base model with stock weight up to 120LBS, and 1.0″ of lift over Trailboss and AT4 models (which came lifted already)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)
$365.00
Coil Color Clear

Dobinsons C09-072 Front Coil Springs Pair | Silverado + Sierra 1500 2019+ quantity
Select options This product has multiple variants. The options may be chosen on the product page
Silverado 1500 (2019-2024)
Dobinsons 2″ Rear Lift Quick Ride Kit | Chevy Silverado GMC Sierra 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 from 2019-2024, Does Not Suit Trailboss or AT4 Models
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended – IMS09-60179
- Only to be used with OE height leaf springs
- Installation Instructions
(0 reviews)
$140.00 Add to cart
Silverado 1500 (2019-2024)
FREE SHIPPING
within 48 US States
Dobinsons IMS09-60179 2.6″ IFP Rear Shocks Pair | Chevy Silverado 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Recommended to run with Dobinsons coils
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 635mm extended, 410mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(0 reviews)
$650.00 Add to cart
Silverado 1500 (2019-2024)
FREE SHIPPING
within 48 US States
Dobinsons IMS09-60178 2.6″ IFP Front Struts Pair | Chevy Silverado 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- Recommended to run with Dobinsons coils
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 231mm (9.07″)
- Photos for illustration purposes
(0 reviews)
$720.00 Add to cart