Your cart is currently empty!
Armor
Showing 31–60 of 189 resultsSorted by popularity
-
Tundra 3rd Gen (2022-2025+)RCI Full Skid Package | Tundra 2022+ & Sequoia 2023+
- Suits Tundra 2022-2025+ 4×4 Models Only (not for 2WD), and 2023-2025+ Toyota Sequoia 4×4
- Choose from 10 gauge steel or 1/4″ 5052 Aluminum
- Includes front, transmission/transfer-case skid plates
- Please note that some images show our optional Cat Guards, which are NOT included with this item
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Not compatible with 4″+ drop bracket lift kits (does work with all 1-3″ coilover lifts)
- Made in the USA.
(8 reviews) -
80 Series Land Cruiser (1990-1997)
ARB 3411050 Toyota 80 Series Land Cruiser Front Winch Bumper 1990-1997
- Suits all Toyota Landcruiser 80 Series models from 1990 to 1997 and Lexus LX450
- Enhances the look of the 80 Series as well as providing awesome protection against animal strikes or rear end accidents
- Full width single piece steel welded bumper, includes all mounting hardware
- Compatible with a range of low mount winches without an integrated solenoid pack
- Includes driving light mounts as well as CB antenna mounts, welded in place
- Durable black powder coat finish
- Includes recessed turn signals in the bumper that you can wire into your OEM harness for additional visibility
- Not as heavy as it looks, just over 100lbs out of the packaging
- Ships by truck freight – we will be in touch with you about shipping details
- Fitment of Warn XD9000 & M8000 winch requires special spacer kit – ARB part no. 3500050.
- Best suited to a 10k or 12k low-mount winch, due to overall truck weight and size
- We offer a large variety of Winches as well
- Shipping is calculated in the shopping cart and it ships to your house
(7 reviews) -
ArmorDobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Brackets, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals, Fog Lights, and all Required Hardware for Installation
- Includes filler panels for under the headlights to fill the gap to the bumper. Old bumper cover does not get cut or get reused
- Separate Winch Cradle System, making installation faster
- Parking sensor, front camera and radar compatible (can’t mount parts in front of them)
- Cannot reuse headlight washers with this bumper
- Supplied Black, but can be painted by your paint shop
- Suits 12000 LB Low Mount Winches with non-integrated control box
- Installation instructions
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(4 reviews) -
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 86LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold with a stinger top tube added as pictured in some of the photos
- We offer a large variety of Winches as well
(9 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesBody Mount Relocation Kit | Toyota Tacoma 2016-2023
- Suits Toyota Tacoma 2016-2023
- 1/4″ Thick CNC cut and formed steel
- Design includes guard for body mount bushing and bolt
- Moves body mount completely behind the firewall
- Instructions available
- Product requires welding for installation. Welding should be done by an experienced welder
- Installation Instructions
(3 reviews) -
Accessories
RCI Rear FJ Cruiser Diff Skid Plate
- Suits Toyota FJ Cruiser – all years
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(4 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons Front Winch Bumper for Toyota 4Runner 2014-2024
- Suits 5th Gen Toyota 4Runner from 2014-2024 (will not fit 2010-2013)
- Winch compatible, up to 12,000 LB winches
- Driving Light Mounts
- Optional Fog Lights – Here for more details
- Optional Front Driving Lights (as shown in photos) – Here for more details
- Cutting of the original front plastic bumper is required
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches – requires offset fairlead
- Installation Instructions
- Truck freight shipping is usually to the nearest freight terminal, or commercial address with forklift
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(10 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota 4Runner 5th Gen (no KDSS) 2010-2024
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITHOUT KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Winch Bumper | Toyota Land Cruiser 80 Series 1990-1997
- Suits all 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop
- Suits 10000-12000 LB Low Mount Winches
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Rear BumpersFREE SHIPPING
within 48 US StatesDobinsons Rear Bumper for Toyota Land Cruiser 200 Series 2008-2021
- For Toyota Land Cruiser 200 Series from 2008 to 2021
- DOES NOT SUIT MODELS WITH LANE ASSIST
- Comes standard as Black Powder Coat (customer can have his local paint shop color-match as some photos show)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(13 reviews) -
Tundra 2nd Gen (2007-2021)
RCI Tundra Fuel Tank Skid Plate | 2007-2021 Tundra
- Suits 2nd Gen Tundra (2007-2021)
- 26 gallon skid is NOT compatible with 8 foot bed models
- Protects the vulnerable fuel tank from accidental puncture
- Compatible with nearly all 4×4 trucks from 2007-2021 (26 gallon skid is NOT compatible with 8 foot bed models).
- Requires Toyota rear fuel tank support strap from off-road model to bolt on skid plate
- Same mounting locations as factory skid plate but substantially sturdier metal construction
- Smooth, flat surface that easily slides over obstacles. No exposed bolt heads on skid plates on 26gal fuel skid plate
- 38gal fuel tank skid plate now incorporates welded bolt protection rings standard
- Direct bolt on addition, no drilling
- Includes heavy duty black powder coating for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Made in the USA.
(4 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Raw Aluminum
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Raw aluminum
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates
RCI Tacoma Engine Skid Plate | 2005-2023 Tacoma
- Fits: 2005-2023 Toyota Tacoma
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- ALL Tacoma front skid plates now come standard with oil filter access door, an essential feature if you have a 2016 or newer truck, and also maintains compatibility on 2005-2015 models
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Designed to accommodate ALL vehicles with OR without differential drop kits, and does so without compromise.
- Differential cage provides unsurpassed protection, while allowing skid plate to sit tighter to vehicle than competitors
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling requiredÂ
- MADE IN USA
(3 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Transmission Skid Plate | Tacoma 2005-2023
- Fits all Toyota Tacoma from 2005-2023
- *Fits 4×4 4.0L/3.5L Access Cab and Double Cab trucks only
- Protects transmission, second and third cross-members
- Excellent addition or replacement of light duty OEM skid plates (which do not provide any coverage of transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with OEM TRD PRO aluminum engine skid plate. No modifications required!
- Finish: Heavy Duty Black Powder Coat or Bare Aluminum
- Made in the USA
(4 reviews) -
Sale!Accessories
RCI FJ Cruiser Rock Sliders
- Fits: Toyota FJ Cruiser all years
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM is now standard on outer rails for uncompromised strength
- Fully gusseted on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and guarantees a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5 degree upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for top surface
- Easy install with only basic hand tools
- All hardware provided (grade 5 & 8 where applicable)
- Now comes standard with our signature low profile rear kickout
- Made to order from your selections below
- MADE IN USA
(5 reviews) -
Skid Plates
RCI Catalytic Guards | 2003-24 4Runner / FJ / GX
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2003-2024 4Runner, FJ Cruiser (all years), GX470 and GX460 (all years)
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
(2 reviews) -
60 62 Series Land Cruiser (1980-1989)
Dobinsons Front Winch Bumper for Toyota Land Cruiser 60 62 Series
- Suits Toyota Land Cruiser 60 and 62 Series
- Winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(5 reviews) -
Front Bumpers
Dobinsons Front Winch Bumper for Lexus GX470
- Suits Lexus GX470 from 2003 to 2009 with Fender Flares
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop.
- Suits 10000 – 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Installation Instructions
- Ships to the nearest freight terminal on a pallet for you to pick up unless you add home delivery (extra cost). We will be in touch with that delivery address
(3 reviews) -
Front BumpersFREE SHIPPING
within 48 US StatesAll Pro 2014-2024 4Runner LoPro Bumper
- Suits 2014-2024 5th Gen Toyota 4Runners, but not Limited Models
- BUILT 100% IN THE USA!!
- 3/16″ steel faceplate and 1/4″ steel winch plate
- 4 1/2″ x 10″ winch mounting pattern
- Compatible with most 8-12k winches with remote mount solenoid box
- Zinc plated hardware
- Finished in a durable black powder coat
- Designed to fit 30″ single-row light bars
- Compatible with Toyota Safety Sense (TSS) and Multi-Terrain Monitoring system (MTM)
- Cutting the plastic bumper is required to install this product
- Weighs 74lbs
- NOTE:Â Not compatible with Limited Edition 4Runners
- Optional side wing supports
- Download Instructions
- **We are not able to ship this outside the 48 US States
(3 reviews) -
Skid Plates
RCI Lexus GX470 & GX460 V8 Transmission Skid Plate
- Fits USA spec Lexus GX470 and Lexus GX460 V8 Models 2003-2023
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
Tacoma 3rd Gen (2016-2023)
RCI Full Skid Plate Set | 2005-2023 Tacoma
- Includes front, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- All transmission skid plates now come standard with center gussets, a feature exclusive to RCI. Due to the location of the transmission skid plate and spanning a two foot gap, skid plates in this area are prone to getting bent. With this plate that is no longer the case!
- ALL Transfer-case cross-members come standard with black powdercoat finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
(9 reviews) -
Armor
Dobinsons 70 Series Winch Bumper | Land Cruiser 70 Series 1985-2007
- See below for full vehicle compatibility list
- Winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop
- Suits 10000-12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Note: LJ versions of the 70 series (LJ71, LJ73, etc.) may have different bolt patterns in the frame horn ends, so drilling and adapting to the holes of the bumper may be required
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Rear BumpersFREE SHIPPING
within 48 US StatesDobinsons GX460 Rear Bumper with Tire and Jerry Can Carrier
- Suits Lexus GX460 from 2010-2023
- Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes double Jerry can carrier and single spare tire carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Does not include any hitch or towing ability. Designed to work around standard type tow hitch below rear cross member
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- 2010-2013 requires slight notch above bumper to clear swing outs.
- 2014 and up requires heavy modification to the OEM bumper to clear swing outs.
- Video detailing fitment steps on a 2014+ Model –Â https://youtu.be/LJPSsFSor7k
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(14 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Catalytic Guards | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+Â
- Covers open space between frame and transmission skid plate
- Compatible with both steel and aluminum RCI transmission skid plates – REQUIRED
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installs in minutes
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
- Transmission skid plate is REQUIRED in order to run these catalytic guards
- Please note, some images show the transmission skid plate that is necessary for installing the catalytic guards however the skid plate is not included with the catalytic guards
(0 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Transfer Case Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce MaxÂ
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid Model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Transmission Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce MaxÂ
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Engine Skid Plate | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling requiredÂ
- Made in the USA
- INSTALL GUIDE (Click Here)
(0 reviews) -
Skid Plates - JL WranglerFREE SHIPPING
within 48 US StatesTax Return Sale, 10% off
Use Coupon TAXTIMERusty’s JL Wrangler 3.6L Engine Skid
- Suits Jeep JL Wrangler 2018-2023 Models
- Protects the vulnerable engine oil pan
- Adds necessary protection for doing any sort of off roading
- Protect your expensive investment – engines aren’t cheap!!
- Rusty’s Skid Plate is constructed of 3/16″ thick laser-cut steel
- CNC formed for an exact fit
- Integrated access panel for oil changes
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
- Verify with the attached photos and a visual inspection of your Jeep to make sure you order the correct parts!!
(9 reviews) -
Trail-Gear
Rock Defense 80 Series Rear Bumper 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made out of 1020 DOM (1.75″ X .120″ wall)
- Includes D-ring mounts and rear top step plate
- Mounting plates made out of 3/8″ and 1/4″ laser cut steel
- Includes all new mounting hardware
- Can use factory tow package if you desire (sits below the bumper)
- Unpainted steel finish
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- When fitting on a Lexus LX450, the sides could get close or touch the plastic body cladding
(9 reviews) -
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper w/Stinger 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Includes welded on stinger bar as the top tube
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 94LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold without a stinger top tube added as pictured in some of the photos
- We offer a large variety of Winches as well
(9 reviews)
