Your cart is currently empty!
Accessories
Showing 91–120 of 475 resultsSorted by popularity
-
Sale!
RecoveryFREE SHIPPING
within 48 US States23” 5/8” Soft Recovery Shackle With A Breaking Strength Of 44,500 Lbs.
- 23 Inch
- 44,000 Lbs breaking Strength
- 5/8 Inch diameter
- Dyneema Synthetic Fiber that is lighter and stronger than traditional shackles
- 3 inch Class 2 Diamond Knot provides a quick and extremely secure retention
- Super lightweight material wont overload recovery bag
- Our standard soft shackles feature a protective sleeve that can be used for any
- All OVs shackles come with a quick deploying storage bag with a pull cinch top
- OVS soft shackles are safer to use because it doesn’t store kinetic energy when under-load
- Soft shackles are rattle free and won’t damage bumpers and other recovery rigging
- All OVS soft shackles come with a Limited Lifetime Warranty
- Quick and easy to use and requires no tools
- Can be used as a snatch block when used with OVS recovery ring
(8 reviews) -
Sale!
AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 6.5FT Awning (2.0M) – With Black Cover
- 53 Square Feet of Covered Shelter
- 280G Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover With 10 Lb Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
What’s included:
- Nomadic 6.5FT Awning With 2 Built-In Aluminum Rafters
- 2 Pivoting and Telescoping Aluminum Poles
- 2 Sets of Shock Cord
- 2 Heavy Duty Stakes
- Travel Cover
- 2 Heavy Duty Mounting Brackets and Hardware
- Nylon Reinforced Tie Down Kit
- Opened: 98.5 inch x 78.5 inch (8.2FT out x 6.5FT wide)
(8 reviews) -
80 Series Land Cruiser (1990-1997)
ARB 3411050 Toyota 80 Series Landcruiser Front Winch Bumper
- Suits all Toyota Landcruiser 80 Series models from 1990 to 1997 and Lexus LX450
- Enhances the look of the 80 Series as well as providing awesome protection against animal strikes or rear end accidents
- Full width single piece steel welded bumper, includes all mounting hardware
- Compatible with a range of low mount winches without an integrated solenoid pack
- Includes driving light mounts as well as CB antenna mounts, welded in place
- Durable black powder coat finish
- Includes recessed turn signals in the bumper that you can wire into your OEM harness for additional visibility
- Not as heavy as it looks, just over 100lbs out of the packaging
- Ships by truck freight – we will be in touch with you about shipping details
- Fitment of Warn XD9000 & M8000 winch requires special spacer kit – ARB part no. 3500050.
- Best suited to a 10k or 12k low-mount winch, due to overall truck weight and size
- Shipping is calculated in the shopping cart and it ships to your house
(7 reviews) -
Hats Shirts Patches
Dobinsons Snap Back Richardson 112 Trucker Hat
- Richardson original 112 Trucker hat
- Dobinsons PVC logo emblem up front
- Embroidered IMS and MRR logos on the sides
- Snap back adjustment, one size fits most
- Available in black or grey
(0 reviews) -
ARB
ARB 171503 Air Compressor Manifold Kit
- Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
- Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
- This kit includes a manifold body with mounting bracket, BSP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
- This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
- Manifold body with mounting bracket
- 2 x 1/8″ BSPP ports for installation of up to 2 x Air Locker solenoids
- 2 x 1/4″ NPT ports, one to be used as an input and the second could be used for installation of a pump up kit (ARB 171302)
- 1 x high temperature resistant Teflon stainless steel braided hose with heavy duty JIC4 fittings
- 2 x JIC4 – 1/4″ NPT nipples to connect the included hose to the compressor outlet and manifold kit input
- 2 x M6 hex head bolt and nylon lock-nuts for securing the manifold kit
(3 reviews) -
Accessories
Dobinsons 4×4 Portable 12V High Output Air Compressor Kit with Bag + Hose and Gauge
- 12 Volt, Heavy Duty
- Air Compressor
- Thermal Overload Protection
- Air Flow: 72L/min – Maximum Pressure: 150 psi
- Single 40mm Piston
- 2.4m Power Cable with Battery Clips
- 5m PU Hose
- In-Line Pressure Gauge & Fuse
- Rubber Anti-Vibration Feet
- Hi-Temp 7.5m P.A Air Hose
- Quick Release Tyre Chuck
- Removable Air Filters
- Permanent Magnetic Motor
- Removable Base for Permanent Mounting
- Includes 3 Nozzle Adaptors & Carry Bag
(10 reviews) -
Snorkel
Dobinsons 4×4 Replacement Snorkel Head – 85mm / 3.34″
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Does NOT include replacement hose clamp
(0 reviews) -
Recovery
Dobinsons 4×4 Deluxe Tire Repair Plug Kit with Digital Gauge
- Repair Tire punctures without removing the tire or wheel from vehicle
- Easy to use, Plastic Carry Case, Digital Tire Gauge, Steel Insertion Needle, Hardened Steel Reaming Tool
- 30 Self-Vulcanizing Tire Seals, Lubricant, 2 Allen Keys, Valve Core Tool, Spare Valve Cores and Caps
- Ideal to use with Dobinsons 4×4 Air Compressor, part AC80-3808
- Stores easily under or behind a seat inside vehicle
(9 reviews) -
ArmorETA is Spring 2025
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Brackets, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals, Fog Lights, and all Required Hardware for Installation
- Includes filler panels for under the headlights to fill the gap to the bumper. Old bumper cover does not get cut or get reused
- Separate Winch Cradle System, making installation faster
- Parking sensor, front camera and radar compatible (can’t mount parts in front of them)
- Cannot reuse headlight washers with this bumper
- Supplied Black, but can be painted by your paint shop
- Suits 12000 LB Low Mount Winches with non-integrated control box
- Installation instructions
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(4 reviews) -
Recovery
Dobinsons 4×4 Kinetic Snatch Tow Recovery Rope 28900 LBS (13100 KG) 30FT
- Rated at 28,900 LBS (13,100 KG), 7/8″ Diameter (22mm), 30FT Total Length
- UV & Water Resistant, made from High Quality 66 Grade Nylon
- Lightweight high strength Double Braided 24 Strand Design
- Spliced & Stitched End Loops with Protective Sleeves
- NATA Approved, Australian Laboratory Tested
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Overhead MOLLE Panel | 2016-2023
- Suits 2016-2023 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 3″ (at rear dome light)
- Bolt-on installation, bolts where the factory grab handles were (not to be reinstalled)
- Approximate Molle mounting area is 9″ x 37″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
(12 reviews) -
Roof RacksFREE SHIPPING
within 48 US StatesRCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
180° AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 180 LTE 180 Degree Awning
- The Overland Vehicle Systems Nomadic 180LTE Awning is the perfect solution for anyone in need of reliable, free-standing shelter.
- Made with quality materials, this awning provides up to 59 square feet of coverage and can be used at a full 180 degrees.
- The Overland Vehicle Systems Nomadic 180LTE Awning is easy to set up
- The Nomadic 180LTE Awning is supported by 4 integrated drop-down legs, 4 integrated 1″1/8″ tubular heavy-duty rafters supported on a Heavy-Duty Aluminum Frame.
- The Nomadic 180LTE Awning is made from 280G poly cotton rip stop material with heat sealed seams, easily folds, and secures in a 1000g PVC cover.
- This Nomadic 180LTE awning features a universal “L” mounting bracket solution that can be mounted onto a variety of roof racks, making it perfect for your off-road rig.
- The awning comes with a 4-year warranty, ensuring your satisfaction.
- Poles expand to 7.5FT tall
- Measurements are listed in the attached photos
- Closed Dimensions: 72″ long x 6″ wide x 7″ high, 33.5 LBS
- Optional wall sold separately
(8 reviews) -
Snorkel
Safari Snorkel for Land Cruiser 80 Series Snorkel 1991-1997
- Suits Toyota Land Cruiser 80 Series 1991-1997 and Lexus LX450
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
- We also offer the Dobinsons Snorkel
(23 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesBody Mount Relocation Kit | Toyota Tacoma 2016-2023
- Suits Toyota Tacoma 2016-2023
- 1/4″ Thick CNC cut and formed steel
- Design includes guard for body mount bushing and bolt
- Moves body mount completely behind the firewall
- Instructions available
- Product requires welding for installation. Welding should be done by an experienced welder
- Installation Instructions
(3 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesRCI Rear FJ Cruiser Diff Skid Plate
- Suits Toyota FJ Cruiser – all years
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(4 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons Front Winch Bumper for Toyota 4Runner 2014-2024
- Suits 5th Gen Toyota 4Runner from 2014-2024 (will not fit 2010-2013)
- Winch compatible, up to 12,000 LB winches
- Driving Light Mounts
- Optional Fog Lights – Here for more details
- Optional Front Driving Lights (as shown in photos) – Here for more details
- Cutting of the original front plastic bumper is required
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches – requires offset fairlead
- Installation Instructions
- Truck freight shipping is usually to the nearest freight terminal, or commercial address with forklift
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(10 reviews) -
Sale!70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 - 87-96
Dobinsons Full Length Roof Rack for Land Cruiser 76 and 78 Series including LJ78 and KZJ78
- Suits Toyota Land Cruiser 76 and 78 Series including LJ78 and KZJ78 with Gutter Rails on the roof line
- Will not suit high-roof models or PRP fiberglass tops
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes gutter mount fitting kit to secure the rack to your factory gutter rails
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
(0 reviews) -
Camping EquipmentFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Cargo Box Storage Drawer w/Fridge Slide & Working Station
- Marine grade carpet that will not stain or mildew
- 4 Tie downs points that will allow you to secure your load or can be used to stack an additional box
- Two Stage dual powder coat with a 5 Year finish warranty
- Stainless steel mil spec bearings that will last you a lifetime
- Removal drawer with quick release
- Top completely slides forward to access hard to reach areas
- Top can be used as a Fridge Slide
- Feature HDPE (high-density polyethylene plastic) workstation that can act as a cutting board
- Over-sized lockable paddle lock that fits your hand nicely
- Marine grade stainless steel hardware
- Download Instructions
- Thickness Outside Case – 0.075 Inches
- External Dimensions – 25 1/4 x 16 7/16 x 13 1/4 Inches (without Tie Down Points Attached)
- Weight – 61 lbs
- Internal Drawer Dimensions – 22 1/4 x 14 x 8 7/16 Inches
- Cutting Board – 18 7/8 x 12 Inches
- Top Slide Dimensions – 25 1/4 x 16 7/16 Inches
- Storage Drawer Weight Capacity – 132.28 lbs
- Top Slide Weight Capacity – 132.28 lbs
- Cutting Board Weight Capacity – 33 lbs
(6 reviews) -
Sale!RecoveryFREE SHIPPING
within 48 US StatesOVS Soft Shackle 7/16″ 41,000 lb. With Collar – 22″ With Storage Bag
- Dyneema Synthetic Fiber that is lighter and stronger than traditional shackles
- Over Sized Heavy Duty Collar provides a quick and extremely secure retention
- Super lightweight material wont overload recovery bag
- Our standard soft shackles feature a protective sleeve that can be used for any
- All OVs shackles come with a quick deploying storage bag with a pull cinch top
- OVS soft shackles are safer to use because it doesn’t store kinetic energy when under-load
- Soft shackles are rattle free and won’t damage bumpers and other recovery rigging
- All OVS soft shackles come with a Limited Lifetime Warranty
- Quick and easy to use and requires no tools
- Can be used as a snatch block when used with OVS recovery ring
(8 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOVS Receiver Mount Recovery Shackle 3/4″ 4.75 Ton Rated
- Cross drilled so it can be used vertically or horizontally
- Includes rated 3/4″ shackle
- Includes pin and clip to slide mount into a 2″ receiver hitch
- All black
(3 reviews) -
Camping EquipmentFREE SHIPPING
within 48 US StatesOVS LED Light Adjustable Dimmer With Adaptor Kit 47″ for Awning & Tent
- 47″ with energy efficient LED Technology
- Fully adjustable dimmer switch to control brightness
- Built in threads for added security and protection from the elements
- Tongue and groove slide-in design
- Compatible with our Awning & Tent organizer
- Powered through your vehicles auxiliary power outlet
- Specifications: DC12V/1A, 860lm
(3 reviews) -
Sale!Air CompressorsFREE SHIPPING
within 48 US StatesEGOI Portable Air Compressor System 5.6 CFM With Storage Bag + Hose + Attachments
- Maximum Air Flow 5.6 CFM
- Maximum Air Pressure 150 PSI
- Maximum Voltage 13.8
- Maximum AMP draw 45
- Maximum
- 8 foot 12.0V heavy duty power cables with alligator clips that allow connect directly to the battery easy and quick
- This work horse features a 1/3 horsepower motor makes this one of the largest motors in the portable class
- Built in Thermal cut off switch make sure your system doesn’t overheat and protects your investment
- 24 foot coiled hose with pressure gauge and quick release fittings make this unit easy to use and stow
- Fits nicely in a ballistic nylon bag with caring handles
- Capable of handle the smallest to the largest jobs
(8 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota 4Runner 5th Gen (no KDSS)
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITHOUT KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(7 reviews) -
ARB
ARB 10000011 – ARB Speedy Seal Tire Repair Kit
- Easily and Quickly repair a tire without removing it from the vehicle
- Lubricant for easier tool insertion
- Additional valve accessories (valve core tool, spare valves and valve caps)
- 40 self vulcanizing repair cords for complete air sealing
- Allen key
- Blade to cut off excess cord
- Tire gauge
- Pliers to remove object that caused the hole
- Heavy Duty Insertion tool
- Heavy Duty Reamer tool
(7 reviews) -
Rear Drawers
Dobinsons Universal Wing Side Panel Kit for Rear Storage Drawers
- Complete universal wing kit to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, all oversized, need to be cut to fit
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Photo attach represents modified universal side wing panel kit added to RD80-1000 drawers in a 60 Series Land Cruiser
- Note: You will have to modify these to fit your vehicle, requiring cutting tools and making your own templates.
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Winch Bumper | Toyota Land Cruiser 80 Series
- Suits all 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop
- Suits 10000-12000 LB Low Mount Winches
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Accessories
Dobinsons Single Drawer – Universal Mount – Medium Size
- Measures 900mm long x 500mm wide x 275mm high, 75 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address. Ground shipping isn’t available due to potential product damage
(3 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons 100 Series Snorkel Kit for Land Cruiser 1998-2007
- 100 Series Snorkel Kit – Suits Lexus LX470 and Toyota Land Cruiser 100 Series 1998-2007 Models
- Smooth body, no words or logo on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(9 reviews) -
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 86LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold with a stinger top tube added as pictured in some of the photos
(9 reviews)
