Bilstein

Showing 1–30 of 36 resultsSorted by popularity

Bilstein
Bilstein 33-313146 – 5100 Series Rear Shock
- Suits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, 2006-2017 FJ Cruiser
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.03 Inch
- Compressed Length (IN): 14.91 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
Rated 5.00 out of 5
(3 reviews)
$112.00 Add to cart
Bilstein
Bilstein 24-328258 Front 5100 Series Strut
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber
- Suits 2010-2024 Toyota 4Runner and 2010-2017 Toyota FJ Cruiser, 2010-2023 Lexus GX460
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Includes 1 strut, 1 strut boot, 1 top nut, 1 coil seat, 1 circlip for coil seat height
- Collapsed Length (in.) 17.5
- Extended Length (in.) 22.3
- Travel Length (in.) 4.80
- Shaft Diameter: 14mm
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: Yes
- Not for X-REAS suspension
- NO TOP BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
- Link to matching rear shock
Rated 5.00 out of 5
(3 reviews)
$160.00 Add to cart
Bilstein
Bilstein 24-324359 Front 5100 Series Strut
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber
- Suits 2005-2015 Toyota Tacoma, 2003-2009 4Runner, Lexus GX470, 2006-2009 FJ Cruiser
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Includes 1 strut, 1 strut boot, 1 top nut, 1 coil seat, 1 circlip for coil seat height
- Collapsed Length (in.) 17.030
- Extended Length (in.) 22.560
- Travel Length (in.) 5.53
- Shaft Diameter: 14mm
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: Yes
- Not for X-REAS suspension
- NO TOP BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
Rated 5.00 out of 5
(3 reviews)
$160.00 Add to cart
Full Suspension Kits - GX460
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for Lexus GX460
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2010-2023 Lexus GX460
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $544.00 Select options
Bilstein
Bilstein 24-261425 Front 5100 Series Strut
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber
- Suits 2001-2007 Toyota Sequoia 4×4 and 2000-2006 Toyota Tundra 4×4
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 18.35 Inch
- Compressed Length (IN): 13.23 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- Rod Diameter (IN): 1/2 Inch
- Valving Type: Self-Adjusting Deflective Disc Valving
- Rod Material: Steel
- Body Material: Steel
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: Yes
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- To be used with the stock coil spring the vehicle came with
- Installation Instructions
Rated 5.00 out of 5
(3 reviews)
$160.00 Add to cart
Full Suspension Kits - GX470
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for Lexus GX470
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Lexus GX470
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil springs
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $544.00 Select options
Bilstein
Bilstein 33-230337 – 5125 Series Rear Shock | 2005-2023 Tacoma
- Suits 2005-2023 Toyota Tacoma 4×4, with 2-3.5″ of lift
- Suits 2-3.5″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 24.38 Inch
- Compressed Length (IN): 15.01 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: Yes
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
- Recommended to run with extended brake lines and extended bump stops
Rated 5.00 out of 5
(3 reviews)
$112.00 Add to cart
4Runner 5th Gen (2010-2024)
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for 5th Gen Toyota 4Runner 2010-2024
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2010-2024 Toyota 4Runner
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $544.00 Select options
Sequoia 1st Gen (2001-2007)
Bilstein 24-276061 – 5100 Series Rear Shock | 1st Gen Sequoia
- Suits 2001-2007 Toyota Sequoia 4×4 Rear
- Suits 0-1″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.96 Inch
- Compressed Length (IN): 15.06 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: Yes
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
Rated 5.00 out of 5
(3 reviews)
$112.00 Add to cart
Struts + Shocks - Tundra 2nd Gen
Bilstein 24-286244 – 5100 Series Rear Shock 0-2″ lift | Tundra
- Suits 2007-2021 Toyota Tundra 4×4 Trucks – Rear
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 26.81 Inch
- Compressed Length (IN): 17.34 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
Rated 4.71 out of 5
(7 reviews)
$112.00 Add to cart
Struts + Shocks - Tundra 2nd Gen
Bilstein 24-232173 Front 5100 Series Strut | Tundra Sequoia
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber
- Suits 2007-2021 Toyota Tundra 4×4 Trucks and 2008-2022 Toyota Sequoia 4×4 SUV’s
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Includes 1 strut, 1 strut boot, 1 top nut, 1 coil seat, 1 circlip for coil seat height
- Collapsed Length (in.) 17.77
- Extended Length (in.) 24.21
- Travel Length (in.) 6.44
- Shaft Diameter: 13mm
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
Rated 4.71 out of 5
(7 reviews)
$160.00 Add to cart
Full Suspension Kits - 4th Gen 4runner
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for 4th Gen 4Runner 2003-2009
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Toyota 4Runner 4th Gen
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil springs
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $544.00 Select options
Sale!
Full Suspension Kits - Sequoia 1st Gen
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for 1st Gen Sequoia 4×4
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2001-2007 Toyota Sequoia 1st Gen 4×4
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- Reuse original coil springs
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $534.00 Select options
Full Suspension Kits - FJC Late
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for FJ Cruiser 2010+
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2010-2017 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $544.00 Select options
Bilstein
FREE SHIPPING
within 48 US States
Bilstein 47-310025 Front 6112 Series Kit
- Bilstein 6112 Series Ride Height Adjustable Front Coilover Kit
- Suits 2010-2024 Toyota 4Runner, 2010-2023 Lexus GX460
- Sold as a set, 1 per vehicle
- Photo shows all parts included (does not include top strut mounts)
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 60mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: No
- Coil Springs Included: Yes
- Spring Rate: 600 LBF/in
- Not for X-REAS suspension
- Strut mounts are not included – USE THIS KIT
- Installation Instructions
- Suitable matching rear shocks
Rated 5.00 out of 5
(5 reviews)
$842.00 Add to cart
Bilstein
Bilstein 24-263108 Front 5100 Series Strut | 2016-23 Tacoma
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber
- Suits 2016-2023 Toyota Tacoma
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Photo shows what is included
- Collapsed Length (in.) 17.58
- Extended Length (in.) 22.22
- Travel Length (in.) 4.64
- Shaft Diameter: 14mm
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: Yes
- For new upper strut mounts – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
- Suitable matching rear shocks
Rated 5.00 out of 5
(3 reviews)
$160.00 Add to cart
Tundra 2nd Gen (2007-2021)
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for Tundra 2007-2021
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2007-2021 Toyota Tundra 4×4
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED, Add them here
- Reuse original coil springs
- Installation Instructions
Rated 4.90 out of 5
(10 reviews)
From $544.00 Select options
Full Suspension Kits - FJC Early
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for FJ Cruiser 2006-2009
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2006-2009 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $544.00 Select options
Shocks + Struts - 3rd Gen 4Runner
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for 3rd Gen 4Runner 1996-2002
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 1996-2002 Toyota 4Runner and Land Cruiser Prado 90
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil springs
- Installation Instructions
- Kit photo for illustration purposes, see additional photos for actual struts and shock photos
Rated 5.00 out of 5
(7 reviews)
From $544.00 Select options
Exceptions
FREE SHIPPING
within 48 US States
Bilstein 47-310872 Front 6112 Series Kit | 4Runner 1996-2002
- Bilstein 6112 Series Ride Height Adjustable Front Coilover Kit
- Suits 1996-2002 Toyota 4Runner and Land Cruiser Prado 90
- Sold as a set, 1 per vehicle
- Lifts 0-2.3″
- Includes pair of 60mm struts, pair of coils, and pair of top strut nuts
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 60mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: No
- Coil Springs Included: Yes
- Strut mounts are not included – NEW ONES HERE
- Installation Instructions
- Link to rear Bilstein shock for the same vehicle
Rated 5.00 out of 5
(4 reviews)
$842.00 Add to cart
Bilstein
Bilstein 24-249966 Rear 5100 Series Shock | 4Runner 1996-2002
- Suits 1996-2002 Toyota 4Runner and Land Cruiser Prado 90
- Bilstein B8 5100 – Suspension Shock Absorber
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Suits 0-2″ of lift
- Includes 1 shock, 1 shock boot, upper mount pieces, as pictured
- Collapsed Length (in.) 12.91
- Extended Length (in.) 20.79
- Shaft Diameter: 13mm
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm
- Internal Design: Mono tube
- Boot Included: Yes
- Reuse original coil spring or Dobinsons
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
$112.00 Add to cart
Shocks + Struts - 3rd Gen 4Runner
Bilstein 24-248730 Front 5100 Series Strut | 4Runner 1996-2002
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber
- Suits 1996-2002 Toyota 4Runner and Land Cruiser Prado 90
- Provides 0-2.3″ Front Lift
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Includes 1 strut, 1 strut boot, 1 top nut, 1 coil seat, 1 circlip for coil seat height
- Collapsed Length (in) : 13.66
- Extended Length (in) : 18.27
- Finish : Zinc Plated
- Reservoir : No
- Body Design : Snap Ring Grooved Body (Coilover)
- Body Diameter (id) : 46mm
- Spring Seat Included : Yes
- Adjustable Damping : Non-Adjustable
- To be used with the stock coil spring the vehicle came with
- WARRANTY INFORMATION
Rated 5.00 out of 5
(7 reviews)
$160.00 Add to cart
New Item
Bilstein
Bilstein 24-329217 Rear 5100 Series Shock | 2022+ Tundra
- Bilstein 5100 Series Ride Height Adjustable Rear Shock Absorber
- Suits 2022-2025+ Toyota Tundra 4×4 Trucks
- Suits 0-1″ Rear Lift
- Will not suit TRD Sport Package
- Will not suit vehicles with factory airbag suspension
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Collapsed Length (in) : 16.59
- Extended Length (in) : 25.06
- Collapsed Length (mm) : 421.4
- Extended Length (mm) : 636.5
- Finish : Zinc Plated
- Reservoir : No
- Body Design : Smooth Body (Non-coilover)
- Body Diameter (id) : 46mm
- Adjustable Damping? : Non-Adjustable
- To be used with the stock coil spring the vehicle came with
- WARRANTY INFORMATION
- Photo for illustration purposes only, not of actual part number
(0 reviews)
$112.00 Add to cart
On Backorder
New Item
Bilstein
Bilstein 24-329200 Front 5100 Series Strut | 22+ Tundra, 23+ Sequoia
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber
- Suits 2022-2025+ Toyota Tundra 4×4 Trucks and 2023-2025+ Toyota Sequoia 4×4 SUV’s
- Provides 0-2.3″ Front Lift
- Will not suit TRD Sport Package
- Will not suit vehicles with factory airbag suspension
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Includes 1 strut, 1 strut boot, 1 top nut, 1 coil seat, 1 circlip for coil seat height
- Collapsed Length (in) : 15.91
- Extended Length (in) : 20.22
- Collapsed Length (mm) : 404.0
- Extended Length (mm) : 513.5
- Finish : Zinc Plated
- Reservoir : No
- Body Design : Snap Ring Grooved Body (Coilover)
- Body Diameter (id) : 46mm
- Spring Seat Included : Yes
- Adjustable Damping : Non-Adjustable
- To be used with the stock coil spring the vehicle came with
- WARRANTY INFORMATION
- Photo for illustration purposes only, not of actual part number
(0 reviews)
$160.00 Add to cart
Bilstein
Bilstein 25-325096 – 5160 Series Rear Right Shock
- Suits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, 2006-2017 FJ Cruiser
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.5 Inch
- Compressed Length (IN): 14.25 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: Yes
- Includes Dust Shield: Yes
- Includes Hardware: Yes
- Includes Boot: Yes
- Estimated Install Time (Hours): 1
- Sold individually – This is the Right (passenger) side rear shock
- Link to matching left side shock
Rated 4.71 out of 5
(7 reviews)
$300.00 Add to cart
Bilstein
Bilstein 25-311211 – 5160 Series Rear Left Shock
- Suits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, 2006-2017 FJ Cruiser
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.5 Inch
- Compressed Length (IN): 14.25 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: Yes
- Includes Dust Shield: Yes
- Includes Hardware: Yes
- Includes Boot: Yes
- Estimated Install Time (Hours): 1
- Sold individually – This is the Left (driver’s) side rear shock
- Link to matching right side shock
Rated 4.43 out of 5
(7 reviews)
$300.00 Add to cart
Shocks + Struts – Sequoia 2nd Gen
Bilstein 33-187280 Rear 5100 Series Shock | Sequoia 2008-2022
- Bilstein B8 5100 – Suspension Shock Absorber
- Suits the rear of 2008-2022 Toyota Sequoia 4×4 SUV’s
- For 0-1″ of lift ONLY!!!
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Includes 1 shock, 1 shock boot, upper mount pieces, as pictured
- Collapsed Length (in.) 13.71
- Extended Length (in.) 19.29
- Travel Length (in.) 5.58
- Shaft Diameter: 13mm
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm
- Internal Design: Mono tube
- Boot Included: Yes
- Reuse original coil spring or Dobinsons stock height C59-475
- Installation Instructions
Rated 4.71 out of 5
(7 reviews)
$112.00 Add to cart
Bronco (2021-2025+)
FREE SHIPPING
within 48 US States
Bilstein 6100 Series Shock Kit for Ford Bronco
- Bilstein 6100 Series Ride Height Adjustable Shock Absorber Kit for front and rear
- Suits 2021+ Ford Bronco 2-door and 4-door
- Front Lift Height: 0.7-2.3″ – With Sasquatch Package Only
- Rear Lift Height: 0-1.1″ – With Sasquatch Package Only
- SOLD AS A KIT, INCLUDES 4 STRUTS FOR FRONT AND REAR
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Strut length: Specs are down below
- Body Color: Silver
- Quantity: 4 Struts
- Valving Type: Non Adjustable Valving
- Ride Height Adjustable: Yes
- Rod Material: Steel
- Body Material: Steel
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: Yes
- Includes Boot: No
- Spring Seat: Use Original
- Estimated Install Time (Hours): 3
- Reuse original coil springs and strut mounts
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $1,300.00 Select options
Bronco (2021-2025+)
FREE SHIPPING
within 48 US States
Bilstein 5100 Series Shock Kit for Ford Bronco
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit for front and rear
- Suits 2021+ Ford Bronco 2-door and 4-door
- Front Lift Height Without Sasquatch Package: 1-2.9″; With Sasquatch Package: 0-1.7″
- Rear Lift Height Without Sasquatch Package: 1-2.5″; With Sasquatch Package: 0-1.4″
- SOLD AS A KIT, INCLUDES 4 STRUTS FOR FRONT AND REAR
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Strut length specs are down below
- Body Color: Silver
- Quantity: 4 Struts
- Valving Type: Non Adjustable Valving
- Ride Height Adjustable: Yes
- Rod Material: Steel
- Body Material: Steel
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: Yes
- Includes Boot: No
- Spring Seat: Use Original
- Estimated Install Time (Hours): 3
- Reuse original coil springs and strut mounts
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $640.00 Select options
Bronco (2021-2025+)
Bilstein 24-313988 Rear 5100 Series Strut for Ford Bronco
- Bilstein 5100 Series Ride Height Adjustable REAR Shock Absorber
- Suits 2021+ Ford Bronco 2-door and 4-door
- Rear Lift Height Without Sasquatch Package: 1-2.5″; With Sasquatch Package: 0-1.4″
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Photo shows what is included
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 25.55 Inch
- Compressed Length (IN): 17.11 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Cross Pin
- Body Color: Silver
- Quantity: Single
- Rod Diameter (IN): 1.81 Inch
- Valving Type: Non Adjustable Valving
- Ride Height Adjustable: Yes
- Rod Material: Steel
- Body Material: Steel
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: Yes
- Includes Boot: No
- Estimated Install Time (Hours): 0.5
- To be used with the stock coil spring the vehicle came with
- WARRANTY INFORMATION
- Installation Instructions
- Matching Front Strut
Rated 5.00 out of 5
(3 reviews)
$160.00 Add to cart