Your cart is currently empty!
LX470
Showing 31–55 of 55 resultsSorted by popularity
-
SPCFREE SHIPPING
within 48 US StatesSPC 25455 | UCA’s for Land Cruiser 100 Series & LX470 Pair
- Suits 1998-2007 Toyota Landcruiser 100 Series and 1998-2007 Lexus LX470
- Compatible with or without AHC
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
(13 reviews) -
100 Series Land Cruiser IFS (1998-2007)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable 100 Series MRA Kit | Land Cruiser IFS V8 Gas 1998-2007
- For 1998-2007 Land Cruiser 100 Series and Lexus LX470
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- By default, no rear coils are included, but you can easily select and add them
- You can also remove the torsion bars if you don’t want those
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- 3-way adjustable valving shocks – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
- Standard Kit Includes 2 Front MRA Shocks, 2 Front Torsion Bars, 2 Rear MRA Shocks, and 2 Rear Coil Springs – select your preferences
(8 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME Heavy Duty Torsion Bar Pair for Land Cruiser 100 Series V8
- For V8 Gasoline/Petrol powered Land Cruisers from 1998 to 2007
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(7 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Tubular UCA Pair | Land Cruiser 100 LX470 – No Ball Joints
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- This purchase does not include any ball joints. Use OEM or aftermarket OE sized upper ball joints
- Not compatible with AHC, it does not have the bracket in place
- Includes both left and right hand side arms, OE style rubber frame bushings installed in the arms, all joint caps, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Product Video
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
(8 reviews) -
100 Series Land Cruiser IFS (1998-2007)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A782 3-Way Adjustable MRA Front Shocks Pair | 100 Series (0-2″ Lift)
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- 455mm extended, 313mm compressed
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Reservoir mounts to the empty holes forward of the shock on both sides
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
(13 reviews) -
Rear Drawers
Dobinsons DW59-023K Wing Side Panel Kit for 100 Series
- Suits Toyota Land Cruiser 100 Series and Lexus LX470
- Complete wing kit to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | Land Cruiser 100 Series
- Suits 1998-2007 Land Cruiser 100 Series
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORSEQ replaces the rear OEM bump stops and ABSTOF replaces the fronts on the Land Cruiser 100 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(13 reviews) -
Suspension
Air Lift 60728 Rear Helper Air Springs (Airbags) | 80 Series 100 Series Sequoia
- Air Lift 60728 Suits Toyota Landcruiser 80 and 100 Series and Lexus LX450 and LX470, Toyota Sequoia 2001-2007 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles up to 2.5″ of lift
- Works with 0-2.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
(3 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Toyota Land Cruiser 100 Series 1998-2004 Long Range Auxiliary Fuel Tank (24gal)
- Suits Toyota Landcruiser 100 Series 1998-2004 with the any engine option, gas or diesel
- This is an additional tank that goes where the factory spare tire sat, it holds 24 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 24 gallon capacity, fits where OE spare tire sat (requires spare relocation)
- 24 gallons plus your original 25 gallon tank gives you a capacity of 49 gallons in total, or you can also add the LRA replacement tank which is 40 instead of 25 gallons, bringing total capacity up to 64 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- 24 gallon tank is built the same as the 40gal, but with better clearance and departure angle (hangs down less)
- Part Number TLC100AX24GAL-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-223VB Rear Coil Springs | Land Cruiser – Pair Black
- 80 SERIES (1990-1997) and Lexus LX450 – Dobinsons c59-223v – 1.75″ lift with up to 220lbs weight
- 100 SERIES (1998-2007) and Lexus LX470 – Dobinsons C59-223V – 1-1.25″ lift, variable rate, with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 19mm wire diameter, 445/455mm free height, variable rate
- Sold in Pairs
(0 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Toyota Land Cruiser 100 Series 1998-2005 Long Range Replacement Fuel Tank V8 (40gal)
- Suits Toyota Landcruiser Toyota 100 Series 1998-5/2005 IFS V8 Gas models
- This will only suit up to 5/2005 build date models due to changes in the vehicle after that. You must verify your build date prior to ordering
- For US-spec 100 series with a single original tank (not dual tanks)
- Replacement tank – 40 gallon capacity replaces original 25 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 4 hours
- Part Number TLC100IFSEFR
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons 100 Series Snorkel Kit for Land Cruiser 1998-2007
- 100 Series Snorkel Kit – Suits Toyota Land Cruiser 100 Series 1998-2007 Models
- Smooth body, no words or logo on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(9 reviews) -
LX470FREE SHIPPING
within 48 US StatesPowerbrake X-Line Lexus LX470 Big Brake Kit 1998-2007
1998-2007 Front Lexus LX470 Big Brake Kit Includes:
- X-Line front billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 13.7″ x 1.33″ 48-vane discs
- 48 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Photos are used to show detail and appearance, actual product for this vehicle may vary
(3 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
TimbrenFREE SHIPPING
within 48 US StatesTimbren TORSEQ SES Suspension Enhancement System | Toyota and Lexus SUV’s
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series, Sequoia 2001-2007
- This is only for use with stock height rear coils – will not work correctly on a lifted vehicle
- Great alternative to airbags, never needs any air or maintenance yet provides the same function
- Reduces sag, sway, and roll when towing and hauling
- Comfortable ride, loaded or unloaded
- DIY installation
- Bolts in where the factory bump stops go
- Zero post-installation maintenance
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(14 reviews) -
ARB
OME 2864 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2864
- Bar Size : 19 mm
- Free Height : 480/490 mm
- Number of Turns : 7.2
- Coil Weight (each): 7.8 Kg | 17.2 lbs
- Spring Rate : 320 lbs
- Sold in Pairs
(22 reviews) -
ARB
OME 2863 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2863
- Bar Size : 18 mm
- Free Height : 505/515mm
- Number of Turns : 7.0
- Coil Weight (each): 6.9 Kg | 15.8 lbs
- Spring Rate : 250 lbs
- Sold in Pairs
(20 reviews) -
Performance Upgrades - 100 SeriesFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | 100 Series Front
- Suits Toyota Land Cruiser 100 Series 1998-2007 Front and Lexus LX470 1998-2007 Front
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(3 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Full Length Land Cruiser 100 Series Roof Rack
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Includes 100 Series specific mounting rails for installation
- Photo shows gutter mounts still attached to the rack, but they are not used on the 100 Series
- Will cover roof rack, but it will still open
- US-model 100 Series have a roof trim in the tracks of the roof that needs to be peeled back and trimmed off to access the forward-most mounting hole in the roof
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes vehicle-specific fitting kit to secure the rack to your roof
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
(0 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Toyota Land Cruiser 100 Series 1998-2004 Long Range Auxiliary Fuel Tank (40gal)
- Suits Toyota Landcruiser 100 Series 1998-2004 with the any engine option, gas or diesel
- This is an additional tank that goes where the factory spare tire sat, it holds 40 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 40 gallon capacity, fits where OE spare tire sat (requires spare tire relocation)
- 40 gallons plus your original 25 gallon tank gives you a capacity of 65 gallons in total, or you can also add the LRA replacement tank which is 40 instead of 25 gallons, bringing total capacity up to 80 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- 24 gallon tank is built the same as the 40gal, but with better clearance and departure angle (hangs down less) – Click here to see that tank
- Part Number TLC100AX-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
Front Bumpers
Dobinsons 100 Series Front Bumper | Land Cruiser 100 Series IFS 1998 to 2007
- Suits all year models of Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. Removable Top Tubes
- Supplied Black, but can be painted by your paint shop. Suits 10000 – 12000 LB Low Mount Winches.
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Upper Control Arms
SPC 35102 Replacement Ball Joint Set for 25455 25465 25480 25490
- Replaces Ball Joints on SPC Arms – 25455, 25465, 25480, 25490
- Will not work on OEM or any other brand aftermarket upper control arms (UCA’s)
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Suits 2003-2024 Toyota 4Runner, 2006-2017 Toyota FJ Cruiser, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- Suits 1998-2007 Toyota Landcruiser 100 Series and 1998-2007 Lexus LX470
- Sold in Pairs
- Fully seated boot to keep grease in and contaminants out for a maintenance-free joint
- High strength steel forging with offsets provides camber & caster adjustability
- One piece polymer race tests like OE and provides low & smooth turning torque
- Oversized ball generates 80˚ of articulation with a 25% increase in neck cross section vs. OE for added strength
- Modern grease formula ensures quiet and smooth operation with reduced wear for extended life
- Extended threads on ball stud will work with most popular spindle gusset kits
- These ball joints are reverse compatible and a direct replacement for the SPC upper control arm sets
- Installation Instructions
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-169B Rear Coil Springs | Land Cruiser – Pair Black
- 80 SERIES (1990-1997) and Lexus LX450 – Dobinsons C59-169 1.75″ with up to 220lbs weight
- 100 SERIES (1998-2007) and Lexus LX470 – Dobinsons C59-169 – 1″ lift, linear rate, with stock weight. For slightly above OE stock height. Ideal if someone is doing AHC removal but doesn’t want to add lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold in Pairs
- 465/475mm free height, 227 LB spring rate
(0 reviews) -
ARB
OME 2862 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2862
- Bar Size : 17 mm
- Free Height : 460/470 mm
- Number of Turns : 9.0
- Coil Weight (each): 7.8 Kg | 17.2 lbs
- Spring Rate : 170-260 lbs
- Variable Rate Springs
- Sold in Pairs
(21 reviews) -
ARB
OME 2860 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2860
- Bar Size : 17 mm
- Free Height : 480/490mm
- Number of Turns : 6.88
- Coil Weight (each): 6 Kg | 13.2 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
(26 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD152 Rear Air Locker Toyota 9.5″ 32 Spline
- For Use only with Toyota 9.5″ 12 Bolt 32 spline Rear Axle
- Suits multiple vehicles, the full list is down below
- Will not suit 5.7L Tundra engines, as they use a larger rear differential (RD146)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(16 reviews)
