Your cart is currently empty!
Coil Springs
Showing 181–210 of 366 resultsSorted by popularity
-
Sidekick/Tracker (1988-1998)
Dobinsons C57-013 Rear Coils | Suzuki Sidekick and Tracker SWB – Pair
- Dobinsons C57-013 Rear 30mm Lifted Coil Springs for the Suzuki Sidekick and Tracker SWB (Short Wheel Base) 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(16 reviews) -
Sidekick/Tracker (1988-1998)
Dobinsons C57-012 Front Coils | Suzuki Sidekick and Tracker – Pair
- Dobinsons C57-012 Front 40mm Lifted Coil Springs for the Suzuki Sidekick and Tracker 1.6L 8 Valve engine 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(16 reviews) -
Montero Pajero NM NP NS NT 2000+
Dobinsons C43-126 Front 1.75″ Lift Coil Springs | Montero Pajero 2000+ (Heavy Load) – Pair
- 1.75-2.0″ lift with 110-220LBS constant weight on a 2000+ Mitsubishi Pajero and Montero with a gasoline engine
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(18 reviews) -
Montero Pajero NM NP NS NT 2000+
Dobinsons C43-124 Front 1.75″ Lift Coil Springs | Montero Pajero – Pair
- 1.75″ lift with stock weight on a Mitsubishi Montero 2000-06 USA model
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(12 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2850 Front Coil Springs | Land Cruiser 80 and 105 Series – Pair
- OME Part Number 2850
- Bar Size : 16.5 mm
- Free Height : 495/505 mm
- Number of Turns : 9.0
- Coil Weight (each): 6.2 Kg | 13.6 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
(25 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2864 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2864
- Bar Size : 19 mm
- Free Height : 480/490 mm
- Number of Turns : 7.2
- Coil Weight (each): 7.8 Kg | 17.2 lbs
- Spring Rate : 320 lbs
- Sold in Pairs
(22 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2863 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2863
- Bar Size : 18 mm
- Free Height : 505/515mm
- Number of Turns : 7.0
- Coil Weight (each): 6.9 Kg | 15.8 lbs
- Spring Rate : 250 lbs
- Sold in Pairs
(20 reviews) -
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-565V – Pair
- Dobinsons C19-565V Variable Rate Springs Suits Ford Bronco:
- 2 Door – Base, Big Bend, Black Diamond, Outer Banks – 110-220Lb Load
- 2 Door – BL, Wildtrack, First Edition – 110-220Lb Load
- 4 Door – Base, Big Bend, Black Diamond, Outer Banks – 110-220Lb Load
- 4 Door – BL, Wildtrack, First Edition- 0-110lb Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50099
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(13 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page - Dobinsons C19-565V Variable Rate Springs Suits Ford Bronco:
-
Bronco (2021-2025+)
Dobinsons Ford Bronco Front Coils | C19-564 – Pair
- Dobinsons C19-564 Suits Ford Bronco:
- 2 Door – Base, BL 2.3L, Black Diamond, Outer Banks – 2.7L – 110-200lb Load
- 2 Door – BL, Wildtrack, FE 2.7L – Stock Load
- 4 Door – Base, BB, Outer Banks – 110-200lb Load
- 4 Door – BS, BL 2.3L – Stock Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50098
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(18 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page - Dobinsons C19-564 Suits Ford Bronco:
-
200 Series Land Cruiser ARMORED
Dobinsons C59-586 B7 1500KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-586 – Front Coils for Level B7 Armor with 1500KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.Â
- Sold as a Pair – marked side specific for installation
(1 review) -
200 Series Land Cruiser ARMORED
Dobinsons C59-566 B7 1100KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-566 – Front Coils for Level B7 Armor with 1100KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.Â
- Sold as a Pair – marked side specific for installation
(2 reviews) -
Sequoia 3rd Gen (2023-2025+)
Dobinsons C59-823V Rear Coil Springs Pair
- Dobinsons C59-823V Rear Coils for the 2023+ Toyota Sequoia
- Lifts 2″ with 440LBS constant load on a standard model and 1″ with 440LBS constant load on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- This also fits the 2021+ Land Cruiser 300 Series, gives 30mm lift with 280-400KG constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(2 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
200 Series Land Cruiser ARMORED
Dobinsons C59-587 B7 1400-1500KG Armored Land Cruiser 200 Series Rear Coils – Pair
- C59-587 – Level B7 Armor with 1400-1500KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.Â
- Sold as a Pair – marked side specific for installation
(2 reviews) -
Coilover Coils
Dobinsons Coilover Coils – 3.0″ x 14″ x 550LB Rate – Pair
- Dobinsons C92-3014550 Coil Specs:
-
- Inner Diameter – 3.0″
- Free Length – 14″
- Spring Rate – 550lb/in
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Flat Ground Top and Bottom
- These coilover coils require specific coilover struts to run – they are not suited to OEM Struts
- Durable Powder Coat Finish – Teal
- Sold in Pairs
(8 reviews) -
Coilover Coils
Dobinsons Coilover Coils – 3.0″ x 14″ x 600LB Rate – Pair
- Dobinsons C92-3014600 Coil Specs:
-
- Inner Diameter – 3.0″
- Free Length – 14″
- Spring Rate – 600lb/in
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Flat Ground Top and Bottom
- These coilover coils require specific coilover struts to run – they are not suited to OEM Struts
- Durable Powder Coat Finish – Teal
- Sold in Pairs
(9 reviews) -
4Runner 2nd Gen (1990-1995)
Dobinsons C59-165 Rear 2″ Coils for Toyota 4Runner 2nd Gen Heavy Load – Pair
- Suits 2nd Gen Toyota 4Runner 1990-1995
- C59-165 – 2″ lift with 330LBS constant rear end load – linear rate coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 2″ lift is 2″ over OE stock height. Keep this in mind, as these old trucks will be sagged below stock height
(9 reviews) -
Ranger 2019-2023 (US Spec)
Dobinsons C19-534 Front Coils for Ford Ranger USA Spec – 1.75″ Heavy Load – Pair
- Suits 2019-2023 Ford Ranger USA Spec – lifts 1.75″ with 150-220LBS added weight
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- Photo shows how they would look when installed on the IMS19-50096 Struts
(6 reviews) -
Ranger 2019-2023 (US Spec)
Dobinsons C19-532 Front Coils for Ford Ranger USA Spec – 1.75″ – Pair
- Suits 2019-2023 Ford Ranger USA Spec – lifts 1.75″ with stock weight
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- Each pair of coils lift 1.75″ over stock height
- Photo shows how they would look when installed on the IMS19-50096 Struts
(5 reviews) -
4Runner 4th Gen (2003-2009)
OME 2895E Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2895E
- Bar Size : 17 mm
- Free Height : 375mm
- Number of Turns : 6.75
- Coil Weight (each): 5.4 Kg | 11.9 lbs
- Spring Rate : 260 lbs
- Sold in Pairs
(9 reviews) -
4Runner 4th Gen (2003-2009)
OME 2884 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2884
- Bar Size : 16.5mm
- Free Height : 390mm
- Number of Turns : 9.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
- These are comparable to Dobinsons C59-300 coils
(13 reviews) -
Explorer U502 AWD 2012+
Dobinsons C19-439 2″ Lift Rear Coils for Ford Explorer U502 2012-21 AWD 3.5L 3.7L – Pair
- 2″ rear lift coils for a Ford Explorer AWD 3.5L and 3.7L from 2012-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(4 reviews) -
Explorer U502 AWD 2012+
Dobinsons C19-438 2″ Lift Front coils for Ford Explorer U502 2012-21 AWD 3.5L 3.7L – Pair
- 2″ front lift coils for a Ford Explorer AWD 3.5L and 3.7L from 2012-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(5 reviews) -
Coil Springs
Dobinsons C45-422 Front 30mm lift Coil Springs for Nissan Pathfinder 4×4 R52 – Pair
- C45-422 Front coils will lift 30mm over original height with the added weight of 110-180LBS of constant weight, such as a bumper or winch
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
(5 reviews) -
Coil Springs
Dobinsons C45-420 Front 30mm lift Coil Springs for Nissan Pathfinder 4×4 R52 – Pair
- C45-420 Front coils will lift 30mm over original height with no added front weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Photo is not of actual coil springs for this vehicle
- Sold in Pairs
(16 reviews) -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons Front Lifted Coil Options for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Jeep Cherokee AD1 is Sport and Latitude models generally
- Jeep Cherokee AD2 is Trailhawk models generally
- Choose the appropriate coils to suit your model and added weight
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold in pairs
(17 reviews) -
WK Grand Cherokee (2005-2010)
Dobinsons C21-054 Coil Springs | Jeep Commander 2006-10 and Grand Cherokee WK 2005-10 (Front 2″ Lift) – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(8 reviews) -
Coil Springs
Dobinsons C23-195 Rear Coil Springs for Honda CRV 2012-2016 35mm 1.5″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
Coil Springs
Dobinsons C23-072 Front Coil Springs for Honda CRV 1997-2001 30mm 1.25″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(4 reviews) -
Dobinsons
Dobinsons C59-175V Rear Coil Springs Pair | Land Cruiser
- Dobinsons C59-175V suit the following vehicles and give the specified amount of lift:
- Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997 2.0″ lift with up to 660LBS, or 3″ lift with up to 330LBS
- Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 2.5″ lift with up to 220lbs constant Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(3 reviews) - Dobinsons C59-175V suit the following vehicles and give the specified amount of lift:
-
Discovery Series II (1999-2004)
Dobinsons C51-052 Lifted Front Coil Springs Pair | Discovery II
- Dobinsons C51-052 suit the following vehicles and give the specified amount of lift:
- Land Rover Discovery Series II 1999-2004 FRONT 45mm lift with 40-100KG added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(3 reviews) - Dobinsons C51-052 suit the following vehicles and give the specified amount of lift: