Your cart is currently empty!
Panhard Rods + Track Bars
Panhard Rods, also known as Track Bars
Showing all 18 resultsSorted by popularity
-
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Front Adjustable Panhard Rod | Land Cruiser 80 Series LHD
- Suits Land Cruiser 80 Series and Lexus LX450
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- For left hand drive models
(8 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(7 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Panhard Rod for 22+ Tundra, 23+ Sequoia
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022-2025+ and Toyota Sequoia 2023-2025+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(11 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 200 250 300 GX550
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+, and Toyota Land Cruiser 300 Series 2022+, and 2024+ Toyota Land Cruiser 250 Series, and Lexus GX550
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(5 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Track Bar 0-2″ Lift | Jeep TJ XJ ZJ
- Fits: Jeep Wrangler TJ and LJ, Cherokee XJ and Grand Cherokee ZJ with 0-2″ lift only
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .188″ wall DOM tubing
- Has enough adjustment to accommodate a 0-2″ of lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(9 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesRusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator
- Fits:Â 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
(7 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Front Adjustable Panhard Rod | 80 Series Right Hand Drive
- FOR RIGHT HAND DRIVE MODELS ONLY (Japanese import, etc.)
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Image for illustration purposes only
(5 reviews) -
Ram 1500 (2009-2018)FREE SHIPPING
within 48 US StatesAdjustable Rear Dodge Ram Track Bar | 2009-2018
- Suits 2009-2018 Ram 1500 2WD / 4WD
- The track bar is constructed from 4130 chromoly tubing and utilizes heavy duty FK 3/4″ rod ends with 17-4 stainless spacers
- These high grade materials and hardware will prevent the track bar from bending which is common with the factory track bar
- As for lifting the rear of these vehicles it requires adjusting the track bar to keep the axle centered under the chassis
- The rod ends have right hand and left hand threading to allow for easy on vehicle adjustments
- The Dirt King track bar comes preset at factory length and bolts in place using the factory bolts
- Your alignment tech will adjust the length to get the axle centered
- Made in the USA
(10 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Panhard Rod for 2024+ Tacoma
- Suits Toyota Tacoma 2024+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(0 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Track Bar 2.5-5″ Lift | Jeep TJ XJ ZJ
- Fits: Jeep Wrangler TJ and LJ, Cherokee XJ and Grand Cherokee ZJ with 2.5-5″ lift only
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .188″ wall DOM tubing
- Has enough adjustment to accommodate between 2.5-5″ of lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(7 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesRusty’s Front Track Bar Mount Brace | JK Wrangler
- Fits:Â 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
(10 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Adjustable JK Front Track Bar | Jeep JK Wrangler
- Fits: 2007-2018 Jeep JK Wrangler Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings at both ends
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(5 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Adjustable JK Rear Track Bar | Jeep JK Wrangler
- Fits: 2007-2018 Jeep JK Wrangler Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings at both ends
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(11 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Adjustable JL Rear Track Bar | Jeep JL Wrangler
- Fits: 2018-Current Jeep JL Wrangler Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings at both ends
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(7 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Adjustable Gladiator Rear Track Bar | Jeep JT Gladiator
- Fits: 2020-Current Jeep JT Gladiator Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings at both ends
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(5 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Track Bar | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings on one end and a heim on the other
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(10 reviews) -
Bronco (2021-2025+)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Panhard Rod for Ford Bronco 2021+
- Suits Ford Bronco 2021-2023+ (not sport models)
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 0-4″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Photo for illustration purposes
(3 reviews)
