Your cart is currently empty!
Early FJ Cruiser (2006-2009)
Showing 91–120 of 158 resultsSorted by popularity
-
AccessoriesRCI Rear FJ Cruiser Diff Skid Plate
- Suits Toyota FJ Cruiser – all years
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(4 reviews) -
4RunnerOME 2885 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2885
- Bar Size : 16.5mm
- Free Height : 395mm
- Number of Turns : 9.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
- These are comparable to Dobinsons C59-302 front coils
(12 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD111 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.91+
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.91 And Up FactoryGears
- Usually all models that came with an automatic transmission used 3.91+ gear ratios, but some more modern Toyota and Lexus use 3.73 gears from the factory
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are changing to aftermarket gears, check with that gear manufacturer on which gears to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Early FJ Cruiser (2006-2009)
Toyota FJ Cruiser 2007-2014 Long Range Auxiliary Fuel Tank (30gal)
- Suits Toyota FJ Cruiser 2007-2014 with any transmission
- This is an additional tank that goes behind the rear axle, it holds 30 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 30 gallon capacity, fits in the void behind the rear axle and in front of the rear bumper
- 30 gallons plus your original 19 gallon tank gives you a capacity of 49 gallons in total, or you can also add the LRA replacement tank which is 30 instead of 19 gallons, bringing total capacity up to 60 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDirt King Performance Lower Control Arms Pair – 4th Gen T4R Early FJC GX470 non-KDSS 2003-2009
- Suits 2003-2009 Toyota 4Runner 2WD / 4WD, 2003-2009 Lexus GX470 4WD, 2007-2009 Toyota FJ Cruiser 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesHigh Angle Outer CV Boot Kit | 05-23 Tacoma 10-24 4Runner GX460 FJ Cruiser
- High Angle Outer CV Boot Kit for Toyota Tacoma 2005-2023, Toyota 4Runner 2010-2024, Toyota FJ Cruiser 2006-2014, and Lexus GX460
- The small end (axle side) of the boot will tightly fit on stock axles without requiring a clamp, although we do provide them in the kit in case you need them
- The large end (CV side) fits over the flange portion of the stock CV joint and is tightened with a clamp
- These are high angle CV boots, so they look different from OEM and they fit tighter as well
- Includes the following:
- Qty 2 – High Angle Outer CV Boots
- Qty 2 – CV Grease Packets
- Qty 4 – Ear-Type CV-Joint Clamps – required CV boot clamp pliers, not included
(8 reviews) -
Apache OffroadFREE SHIPPING
within 48 US StatesApache Offroad AX2 IFP Rear Long Travel Shocks Pair | 4Runner FJ GX470 GX460
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 2.5-3.5″ of lift – LONG TRAVEL
- REQUIRES THE USE OF DOBINSONS OR APACHE LONG TRAVEL REAR COILS, regular coils will simply fall out
- REQUIRES EXTENDED REAR CENTER BRAKE LINES
- REQUIRES EITHER APACHE BUMP STOP EXTENSIONS OR DUROBUMPS 5.25″ BUMP STOP REPLACEMENTS. SPACER MUST BE USED WITH TIMBREN OR OTHER BRAND BUMPS
- IF EQUIPPED – KDSS – We have ran LT rear on KDSS trucks, without issue, though it will limit your travel without additional modification.
- Direct Bolt on Installation
- Includes upper bushings and washers, and lower bushings already pressed in
- Includes shock boots to protect the shock shaft
- Proprietary high-Zinc content paint coating for superior protection against rock chips and abrasion damage
- Nitrogen Charged Monotube Design
- Internal Floating Piston- Separates the oil and nitrogen to prevent shock fade
- Fully rebuildable and revalveable
- Linear Valving
- Hardened Chrome Piston shaft- resists rock damage and corrosion
- Precision Japanese CNC machined, High Flow Piston
- Heavy Duty Ultra Low Friction Japanese 3 Stage Seal System
- High Quality German Oil
- Heavy Duty Lower Leg
- Hardened Rubber Lower Bushing provides a long and quiet life
- Heavy Duty 1/8″ (3mm) DOM wall thickness
- 2 Year Warranty
- 438mm Compressed, 720mm Extended
- SOLD IN PAIRS – Includes new washers and bushings for the top, and lower bushings are pressed in
(10 reviews) -
Dobinsons
Dobinsons UCA Ball Joint Cap Cover for Tubular UCA’s
- Suits all Dobinsons Tubular UCA’s
- Fits the UCA’s made for Tacoma, 4Runner, GX470, GX460, LC100, LC200, Ranger, Hilux, Fortuner
- Machined ball joint cap with o-ring to seal the top of a ball joint
- Black with Dobinsons logo engraved in it
- Sold individually
(6 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren TORSEQ SES Suspension Enhancement System | Toyota and Lexus SUV’s
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series, Sequoia 2001-2007
- This is only for use with stock height rear coils – will not work correctly on a lifted vehicle
- Great alternative to airbags, never needs any air or maintenance yet provides the same function
- Reduces sag, sway, and roll when towing and hauling
- Comfortable ride, loaded or unloaded
- DIY installation
- Bolts in where the factory bump stops go
- Zero post-installation maintenance
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(14 reviews) -
ExcludedFREE SHIPPING
within 48 US StatesOME Upper Control Arms Pair – 2003-2024 4Runner FJ GX470 GX460
- Suits Toyota 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joints
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- 3 Year Manufacturers Warranty
- Made in Vietnam
(12 reviews) -
Sale!Accessories
RCI FJ Cruiser Rock Sliders
- Fits: Toyota FJ Cruiser all years
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM is now standard on outer rails for uncompromised strength
- Fully gusseted on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and guarantees a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5 degree upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for top surface
- Easy install with only basic hand tools
- All hardware provided (grade 5 & 8 where applicable)
- Now comes standard with our signature low profile rear kickout
- Made to order from your selections below
- MADE IN USA
(5 reviews) -
Skid Plates
RCI Catalytic Guards | 2003-24 4Runner / FJ / GX
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2003-2024 4Runner, FJ Cruiser (all years), GX470 and GX460 (all years)
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
(2 reviews) -
4Runner 4th Gen (2003-2009)
OME 2895 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2895
- Bar Size : 16.5 mm
- Free Height : 390mm
- Number of Turns : 6.21
- Coil Weight (each): 4.6 Kg | 10.1 lbs
- Spring Rate : 260 lbs
- Sold in Pairs
(13 reviews) -
4Runner 4th Gen (2003-2009)
OME 2889 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2889
- Bar Size : 16.5 mm
- Free Height : 400mm
- Number of Turns : 6.21
- Coil Weight (each): 4.6 Kg | 10.1 lbs
- Spring Rate : 260 lbs
- Sold in Pairs
(11 reviews) -
4Runner 4th Gen (2003-2009)
OME 2886 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2886
- Bar Size : 17.5mm
- Free Height : 402mm
- Number of Turns : 10.6
- Coil Weight (each): 5.9 Kg | 13 lbs
- Spring Rate : 660 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
(7 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD132 Air Locker Toyota Lexus 8″ 10 bolt 30 Spline
- For Use With Toyota 8″ 10 bolt 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470 – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(7 reviews) -
Early FJ Cruiser (2006-2009)
Toyota FJ Cruiser 2007-2014 Long Range Replacement Fuel Tank (30gal)
- Suits Toyota FJ Cruiser 2007-2014 with the any automatic transmission ONLY
- This is a replacement tank that replaces your OE fuel tank, it holds 30 gallons instead of the stock 19 gallons and fills the same way an OE tank fills
- 30 gallon capacity, replaces the original tank
- LRA also offers an auxiliary rear tank that is 30 gallons, so if that is added with this replacement tank, you could have 60 gallons of fuel capacity, 41 gallons more than stock!!
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 3 hours
- Part Number TLCFJCRURR-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDirt King Performance Lower Control Arms Pair – 5th Gen T4R Late FJC GX460 non-KDSS 2010-2024
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Apache OffroadFREE SHIPPING
within 48 US StatesApache Offroad AX2 IFP Rear Shocks Pair | 4Runner FJ GX470 GX460
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- Direct Bolt on Installation
- Includes upper bushings and washers, and lower bushings already pressed in
- Includes shock boots to protect the shock shaft
- Proprietary high-Zinc content paint coating for superior protection against rock chips and abrasion damage
- Nitrogen Charged Monotube Design
- Internal Floating Piston- Separates the oil and nitrogen to prevent shock fade
- Fully rebuildable and revalveable
- Linear Valving
- Hardened Chrome Piston shaft- resists rock damage and corrosion
- Precision Japanese CNC machined, High Flow Piston
- Heavy Duty Ultra Low Friction Japanese 3 Stage Seal System
- High Quality German Oil
- Heavy Duty Lower Leg
- Hardened Rubber Lower Bushing provides a long and quiet life
- Heavy Duty 1/8″ (3mm) DOM wall thickness
- 2 Year Warranty
- 385mm Compressed, 610mm Extended
- SOLD IN PAIRS – Includes new washers and bushings for the top, and lower bushings are pressed in
(10 reviews) -
Suspension
Spindle Gussets | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- The factory Toyota spindles commonly bend during extreme off-road use
- Our spindle gussets solve this issue by reinforcing the problematic areas
- The preformed gussets simply weld to the factory forged spindles, dramatically increasing the strength
- This product is designed to allow for maximum wheel backspacing and eliminates the use of the factory sway bar
- Check out this in depth review on the product: [Trail Tacoma]
- Welding Required
- Factory sway bar will not be reused
- Made in the USA
(0 reviews) -
Bump Stops + Spacers
Apache Offroad Rear Upper Coil Isolators Pair | 4Runner FJ Cruiser GX470 GX460
- Pair of aftermarket upper rubber coil isolators for Toyota and Lexus SUV’s
- These sit on top of the rear coil springs to properly isolate them from the frame, and also add the internal bump stop that these vehicles are intended to have
- If you have had an airbag conversion done incorrectly, or if you had to modify your isolators to add air bags and now need to go back, these are what you need
- Sits on top of rear coils
- Aftermarket version of the OEM Toyota Part Number 48302-35050
- OE quality upper rubber coil isolators with built-in bump stops
- Sold as a pair, 1 per vehicle needed
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(10 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.5 DCA Remote Resi Shocks | 4Runner FJ GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Suits up to 1.5″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- What’s Included:
- 2.5 DCA shocks with remote reservoirs Pair
- Shock shaft boots
- Reservoir mounts
- All necessary mounting hardware
- Installation instructions
- Installation video is down below
(4 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1-inch balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 35 spline 300M, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
(9 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesIcon Billet UCA DJ Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- ICON Delta Joint
- CNC Machined 6061 Billet Aluminum Construction
- Quality PTFE-lined ¾” FK Rod Ends
- On-Vehicle Adjustable For Quick And Precise Alignment
- Caster and Camber Adjustability Allows For Fine Tuning Of Vehicle Handling
- Matte Anodized Finish Provides Exceptional Corrosion Resistance
- O-ring Sealed Delta Joint Cover Cap For Additional Protection From The Elements
- Installation Guide
- Warranty Info
(7 reviews) -
Sliders Skids + Steps - FJ Cruiser EarlyFREE SHIPPING
within 48 US StatesApex 2006-2014 Toyota FJ Cruiser Rock Sliders
- Suits 2006-2014 Toyota FJ Cruiser
- All Pro Offroad APEX FJ Cruiser Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- EASY BOLT ON APPLICATION
- CLASS 10.9 HARDWARE INCLUDED
- They are built from heavy-duty .120″ wall tubing
- The shape of our FJ Cruiser Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the FJ Cruiser Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock FJ Cruiser Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
(3 reviews) -
Accessories
RCI Gas Tank Skid Plate | Toyota FJ Cruiser
- Fits all years of Toyota FJ Cruiser
- Black powder coated for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surfaces that easily slides over obstacles
- Works with factory fuel tank only
- Material: 10 Gauge Steel
- Weight: 30lbs
- Finish: Heavy Duty Black Powder Coat
- Made in the USA
(3 reviews) -
4Runner 4th Gen (2003-2009)
OME 2895E Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2895E
- Bar Size : 17 mm
- Free Height : 375mm
- Number of Turns : 6.75
- Coil Weight (each): 5.4 Kg | 11.9 lbs
- Spring Rate : 260 lbs
- Sold in Pairs
(9 reviews) -
4Runner 4th Gen (2003-2009)
OME 2884 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2884
- Bar Size : 16.5mm
- Free Height : 390mm
- Number of Turns : 9.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
- These are comparable to Dobinsons C59-300 coils
(13 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD121 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.73-
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.73 And Down Factory Gears
- Usually all models that came with a manual transmission used 3.73- factory gear ratios, but you must check before ordering
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are re-gearing, check with the gear manufacturer for which Air Locker to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews)
