Your cart is currently empty!
200 Series Land Cruiser (2008-2021)
Showing 61–69 of 69 resultsSorted by popularity
-
Performance Upgrades - 200 SeriesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Land Cruiser 200 Series Big Brake Kit for 2016-2021
2016-2021 Toyota 200 Series Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 14.6″ x 1.34″ 56-vane discs
- 56 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits 2016-2021 models with M14 caliper mounting bracket bolts
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also
(4 reviews) -
Performance Upgrades - 200 SeriesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Land Cruiser 200 Series Big Brake Kit for 2008-2015
2008-2015 Toyota 200 Series Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 14.6″ x 1.34″ 56-vane discs
- 56 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits 2008-2015 models with M12 caliper mounting bracket bolts
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also
(5 reviews) -
Control Arms - 200 SeriesFREE SHIPPING
within 48 US StatesOME Upper Control Arms Pair – 200 Series Land Cruiser
- Suits Land Cruiser 200 Series and Lexus LX570 2008-2021
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joints
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- 3 Year Manufacturers Warranty
- Made in Vietnam
(13 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons Tubular UCA Pair | 200 Series and LX570 – No Ball Joints
- Includes left and right hand side arms, OE style rubber frame bushings installed, and washers
- This does not include any ball joints. Use OEM or aftermarket OE size upper ball joints
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Product Video
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
(12 reviews) -
Performance Upgrades - 200 SeriesFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | 200 Series 16-21 Front
- Suits Toyota Land Cruiser 200 Series 2016-2021 Front and Lexus LX570 2016-2021 Front
- Also offered for the REAR
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(4 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons Full Length Roof Rack for Land Cruiser 200 Series
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008 to 2021
- Includes 200 Series specific mounting rails for installation
- Photo shows gutter mounts still attached to the rack, but they are not used on the 200 Series
- Will cover roof rack, but it will still open
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes vehicle-specific fitting kit to secure the rack to your roof
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
(0 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD152 Rear Air Locker Toyota 9.5″ 32 Spline
- For Use only with Toyota 9.5″ 12 Bolt 32 spline Rear Axle
- Suits multiple vehicles, the full list is down below
- Will not suit 5.7L Tundra engines, as they use a larger rear differential (RD146)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(16 reviews) -
Armor
Dobinsons Front Deluxe Winch Bumper | Toyota Land Cruiser 200 Series 10/2015+
- Suits 10/2015-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(6 reviews) -
Armor
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2012 to mid 2016
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your local paint shop
- Suits 10000 – 12000 LB Low Mount Winches
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(6 reviews)
