Your cart is currently empty!
40 Series Land Cruiser Late (1980-1984)
Showing all 25 resultsSorted by popularity
-
40 Series Land Cruiser Late (1980-1984)Dobinsons Greasable Land Cruiser Shackles Pair for Front or Rear 40 60 70 Series
- Pair of left and right greasable shackles to suit a range of Toyota Land Cruiser models (See list below)
- Recessed twin hole greasable design, anti-reverse built in to stop the leaf spring from bending backwards
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles. Side-specific, includes one left and one right (2 shackles)
- Incredibly tough and durable gold zinc plating
(5 reviews) -
60 62 Series Land Cruiser (1980-1989)Dobinsons PB59-1019K Polyurethane Leaf Spring Bush Kit for Toyota
- Suits 40/45 Series and 60 Series Land Cruisers with 35mm spring eyes front and rear, and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999 and FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
(6 reviews) -
Dobinsons
Dobinsons Greasable Pin Kit (Pair) for Toyota Land Cruiser 40 60 70 Series Models (SP59-007)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- See list of suitable vehicles down below
(4 reviews) -
Dobinsons
Dobinsons UB59-453-3K U-Bolt Set (1 Pair)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 2 U-bolts, enough for 1 leaf spring
- Requires 2″ lift leaf springs to ensure proper fitment
- See below for vehicle fitment list
- Photo for illustration purposes only. These u-bolts are round at the top
- SOLD in pairs because some Toyotas need 3 per vehicle, some need 2
(5 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50649 2.2″ IFP Rear Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
- Should be run with a suspension lift of 1.75″ or more
(15 reviews) -
Suspension
Dobinsons GS59-649 Rear Twin Tube Shocks Pair – Comfort Option
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- GS59-649 is a comfort version (softer) of the GS59-651
- See full vehicle list below for fitment
- 591mm extended, 363mm compressed, 51mm body diameter
(9 reviews) -
Replacement Bushings
Dobinsons Lower Shock Bushings (2 Halves) for -682 -687 -685 -649 -651 -637
- Dobinsons replacement rear lower shock bushing – 2 half bushings for 1 shock
- Suits a variety of Dobinsons shocks, part numbers ending in -682 -687 -685 -649 -651 -637
- Full list of part numbers this fits is below
- This is for a single bushing set only for 1 shock
- 2 half bushings, they go in from either side of the lower eyelet to form a complete bushing
- High quality natural rubber bushing
(0 reviews) -
Dobinsons
Dobinsons SP59-006 Greasable Pin Kit (Pair) Land Cruiser 40/45 Series to 1979
- Suits 25mm leaf springs in front and rear of FJ40, BJ40 and the front of FJ45, BJ45 with 25mm spring eyes and 15mm bolts
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- Photo for reference only, actual product may appear different
(3 reviews) -
40 Series Land Cruiser Late (1980-1984)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50635 2.2″ IFP Shocks Pair FJ40 BJ40 FJ45
- Suits the front end of all FJ40 Land Cruisers and all FJ45/47 front ends (25mm and 35mm spring eyes)
- Suits the rear end of early model FJ40’s up to 01/1975
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(16 reviews) -
Dobinsons
Dobinsons SD59-823 Big Bore Steering Damper | Land Cruiser 40 45 46 47 55 series
- Suits Toyota Landcruiser 40 45 46 47 and 55 series (all years and variants of these models)
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A649 3-Way Adjustable Rear Shocks Pair for Toyota
- Suits various vehicles, list is down below
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- 626mm extended, 400mm compressed
- 22mm / 7/8″ shaft diameter
- Full 2 year limited warranty, no set rebuild time period
- Should be run with a suspension lift of 1.75″ or more
(15 reviews) -
Suspension
Dobinsons GS59-651 Rear Twin Tube Shocks Pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- See list of suitable vehicles down below
- 591mm extended, 363mm compressed
- 60mm diameter outer tube size
(10 reviews) -
Dobinsons
Dobinsons Single Caster Wedge 70MM Wide – 3 Degrees
- 3 Degree Caster shim can be used to correct front caster / pinion angle or rear pinion angle on a 70mm wide leaf spring
- Sold individually
- Suits the following Dobinsons leaf spring part numbers:
- BJ42-7L-F
- HJ40-7L-F
- HJ45-6+3-R
- HJ45-7+3-R
- HJ45-7L-F
- HJ45-8L-F
- HJ47-6+3-R
- HJ47-7+3-R
- HJ47-7L-F
- HJ47-8L-F
- HJ60-5L-F
- HJ60-6L-F
- HJ60-7L-F
- HJ60-7L-R
- HJ60-8L-R
- HJ61-7L-F
- HJ61-7L-R
- HJ61-8L-R
- HJ75-6+2-R
- HJ75-7+2-R
- HJ75-8+2-R
- HJ75-7L-F
- HJ75-8L-F
- HZJ75-6+2-R
- HZJ75-7+2-R
- HZJ75-8+2-R
- HZJ75-7L-F
- HZJ75-8L-F
- L43-014-R
- L43-015-R
- L43-016-R
- L45-061-R
- L59-020-R
- L59-021-R
- L59-022-R
- L59-071-R
- L59-074-R
- L63-033-R
- L63-035-R
- L63-037-R
- PAJ-3+1-R
- PAJ-4+1-R
- TOY-029-R
- TOY-034-R
- TOY-035-R
- TOY-036-R
- TOY-037-F
- TOY-041-R
- TOY-055-F
- TOY-056-R
- TOY-067-F
- TOY-068-R
- TOY-078-R
- TOY-082-R
- TOY-083-R
- TOY-084-R
- TOY-085-R
- TOY-088-R
- TOY-101-F
- TRIT-003-R
- TRIT-3+2-R
- Y60-5+2-R
- Y60-6+2-R
- Y60-7+2-R
- Y60-7L-F
- Y60-8L-F
(0 reviews) -
Sale!15% off Year End SaleDifferential | Drivetrain
Ultimate Toyota Knuckle Rebuild Kit
- Suits TOYOTA PICKUP (1979-1985), TOYOTA 4RUNNER (1985), TOYOTA LAND CRUISER FJ40 (1979-1983), TOYOTA LAND CRUISER FJ50 (1979-1980), TOYOTA LAND CRUISER FJ60 (1980-1990), TOYOTA LAND CRUISER FJ70 – Models with 4-stud knuckles only (1984-CURRENT)
- The Ultimate Toyota Knuckle Rebuild Kit includes gaskets, upgraded seals, high-quality bearings and more. We’ve even included the specialty tools needed to complete the job. Simply put, this is the best, most complete knuckle rebuild kit available!
- Includes:
- (1) 54mm Spindle Socket
- (1) Knuckle Pull Scale
- (1) Upgraded HD Inner Axle Seals
- (2) Koyo* Front Wheel Bearing Kits (Includes 2 Inner and 2 Outer Bearings and 2 Spindle Seals)
- (1) Trail-Safe Wiper Seals with Rock Rings and Extended Hardware
- (2) Brass Spindle Bushings
- (2) Wheel Bearing Nut Kits
- (1) Spindle Stud Kit
- (4) Koyo** Trunnion Bearings
- (1) Trunnion Bearing Shim Pack
- (2) Inner Steel Rings that go behind the Wiper Seals
- (2) Inner Spindle Gaskets
- (2) Outer Spindle Gaskets
- (2) Hub Inner Gaskets
- (2) Hub Outer Gaskets
- (2) Hub Dial O-Rings for Aisin Hubs
- (1) Toyota Ultimate Backing Plate Eliminator Kit
- * Some kits may contain Timken bearing kits when Koyo bearings are not available.
- ** Some kits may contain Schaeffler/FAG trunnion bearings when Koyo bearings are not available.
- Does not fit FJ80 Land Cruiser front axles
(8 reviews) -
Dobinsons
Dobinsons UB59-449K U-Bolt Kit (1 Pair)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 2 U-bolts, enough for 1 leaf spring
- Some vehicles require multiple pairs
- Requires 2″ lift leaf springs to ensure proper fitment
- See below for vehicle fitment list
- Photo for illustration purposes only. These u-bolts are 1 round and 1 square at the top (1 of each)
(9 reviews) -
Suspension
Dobinsons GS59-635 Twin Tube Shocks Pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- See full vehicle list below for fitment
- 488mm extended, 308mm compressed
- 50mm diameter tube
(10 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons TOY-035-R Rear Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Stock weight
- Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
- Gives 45-50mm lift with stock rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
(2 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons BJ42-7L-F Front Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Stock weight
- Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
- Gives 45mm with stock front end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
(3 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons FJ40 2.0″ IMS Suspension Kit for Toyota Land Cruiser 1980-1984
- For 1980+ Model FJ40’s with 35mm spring eye size front and rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Fully rebuildable and re-valvable IMS shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons FJ40 Full 2.0″ Suspension Kit for Land Cruiser FJ40 BJ40 1980-1984
- For 1980+ Model FJ40’s with 35mm spring eye size front and rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
(10 reviews) -
Suspension
OMESD23 Steering Damper | Land Cruiser 40 45 46 47 55 series
- Suits Toyota Landcruiser 40 45 46 47 and 55 series (all years and variants of these models)
- Nine Stage Coil Spring Valving For Optimum Performance
- A 15mm Piston Rod Provides Improved Strength
- Stone Guard Protects Piston Rod Against Stone Damage
- A 35mm Piston And Bore Allows Increased Oil Volume
- Twin Tube Design Protects Internal Components Against Stone Damage
- Multi-Lip Seal Prevents Oil Loss
- Original Stabilizer Mounts May Be Used Where Appropriate
- Photo for illustration purposes
(15 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD153 Rear Air Locker Toyota 12 Bolt Semi Float
- For Use With Toyota 12 Bolt Semi Float 30 Spline solid axle – used for many years in some rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75 Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD142 Air Locker Toyota 12 Bolt Full Float
- For Use With Toyota 12 Bolt Full Float 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75 Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons TOY-036-R Rear Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Heavy Load
- Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
- Gives 45-50mm lift with 300LBS+ of constant rear weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
(2 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons HJ47-7L-F Front Leaf Springs Pair for 1980+ FJ40 BJ40 35mm eyes
- Suits 1980+ Toyota Land Cruiser FJ40 BJ40 FJ45 HJ47 BJ45 BJ46 models with 35mm eyes
- Gives 45mm lift with 300LBS+ constant front end weight on a FJ40 and BJ40
- Gives 45mm lift stock weight on a FJ45 HJ47 BJ45 BJ46
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
(6 reviews)
