70 Series Land Cruiser (all variants)

Showing 31–60 of 63 results

70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 - 87-96
Dobinsons Full Length Roof Rack for Land Cruiser 76 and 78 Series including LJ78 and KZJ78
- Suits Toyota Land Cruiser 76 and 78 Series including LJ78 and KZJ78 with Gutter Rails on the roof line
- Will not suit high-roof models or PRP fiberglass tops
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes gutter mount fitting kit to secure the rack to your factory gutter rails
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
$1,205.00 Select options
Dobinsons
Ships FREE !!
within 48 US States
Dobinsons IMS59-60634 Monotube IFP Front Shocks LJ70 LJ72 LJ73 LJ77 LJ78 LJ79 KZJ78
- Front IMS shocks for Toyota Land Cruiser LJ70 LJ72 LJ73 LJ77 LJ78 LJ79 KZJ78 – 1987 to 1996 (import Prado’s with rectangle headlights)
- Longer travel than regular replacement rear shocks
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 510mm extended, 336mm compressed
$650.00 Add to cart
Suspension
Dobinsons GS59-634 Front Twin Tube Long Travel Shocks | 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights, and 1994+ RJ70, RJ73, KZJ70, KZJ71, KZJ73 with Square Headlights, and LJ78, LJ79, RJ77, KZJ78
- For 2.5″ of lift only
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
$310.00 Add to cart
Snorkel
Ships FREE !!
within 48 US States
Dobinsons Snorkel Kit for Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985 to 2007 4.2L Diesel
- Suits 4.2L Diesel Toyota Landcruiser 70 71 73 74 75 78 79 Series 1985-2007
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
$355.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons 1.75″ to 2.5″ Lift Kit for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
- Call or email to check stock before ordering. Live stock is not updated for this product on the website
$1,160.00 Select options
Armor
Dobinsons 70 Series Winch Bumper | Land Cruiser 70 Series 1985-2007
- See below for full vehicle compatibility list
- Winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop
- Suits 10000-12000 LB Low Mount Winches
- Note: LJ versions of the 70 series (LJ71, LJ73, etc.) may have different bolt patterns in the frame horn ends, so drilling and adapting to the holes of the bumper may be required
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
From $1,765.00 Select options
70/73 Series - HZJ70, HZJ73, PZJ70, PZJ73 - 1990-1999
Dobinsons 2.0″ Suspension Kit Toyota Land Cruiser 70 Series – HZJ70 HZJ73 PZJ70 PZJ73
- Full 2.0″ Suspension Kit Replacement for Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Select medium or heavy load leaf spring options
- Now with option to run new Dobinsons IMS shocks as an upgrade
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
From $2,220.00 Select options
Roof Racks
Dobinsons Full Length Roof Rack for Land Cruiser 60 and 80 Series
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes gutter mount fitting kit to secure the rack to your factory gutter rails
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
$1,205.00 Select options
Full Suspension Kits - FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
Dobinsons 2.0″ IMS Suspension Kit Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Full 2″ IMS Suspension Kit Replacement for Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Select medium or heavy load leaf spring options
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
From $2,895.00 Select options
Full Suspension Kits - FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
Dobinsons 2.0″ Suspension Kit Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Full 2.0″ Suspension Kit Replacement for Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Select medium or heavy load leaf spring options
- Now with option to run new Dobinsons IMS shocks as an upgrade
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
From $2,220.00 Select options
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Ships FREE !!
within 48 US States
Dobinsons 2.5″ IMS Lift Kit Toyota Land Cruiser 1/90-5/93 LJ70/72/73/77 | 1994+ RJ70/73 KZJ 70/71/73/78
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement shocks for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Shocks are Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and IMS shocks. Add other parts below
From $2,160.00 Select options
Suspension
Dobinsons GS59-633 Rear Twin Tube Long Travel Shocks | 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights, and 1994+ RJ70, RJ73, KZJ70, KZJ71, KZJ73 with Square Headlights, and LJ78, LJ79, RJ77, KZJ78
- For 2.5″ of lift only
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
$310.00 Add to cart
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons 1.75″-2.5″ Lift Kit for Toyota Land Cruiser LJ70 LJ72 LJ73 LJ77 1/90-5/93 w/Square Headlights
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
From $1,160.00 Select options
Rear Bumpers
Dobinsons Toyota 70 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 and 78 Series Land Cruiser Wagons
- Will not suit any Prado variant 70x series without modifications
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- ***Does not include Hi-Lift Jack carrier as shown in photos***
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$2,860.00 Select options
Snorkel
Ships FREE !!
within 48 US States
Dobinsons 4×4 Snorkel Kit | Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985-07 3.4L/4.0L
- Dobinsons SN59-3374 Suits 4.0L Diesel, 4.0L Petrol, 3.4L Diesel
- 1985 to 2007 (Narrow Front) 70 Series Toyota Land Cruisers, including the 70, 71, 73, 74, 75, 78, and 79 Series variant
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
$355.00 Add to cart
Sale!
New Item
Roof Racks
RCI is on Sale For Spring!!
RCI Low-Pro Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
Original price was: $375.00.Current price is: $337.50. Select options
On Backorder
Excluded
Dobinsons HZJ75-8L-F Front Heavy Load Leaf Springs Pair
- Front Heavy Load Leaf Springs for the Toyota – FZJ77, HZJ77, PZJ77 from 1993-1999, 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999, 75 Series – FZJ75, HZJ75 1990-1999
- 45mm front lift with 110-220LBS constant front end weight (bumper, winch, etc)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
$480.00 Add to cart
Dobinsons
Dobinsons Big Bore 2007+ Land Cruiser Steering Damper SD59-825
- Suits Land Cruisers, Series 71. 76. 78 and 79 series from 2007 onwards
- These are solid-front axle Land Cruisers that are not sold in the USA
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- Specifications: 750mm extended, 510mm compressed, ball joints at both ends
- Photos are for illustration purposes only
$135.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS51-60116 Front IMS Shocks
- For a 3″ front lift on Nissan GQ/GU Patrol and Toyota 78 or 79 Series Land Cruiser
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS45-60915 Rear IMS Shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS45-60914 Front IMS Shocks
- For a 4″ front lift on Nissan GQ/GU Patrol and Toyota 78 or 79 Series Land Cruiser
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS45-60913 Rear IMS Shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS45-60115 Rear IMS Shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS45-60114 Front IMS Shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart
Differential | Drivetrain
Ultimate Toyota Knuckle Rebuild Kit
- Suits TOYOTA PICKUP (1979-1985), TOYOTA 4RUNNER (1985), TOYOTA LAND CRUISER FJ40 (1979-1983), TOYOTA LAND CRUISER FJ50 (1979-1980), TOYOTA LAND CRUISER FJ60 (1980-1990), TOYOTA LAND CRUISER FJ70 – Models with 4-stud knuckles only (1984-CURRENT)
- The Ultimate Toyota Knuckle Rebuild Kit includes gaskets, upgraded seals, high-quality bearings and more. We’ve even included the specialty tools needed to complete the job. Simply put, this is the best, most complete knuckle rebuild kit available!
- Includes:
  
  (1) 54mm Spindle Socket
  
  (1) Knuckle Pull Scale
  
  (1) Upgraded HD Inner Axle Seals
  
  (2) Koyo* Front Wheel Bearing Kits (Includes 2 Inner and 2 Outer Bearings and 2 Spindle Seals)
  
  (1) Trail-Safe Wiper Seals with Rock Rings and Extended Hardware
  
  (2) Brass Spindle Bushings
  
  (2) Wheel Bearing Nut Kits
  
  (1) Spindle Stud Kit
  
  (4) Koyo** Trunnion Bearings
  
  (1) Trunnion Bearing Shim Pack
  
  (2) Inner Steel Rings that go behind the Wiper Seals
  
  (2) Inner Spindle Gaskets
  
  (2) Outer Spindle Gaskets
  
  (2) Hub Inner Gaskets
  
  (2) Hub Outer Gaskets
  
  (2) Hub Dial O-Rings for Aisin Hubs
  
  (1) Toyota Ultimate Backing Plate Eliminator Kit
  
  * Some kits may contain Timken bearing kits when Koyo bearings are not available.
  
  ** Some kits may contain Schaeffler/FAG trunnion bearings when Koyo bearings are not available.
- Does not fit FJ80 Land Cruiser front axles
$460.00 Add to cart
76 Series - FZJ76, HZJ76, VDJ76 - 2007+ (Station Wagon)
Dobinsons Toyota 76 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 Series Land Cruiser Wagons, FZJ76, HZJ76, VDJ76
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$2,860.00 Select options
79 Series - FZJ79, HZJ79, HDJ79, VDJ79, GRJ79 (Pickup)
Dobinsons Toyota 79 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 79 Series Land Cruiser Pickup Trucks, FZJ79, HZJ79, HDJ79, VDJ79,
  GRJ79
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$2,860.00 Select options
Full Suspension Kits - FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
Ships FREE !!
within 48 US States
Dobinsons 2.0″ MRA Suspension Kit Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Full 2″ MRA Suspension Kit Replacement for Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Select medium or heavy load leaf spring options
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
From $4,035.00 Select options
FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
Dobinsons HJ61-8L-R Rear Super Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with SUPER HEAVY rear end weight of 660LBS+
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
$570.00 Add to cart
Dobinsons
Dobinsons HJ61-7L-R Rear Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989
- 50mm rear lift with 330LBS of additional constant weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
$430.00 Add to cart