Your cart is currently empty!
Toyota
Showing 181–210 of 1150 resultsSorted by popularity
-
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4108 Coil-Rite Rear Helper Airbags for 2-3″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Substitute Option – Air Lift 60769
- These are longer than the Firestone 4135 for lifted vehicles
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Bump Stops & Spacers
Wheeler’s Rear Superbumps for 03-24 4Runner FJ Cruiser GX470 GX460
- Suits the following vehicles: 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60711 2.6″ IFP Rear Shocks Pair | Toyota Tundra 2007-2021
- Suits 2007-2021 Toyota Tundra, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 642mm extended, 401mm compressed lengths
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
(17 reviews) -
4Runner 3rd Gen (1996-2002)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50225 Rear 2.2″ IFP Shocks Pair | Toyota 4Runner 1990-02
- Suits Rear Toyota 4Runner 1990-2002 models
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 530mm extended, 344mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
(18 reviews) -
ARB
OME Tacoma Leaf Spring Bushing Kit | 2005-2023 Tacoma
- 1 kit fits both ends of ONE leaf spring (the fixed end and the shackle end)
- Each kit comes with 4 identical poly half bushings and 2 sleeves
- Order 2 kits to replace the bushings in 4 locations of 2 leaf springs
- Order 3 kits if you want to replace all 6 bushing locations related to the leaf springs
- Polyurethane bushings with steel sleeves
(7 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Rear 15mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 100 105
- Suits Land Cruiser 80 Series, 100 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-146VT Dual Rate Front 2.5″ Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 2.5″ with 200LBS front end constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
(12 reviews) -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(7 reviews) -
Full Suspension Kits - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesDobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for Toyota 4Runner 5th Gen
- Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(5 reviews) -
GX470 (2002-2009)FREE SHIPPING
within 48 US StatesDobinsons 1″ to 3.5″ IMS Lift Kit for Lexus GX470
- Full Dobinsons IMS Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Standard Coil Springs
- Select the struts and shocks you want as well as all possible add-ons down below
- See note below in description about KDSS models
(23 reviews) -
SPCFREE SHIPPING
within 48 US StatesSPC 25490 | UCA’s for 2008-22 Sequoia & 2007-21 Tundra Pair
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with new updated design maintenance-free ball joints
- Installation Instructions
- We offer replacement ball joints as well
(13 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60782 Front 2.6″ IFP Shocks Pair | Land Cruiser 100 Series (0-2″ lift)
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 Front End
- Front shocks only. To order full kit, click here
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(13 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Rubber Bushings, Radius Arm to Chassis (Fixed End) for Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- For any lift height, or no lift. These are OE replacement bushings.
- High quality rubber, producing the highest ride quality
- Pressing of bushings is required during installation
- Replaces OE bushings holding front radius arms to the frame
(0 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons 1.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ (0-110LBS) – Pair
- Suits Toyota Tundra 2022+, lifts the rear 1.0″ with 0-110LBS of rear weight
- Variable rate springs for the best ride quality
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Stock base model shocks are ok with 1″ lift but they’re not very long. TRD Pro rear shocks are ok for up to 2″ of lift
- Click here to see shock options
(7 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Long Range Tanks
Toyota Tacoma Long Range Replacement Fuel Tank 2005-2023 (33gal)
- Suits Toyota Tacoma 2005-2023 4×4 Short and Long Bed models (requires additional parts from below for some variants) (WILL NOT SUIT 2018+ ACCESS CAB LONG BED MODELS!!)
- This is a replacement tank that replaces your OE fuel tank, it holds 33 gallons instead of the stock 21 gallons and fills the same way an OE tank fills
- 33 gallon capacity, replaces the original tank
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 5 hours by a professional
- Weight of tank without fuel is 90 LBS
- The fuel gauge will remain accurate, DTE will not. Once the E-light comes on there is 7 gallons remaining
- Part Number TTACDCR
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California due to SMOG rules. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(15 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-185 Rear Coil Springs | Land Cruiser – Pair
- 80 Series and Lexus LX450 (1990-1997) – Dobinsons c59-185 – 3″ lift with up to 220lbs weight
- 100 Series (1998-2007) – Dobinsons C59-185 – 1.5″ lift, linear rate, with 440LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 480/490mm free height, 19mm wire, 277LB rate
- Sold in Pairs
(16 reviews) -
4Runner 3rd Gen (1996-2002)
Dobinsons GS59-225 Rear Shocks Pair | 4Runner 2nd & 3rd Gen 1990-2002
- Suits 2nd Gen 4Runner 1990-1995 (with coil spring rear end), and 3rd Gen 4Runner 1996-2002 (with coil spring rear end)
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-225 Specifications: 530mm extended, 330mm compressed, 60mm body size
- Sold in Pairs
(6 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-144VT Dual Rate 3.5″ Front Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 3.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
(13 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons 100 Series Lift Kit | Toyota Land Cruiser IFS V8 Gas 1998-2007 (all options)
- Build a full suspension replacement here for your Toyota Land Cruiser 100 Series, with all possible options listed on this one page
- Lexus LX470 and Land Cruiser 100 Series share the same suspension parts – 1998-2007
- By default, no rear coils are included, but you can easily select and add them
- You can also remove the torsion bars if you don’t want those
- Build a Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A base kit includes 2 Front Shocks, 2 Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs
- You can choose from twin tube, IMS Monotube or MRA 3-Way Adjustable Monotube shocks in the drop down menus
- If you have a diesel engine, you need to use this other kit page instead
(12 reviews) -
Coil Springs - 4th Gen 4Runner
Dobinsons Rear Coil Spring Options for Toyota 4th Gen 4Runner 2003-2009 – Pair
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 3/4-1″ with stock weight
- C59-505 – 1.25-1.5″ with stock weight
- C59-325 – 1.75-2″ with stock weight
- C59-327 – 2″ with 200-400lbs weight
- C59-329 – 2″ with 500-800lbs weight
- C59-331 – 2″ with 800-1200lbs weight (TEAL ONLY)
- C59-675V – 2.5″ long travel, stock weight
- C59-677V – 3″ long travel with stock weight, 2.5″ with 200-400lbs weight
- C59-701V – 3″ long travel, 300-600lbs weight
- C59-749V – 3″ long travel, 800-1000LBS super extra heavy
- C59-849V – 3″ long travel, 1000LBS+ constant rear load (TEAL ONLY)
- Coil specs are down below
(19 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons 2.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ – Pair
- Suits Toyota Tundra 2022+, lifts the rear 2.0″ with stock weight (no accessories)
- Variable Rate springs for the best ride quality unloaded or loaded
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
- Stock base model shocks are ok with 1″ lift but they’re not very long. TRD Pro rear shocks are ok for up to 2″ of lift
(7 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 2nd Gen (2007-2021)
Dobinsons L59-120-R Rear Leaf Springs Pair for Toyota Tundra 07-21
- L59-120-R – 4 + 2 Leaves (6 leaf pack) Raised Height (55mm, 2.25″ Lift) Heavy Duty for stock to medium loads
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
- Note: Greasable bush kits (PB59-1102K), greasable pins (SP59-060), and u-bolts (UB59-437K) are available separately. These do not come with bushings. See links below
- If you carry more than 200-300LBS of constant rear weight and want to maintain more height and load support, you can add-a-leaf to each pack for increased load support and to maintain lift height – CLICK HERE
(5 reviews) -
Coil Springs
Dobinsons C59-720 2.5″ Front Coils for Toyota Sequoia 2008-2022 – Pair Teal
- Suits Toyota Sequoia 2008-2022 5.7L V8 4×4 models
- Does not suit factory air suspension models
- C59-720 Front 2.5″ Lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(17 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-612V 3″ Flexi Front Coil Springs | Land Cruiser 80 series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- 3″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 540/550mm free height, 17mm wire, 180-275LBF/in variable rate
- Sold in Pairs
(16 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-559V 1.5-2″ Land Cruiser 200 Series Rear Coils – Pair
- C59-559V – 1.5-2.0″ Lift Variable Rate – great for towing – lift height depends on rear vehicle weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 440/470 mm free height and 19mm wire diameter
- Sold as a Pair
(16 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 2nd Gen (2007-2021)
RCI Full Skid Plate Set | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front, transmission/transfer-case skid plates
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
(9 reviews) -
Sale!4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDirt King Tubular Ball Joint UCA’s Pair – FJ Cruiser 4Runner GX470 GX460
- Suits 4th and 5th Gen Toyota 4Runner from 2003 to 2024 2WD and 4WD, Toyota FJ Cruiser all years, Lexus GX470 and GX460 all years
- CAD designed
- Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Preassembled with heavy duty Moog ball joints for fast installation
- Probearing Pro 2 Series bushings (new for 2024)
- Maintenance Free Bushings
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Powder coated black
- Includes Ball Joint Caps
- Installation Instructions
- Proudly made in the USA
(4 reviews) -
Rear Drawers
Dobinsons 100 Series Drawers for Toyota Land Cruiser 1998-2007
- The best rattle-free drawer system on the market for 100 Series Land Cruisers and Lexus LX470 Wagons!!
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Aluminum Edging Protection, Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(12 reviews) -
Sale!15% off Year End SaleAll Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | 03-09 4Runner FJ Cruiser GX470
- Complete CV boot replacement kit – Suits 2003-2009 4Runner, 2006-2009 FJ Cruiser, 2003-2009 Lexus GX470
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(18 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50941 Long Travel Rear 2.2″ IFP Shocks Pair for 2005-23 Tacoma
- Suits Toyota Tacoma 2005-2023 2nd and 3rd Gen 4×4 and Prerunner models
- Longer travel rear shocks for maximum down travel with a bolt-on shock
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Specifications 16.5″ compressed length, 26.9″ extended length
- These shocks require extended brake lines and extended bump stops
- Full 2 year limited warranty, no set rebuild time period
(18 reviews)
