Your cart is currently empty!
Toyota
Showing 151–180 of 972 results
-
ARBOME Tacoma Leaf Spring Bushing Kit | 2005+ Tacoma
- 1 kit fits both ends of ONE leaf spring (the fixed end and the shackle end)
- Each kit comes with 4 identical poly half bushings and 2 sleeves
- Order 2 kits to replace the bushings in 4 locations of 2 leaf springs
- Order 3 kits if you want to replace all 6 bushing locations related to the leaf springs
- Polyurethane bushings with steel sleeves
$39.00 Add to cart -
Sequoia 1st Gen (2001-2007)Dobinsons C59-345 Rear Coils for Toyota Sequoia 2001 to 2007 4.7L V8
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- 425/425mm free height, 212LB/IN spring rate
- Each pair of coils lift 1.75″ over stock height
$270.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons GS59-687 4-5″ Rear Shocks for 80 Series
- Sold as a Pair, suits lifts of 4-5″ or for Long Travel setups – 1990-1997 Toyota Landcruiser 80 Series
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-687 Specifications: 680mm extended, 407mm compressed, 60mm body size
$350.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons 20mm Coil Spacer (Single) for Front of Toyota Land Cruiser 80 105
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
$45.00 Add to cart -
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
From $930.00 Select options -
80 Series Land Cruiser (1990-1997)Ships FREE !!
within 48 US StatesTimbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
$269.36 Add to cart -
Suspension
Dobinsons GS59-711 Pair of Rear Shocks for Toyota Tundra 2007-2021
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-711 Specifications are 622mm extended, 380mm compressed, 54mm body size
$310.00 Add to cart -
Sequoia 2nd Gen (2008-2022)
Dobinsons Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8 (All Options)
- Suits 2008-2022 Toyota Sequoia 4×4 V8 models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Twin Tube or IMS Monotube struts and shocks (more details below in description)
- Does not suit rear air suspension equipped models
- 2.5″ rear lift height requires shock extensions with twin tube shocks for proper travel, add it in the drop-downs below
- Front IMS struts assembly instructions
From $1,470.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-146VT Dual Rate Front 2.5″ Coils | 80 Series 1990-1997
- ifts 2.5″ with 200LBS front end constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
$485.00 Add to cart -
4Runner 3rd Gen (1996-2002)
Dobinsons C59-137V Rear Lifted Coils for Toyota 4Runner 3rd Gen
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Dobinsons C59-137V – 2″ rear lift – variable rate coils
$270.00 Select options -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons DD59-532K Diff Drop Kit | Land Cruiser 100 Series and LX470
- Keeps CV angles at a good working angle
- Suits lift heights of 2.0″ and higher
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Powder coated black main differential cradle
- Use with Dobinsons longer travel front shocks and new UCA’s for maximum front end travel and proper articulation
- INSTALLATION INSTRUCTIONS
$345.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons GS45-912 4-5″ Front Shocks for Toyota 80 series
- Suits: Toyota Land Cruiser 80 series 1990-1997 for 4-5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS45-912 specifications: 670mm extended, 390mm compressed, 60mm body size
$350.00 Add to cart -
Bump Stops
Wheeler’s Rear Superbumps for 03-24 4Runner FJ Cruiser GX470 GX460
- Suits the following vehicles: 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
$221.00 Add to cart -
4Runner 3rd Gen (1996-2002)
Dobinsons C59-131 Rear Lifted Coils for Toyota 4Runner 3rd Gen
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- C59-131 – 2″ lift linear rate coils
$270.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-145VT Dual Rate Rear 3.5″ Coils | 80 Series 1990-1997
- Lifts 3.5″ with full rear bumper, tire carrier, roof rack, drawers, 2nd tank, etc. Lifts more without as much weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
$485.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Complete CV Boot Kit | Long Travel for 2005-23 Tacoma
- Complete CV boot replacement kit – Suits 2005-2023 Toyota Tacoma
- Includes inner OEM-Style CV boots and outer LONG TRAVEL CV boots and all related clamps
- Does not require long travel suspension to run this kit
- Qty 2 – OEM-Style Neoprene Long Travel Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
$160.00 Add to cart -
Full Suspension Kits - 5th Gen 4Runner
Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for Toyota 4Runner 5th Gen
- Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
$1,165.00 Select options -
Firestone
Firestone 4108 Coil-Rite Rear Helper Airbags for 2-3″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
- Substitute Option – Air Lift 60769
- These are longer than the Firestone 4135 for lifted vehicles
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
$144.12 Add to cart -
Long Range Tanks10% Off For Memorial Day!!
Use coupon code MEMORIALDAYETA is July 2024Toyota Tacoma Long Range Replacement Fuel Tank 2005-2023 (33gal)
- Suits Toyota Tacoma 2005-2023 4×4 Short and Long Bed models (requires additional parts from below for some variants) (WILL NOT SUIT 2018+ ACCESS CAB LONG BED MODELS!!)
- This is a replacement tank that replaces your OE fuel tank, it holds 33 gallons instead of the stock 21 gallons and fills the same way an OE tank fills
- 33 gallon capacity, replaces the original tank
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 5 hours by a professional
- Part Number TTACDCR
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California due to SMOG rules. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
$2,245.00 Select options -
Dobinsons
Dobinsons UB59-453-1K U-Bolt Kit (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle (2 pairs)
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for Illustration purposes only. These u-bolts are round at the top
$90.00 Add to cart -
FirestoneShips FREE !!
within 48 US StatesToyota Tundra Firestone Airbag & Daystar Cradle Bundle 2007-21 Tundra
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions: Installation Instructions
- Firestone Airbag Kits do not have a warranty when used with Daystar Airbag Cradle Kit
- Enjoy full suspension travel and the benefits of air bags with the Daystar Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough Daystar polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Your Daystar Air Bag Cradle Kit is backed by a Lifetime Warranty
- Daystar cradle mounts to top of leaf spring, airbag mounts to frame above only
$629.00 Add to cart -
Suspension
Dobinsons GS59-649 Rear Twin Tube Shocks – Comfort Option
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- GS59-649 is a comfort version (softer) of the GS59-651
- See full vehicle list below for fitment
- 591mm extended, 363mm compressed, 51mm body diameter
$310.00 Add to cart -
GX470 (2002-2009)
Dobinsons 1″ to 3.5″ IMS Lift Kit for Lexus GX470
- Full Dobinsons IMS Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Standard Coil Springs
- Select the struts and shocks you want as well as all possible add-ons down below
- See note below in description about KDSS models
From $1,770.00 Select options -
80 Series Land Cruiser (1990-1997)Ships FREE !!
within 48 US StatesDobinsons SS59A824 Adjustable Monotube Steering Damper | Land Cruiser
- 56mm Extruded and CNC machined 6061-T6 hard anodized aluminum body
- Hard-anodized and clear coated for a durable finish.
- External reservoir design separates oil and high-pressure nitrogen gas
- Black-anodized, CNC machined 6061-T6 billet aluminum Components
- 5/8” hard chrome plated heat treated alloy steel Shaft
- 50mm high-flow 6061-T6 CNC machined Piston
- Natural rubber OEM style bushings
- Direct replacement for stock and after-market lifts kits
- 12 stage adjustment range
- Installation Instructions
$545.00 Add to cart -
Sale!Tundra 2nd Gen (2007-2021)On Sale For Memorial Day!!
RCI Full Skid Plate Set | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front, transmission/transfer-case skid plates
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
Original price was: $589.98.$531.00Current price is: $531.00. Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA45-A912 3-Way Adjustable MRA Front Shocks | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 4″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 667mm extended, 401mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-144VT Dual Rate 3.5″ Front Coils | 80 Series 1990-1997
- Lifts 3.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
$485.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-222V Front Coil Springs | Land Cruiser 80 Series 2.0″ Lift Progressive Rate with 110-220LBS Load
- C59-222V are Front Progressive / Variable rate coils to give a 2″ lift with 110-220 LBS of additional accessory weight
- They lift more than 2″ if you don’t have that added weight on them
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$270.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Rubber Bushings, Radius Arm to Chassis (Fixed End) for Land Cruiser 80 Series
- For any lift height, or no lift. These are OE replacement bushings.
- High quality rubber, producing the highest ride quality
- Pressing of bushings is required during installation
- Replaces OE bushings holding front radius arms to the frame
$110.00 Add to cart -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Rear 15mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 100 105
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
$45.00 Add to cart
