Performance Upgrades - Sequoia 1st Gen
Showing all 19 resultsSorted by popularity
-
TimbrenTHIS SHIPS FREE
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2026 Tundra, 2001-2026 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series, Lexus LX470 and LX570, 2024+ Land Cruiser 250 and Lexus GX550
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95, Prado 120 and 150
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
All Pro OffroadTHIS SHIPS FREE
within 48 US StatesAll Pro Complete CV Boot Kit | Toyota Tundra Sequoia 2000-2006
- Complete CV boot replacement kit – Suits 2000-2006 Toyota Tundra and Sequoia
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(17 reviews) -
Bump Stops + SpacersTHIS SHIPS FREE
within 48 US StatesDobinsons Front Adjustable Height Bump Stop Pair | Toyota + Lexus IFS
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, Prado 120/150, GX550, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
Trail-GearTHIS SHIPS FREE
within 48 US StatesTG Diff Drop Kit – Toyota 1995-2004 Tacoma 1996-2002 4Runner 2000-2006 Tundra Sequoia
- Solid aircraft-grade 6061-T6 aluminum spacers
- Zinc-plated Grade 8 hardware
- Aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skid plate down
- Fits the following applications:
- Toyota Tacoma 1995-2004 (4×4)
- Toyota Tundra 2000-2006 (4×4)
- Toyota 4Runner 1996-2002 (4×4)
- Toyota Sequoia 2001-2007 (4×4)
- Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Made in USA
(9 reviews) -
FirestoneTHIS SHIPS FREE
within 48 US StatesFirestone 4124 Coil-Rite Rear Helper Air Springs (Airbags) | 80 100 Series Sequoia
- Firestone 4124 Suits Toyota Landcruiser 80 and 100 Series and Lexus LX450 and LX470, Toyota Sequoia 2001-2007, and 2022-2025+ with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles up to 2.5″ of lift
- Works with 0-2.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Air Spring Diameter: 5.50 inches
- Air Spring Length: 8.00 inches
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Sale!
SPCSPC 25485 | UCA’s for Toyota 2001-07 Sequoia & 1999-06 Tundra Pair CLEARANCE
- Suits 2001-07 Toyota Sequoia & 1999-06 Toyota Tundra
- THIS ITEM IS ON CLEARANCE AND CAN’T BE RETURNED
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
(11 reviews) -
SuspensionAir Lift 60728 Rear Helper Air Springs (Airbags) | 80 Series 100 Series Sequoia
- Air Lift 60728 Suits Toyota Landcruiser 80 and 100 Series and Lexus LX450 and LX470, Toyota Sequoia 2001-2007 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles up to 2.5″ of lift
- Works with 0-2.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
(3 reviews) -
Tire and WheelTG Hub-Centric Wheel Spacers Pair 6 x 5.5 | From 3/4″ to 2.0″
- Multiple thickness options from 3/4″ up to 2.0″ thick
- 6 x 5.5 Bolt Pattern
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- M12-1.50 Threads
- For Toyota and Lexus Vehicles with Hub-Centric Wheels (must be Hub-Centric)
- See vehicle list down below
- On the ¾” & 1” thick wheel spacers, you will need to trim your wheel studs in order for the wheel to seat on the face of the wheel spacer
- Sold in Pairs
- WARNING! Will not fit vehicles with manual locking hubs!
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(17 reviews)$159.99 Select options This product has multiple variants. The options may be chosen on the product page -
TimbrenTHIS SHIPS FREE
within 48 US StatesTimbren TORSEQ SES Suspension Enhancement System | Toyota and Lexus SUV’s
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series, Sequoia 2001-2007, Land Cruiser Prado 120 and 150
- This is only for use with stock height rear coils – will not work correctly on a lifted vehicle
- Great alternative to airbags, never needs any air or maintenance yet provides the same function
- Reduces sag, sway, and roll when towing and hauling
- Comfortable ride, loaded or unloaded
- DIY installation
- Bolts in where the factory bump stops go
- Zero post-installation maintenance
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(14 reviews) -
Differential | DrivetrainTHIS SHIPS FREE
within 48 US StatesARB RD129 Rear Air Locker Toyota 8.4″ 30 Spline
- For Use only with Toyota 8.4″ 12 Bolt 30 spline Rear Axle
- Suits multiple vehicles, the full list is down below. Used in older Tacoma, Sequoia, Tundra and T100 Trucks.
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(16 reviews) -
Ring and Pinion GearsTHIS SHIPS FREE
within 48 US StatesLongfield Toyota 8.4” Ring & Pinion Gears – 5.29
- Vehicle Fitment list is down below
- Made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.
- The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.
- Higher accuracy and surface finish also produces a quieter-running gear set.
- Gear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.
- Black phosphate coating on ring gear to reduce friction & wear during break-in.
- For Toyota 8.4” rear axles only. Will not fit 8” IFS Clamshell or 8″ solid axles.
- Pinion Spline: 30-Spline
- Ring Gear Bolts: 12 bolts (Ring Gear Bolts not included)
- Ring Gear Diameter: 8.4”
- Ring Gear Rotation: Standard
(3 reviews) -
Sequoia 1st Gen (2001-2007)THIS SHIPS FREE
within 48 US StatesPowerbrake X-Line Front Toyota Sequoia Big Brake Kit for 2001-2007
2001-2007 Toyota Sequoia Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(6 reviews)$3,350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Ring and Pinion GearsTHIS SHIPS FREE
within 48 US StatesLongfield Toyota 8.4” Ring & Pinion Gears – 4.88
- Vehicle Fitment list is down below
- Made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.
- The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.
- Higher accuracy and surface finish also produces a quieter-running gear set.
- Gear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.
- Black phosphate coating on ring gear to reduce friction & wear during break-in.
- For Toyota 8.4” rear axles only. Will not fit 8” IFS Clamshell or 8″ solid axles.
- Pinion Spline: 30-Spline
- Ring Gear Bolts: 12 bolts (Ring Gear Bolts not included)
- Ring Gear Diameter: 8.4”
- Ring Gear Rotation: Standard
(2 reviews) -
Performance Upgrades - Sequoia 1st GenTHIS SHIPS FREE
within 48 US StatesLongfield Super Finish Toyota 8.4” Ring & Pinion Gears – 5.29
- Vehicle Fitment list is down below
- Made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.
- The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.
- Higher accuracy and surface finish also produces a quieter-running gear set.
- Gear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.
- No break-in period.
- Less friction.
- Reduced wear allowing bearings and gears to last longer.
- Treated with REM® Isotropic Super Finishing (ISF) process.
- The REM® Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.
- Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.
- For Toyota 8.4” rear axles only. Will not fit 8” IFS Clamshell or 8″ solid axles.
- Pinion Spline: 30-Spline
- Ring Gear Bolts: 12 bolts (Ring Gear Bolts not included)
- Ring Gear Diameter: 8.4”
- Ring Gear Rotation: Standard
(2 reviews) -
Performance Upgrades - Sequoia 1st GenTHIS SHIPS FREE
within 48 US StatesLongfield Super Finish Toyota 8.4” Ring & Pinion Gears – 4.88
- See Vehicle fitment list down below
- Made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.
- The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.
- Higher accuracy and surface finish also produces a quieter-running gear set.
- Gear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.
- No break-in period.
- Less friction.
- Reduced wear allowing bearings and gears to last longer.
- Treated with REM® Isotropic Super Finishing (ISF) process.
- The REM® Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.
- Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.
- For Toyota 8.4” rear axles only. Will not fit 8” IFS Clamshell or 8″ solid axles.
- Pinion Spline: 30-Spline
- Ring Gear Bolts: 12 bolts (Ring Gear Bolts not included)
- Ring Gear Diameter: 8.4”
- Ring Gear Rotation: Standard
(2 reviews) -
BrakesTHIS SHIPS FREE
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Toyota Sequoia 2001-2007 Rear
- Suits Toyota Sequoia 2001-2007 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(7 reviews) -
Bump Stops + SpacersTHIS SHIPS FREE
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
(0 reviews) -
Bump Stops + SpacersTHIS SHIPS FREE
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mounts
- Universal design threaded weld on bump stop can to hold a 2.2″ body bump stop
- Intended to be used with the Dobinsons HBS59-009 Hydro bumps
- 3mm walls for increased strength
- Sold as a pair
- Ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
(6 reviews) -
Tundra 1st Gen (2000-2006)THIS SHIPS FREE
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tundra Sequoia 2003-2006 Front
- Suits Toyota Sequoia and Toyota Tundra 2003-2006 Only with caliper stamped “13WL” (see attached photo for reference) – 4×4 Models with 6 lug hubs
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(6 reviews)
